Inaxsys IN-84POEL, IN-88POE User Manual

 8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com

FCC Warning Package Contents

Front Panel (LEDs)

IN-84POEL

User Manual

This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.

CE Warning

This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.

Introduction

This switch provides 8 10/100M ports. It was
designed for easy installation and high
performance in an environment where traffic
is on the network and the number of users
increases continuously.

It consists of 4 PSE/PoE ports. That can
solve the limitation of the power outlet
location and offer the system designer a
flexible solution to locate the network device
everywhere.

The compact rigid desktop size was
specifically designed for small to medium
workgroups. It can be installed where space
is limited; moreover, it provides smooth
network migration and easy upgrade to
network capacity.

Before you start the installation of the
switch, please verify your package that
contains the following items:

 One PoE Fast Ethernet Switch
 One Power Adapter with One Power Cord
 One Quick Installation Guide

Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.

Key Features

 8 Port 10/100M Nway (Auto-negotiation)

Switch with 4 PSE/PoE ports

 Supporting the power Max. 15.4 W for each

PSE/PoE port, and total power consumption
is 40 Watts

 9” Desktop size with metal case



Can be installed in

a 19” cabinet by

rack-mount kits for option

 Auto-learn of networking configurations
 Auto-detect full/half-duplex modes for any

port

 Dedicated full-duplex 200Mbps bandwidth
 Store-and-Forward switching methods
 IEEE 802.3x flow control for full-duplex and

back-pressure flow control for half-duplex

 Non-blocking & Non-head-of-line blocking

full wire speed forwarding

 Auto-MDI/MDI-X function for any port
 Smart plug & play

LED Indicators of 8 Port with 4 Port
PoE 10/100M Switch

LED

Status

Description

Power
On

Power is on.

Off

Power is off.

LINK/ACT

On

Port is for connection.

Off

No connection.

Flashing

Data is transmitting or
receiving

PoE
On

Port is linked to Power
Device

Off

No Power Device is
connected

Connections

Switch/Hub to this 8 Port with 4 Port
PoE Fast Ethernet Switch

This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another
switch without crossover cable.

 8272 Pascal Gagnon  Saint-Leonard, Quebec, Canada  H1P 1Y4  www.inaxsys.com

Standards

IEEE 802.3af
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow control

Features

Number of Ports: 8
10/100BaseT(X) with 4
PSE/PoE Ports
MAC Address: 4K
Buffer Memory: 1.625M
Method: Store and Forward

Filtering/
Forwarding
Rates

100Mbps port – 148,800pps
10Mbps – 14,880pps

Transmission
Media

10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP

LED
Indicators

Per Port: LINK/ACT, PoE
Per Unit: Power

Power Input

DC 48V

Power
Output

48V/DC Per Port Output –

15.4 W Max Per Port

Power
Consumption

40 Watts (Max)

Dimensions

228 × 123 × 44 mm
(L x W x H)

Weight

1kg

Operating
Temperature

0 to 40

Storage
Temperature

-20 to 90

Humidity

10 to 90% RH
(non-condensing)

Certifications

FCC Class A, CE

PC/Other devices to this 8 Port with 4
Port PoE Fast Ethernet Switch

Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.

Power Device to this 8 Port with 4 Port
PoE Fast Ethernet Switch and getting
48V power source through Cat. 5
cables

Using Cat. 5 twisted-pair cable to connect
Power Device to the port 1~8 of this switch,
and then this switch will supply 48V power to
Power Device over Cat. 5 twisted-pair cable.
Please be noted Power Device should also
comply with IEEE 802.3af.

Rear Panel (Power)

Technical Specifications

Power is supplied through an external DC
power adapter.