Inalsa PSG 15GL, PSG 25GL Instruction Manual
Instruction Manual
1
Dear Customer,
Congratulations on the purchase of your INALSA Storage Water Heater ! This has been
designed to include many superior features. You are now on the threshold of a whole new world.
At INALSA, we have a reputation of manufacturing innovative, high quality appliances such as
Food Processors, Mixer Grinders, Juicer Mixer Grinders, Cooking Ranges, Juice Extractors,
Cooktops, Microwave Ovens, Oven Toaster Grillers, Hand Blenders, Electric Kettles, Rice
Cookers, and Electric Chimneys. Your newly acquired INALSA Storage Water Heater bears
the same distinctive hallmark of excellence.
It is all the result of vigorous quality consciousness in INALSA's design and development
where uncompromising standards are maintained and rigid quality control measures are
exercised on raw materials, components and finally, the finished product.
Your INALSA Storage Water Heater has a lot of thoughtful features built in to make your
working convenient. Please read these instructions carefully, so that you may get the best out of
the power packed features in your INALSA Storage Water Heater.
Welcome to the INALSA world of living pleasure!
Parts Identification
S. No. Parts Name
1. Decorating cover
2. Outer casting
3. Temperature meter
4. Temperature control knob
5. Hot water outlet (Red)
6. Multi functional safety valve
7. Cord plug
8. Wall mounting bracket
9. Indicator light - heating
10. Indicator light - power
11. Cold water inlet (Blue)
Technical Specifications*
Model PSG15GL PSG25GL
Rated capacity in Ltr. 15 25
Mounting Vertical
Rated voltage in Volts & frequency in Hz. 230V, 1Ph, 50 Hz, AC
Rated power input in watts 800/1200/2000
Rated Input Current in Amps 8.7
Mean hot water output temp (°C) 60
Rated pressure in Mpa 0.8
Standing loss in KWH/24 hrs/45°C 0.569 0.693
Initial heating time in Mins. 45 65
Reheating time in Mins to raise to 50°C 35 45
Mixing factor maximum (%) 30%
Weight of water heater in Kg. empty 9 12
Weight of water heater with full tank 24 37
Water proof degree IPX4
Class of Appliance Class 1
Outer Casing Rust proof ABS
Indicator Power, Heating
Water tank material Ultra thick superior cold rolled steel with
vitreous enamel coating
2
1 7
8
4
11
6
9
5
2
3
10
Heating element SS 800 Glass lined
Thermostat range 10 - 75°C
Thermal cut out Pre set at 93°C
Additional safety device Multi functional safety valve
* Due to continuous improvements in product, specifications are subject to change without prior notice.
Key features
1. Vitreous enamel coated tank with single weld line design.
a) Made of Ultra thick super cold rolled steel plate.
b) Provides more corrosion resistance and anti-rust properly compared to standard
inner tank designs resulting longer life.
c) Single weld line on the inner tank eliminates the risk of water leakage.
d) A die-hard life span for inner tank and more than 25% strength than S.S. Tank
ensured by multiple on line testing including.
1. Uric Acid Test
2. Anti Alkaline Test
3. Fatigue Test
4. Environment Synchronization Test
2. Heavy duty anode rod protects tank from corrosion
With steel core. magnesium anode rod protects enameled tank from rust and corrosion.
3. SS 800 Glass lined heating element
High quality heating element offers superior heating performance with its excellent
resistance to both oxidation & carbonization at high temperature setting. Also resists
erosion against most extreme and hard water conditions thus extending life span of
heating element with minimum energy loss.
4. Energy saving high density puf insulation
CFC free thicker PUF insulation offers complete protection against radiant heat loss.
5. Water tubes with whirl flow
The whirl flow ensures no immediate direct contact between cold and hot water for a
faster heating and maximum energy saving effect.
6. Thermal cut out
Cuts off electric power to guarantee safety, in case the water temperature exceeds the
highest temperature exceeds the highest temperature. Beyond Pre-set of the thermostat
3
PUF
Energy Saving
Insulation
75°c
10°c
Loading...