Inbay 241178-01-1 Installation Manual

All installation works have to be carried out by professional experts only.
The manufacturer / dealer can not be sued for direct of indirect damages caused from
unprofessional installtion. Technical changes possible.

Installation Manual
Inbay Universal Charging Cup

part-no.: 241178-01-1

For all vehicles equipped with
a cup holder ( diameter Ø 76 - 83 mm )

Suitable for smartphones with a maximum
width of 70 mm (including cover)

kit content

• (1) Inbay Charging Cup - wireless charging station in cup format
including 3 pairs of adjustable spacers and 1 m USB connector cable

• (2) 1 x external USB voltage transformer including connector cable

with fuse holder and 6,3mm blade connectors

• (3) 2x branch connectors 2,5mm² / 2x branch connectors 1 ,5mm²

• (4) spacers providing a perfect t of your smartphone

• (5) 1 x felt adhesive tape

1

2

3

4

5

The Inbay Universal Charger Cup is a wireless charging
cradle in cup-size format. Charging is done inductive

according to Qi-standard and enables charging of all
smartphones with Qi-compatible receiver going hand
in hand with a stable storing in the vehicle‘s cup-holder

=> Find a suitable cup holder in your vehicle
for the Charger Cup and rotate it to the desired

orientation

=> As example for a practice oriented orientation

we recommend a postition from where the display
of the smartphone is fully visible to the driver

=> In order to avoid visible cables the electrical
connection will be connected to the 12V
on-board electrical system of the vehicle

=> The cable routing of the Charging Cup

runs at the bottom or the side of the housing

=> Some vehicles have an opening at the bottom

of the cup holder or they are equipped with a
removable inlay or mat

In this case you can lead the USB connector cable of
the Charging Cup directly through the existing

opening of the center console

Inbay Universal Charging Cup www.inbay.systems