Juice
Extractor
Instruction Manual
Dear Customer,
Congratulations on the purchase of your INALSA Juice Extractor! This has been designed to
include many superior features that permit you the fullest expression of your juicing skill and
enthusiasm. You are now on the threshold of a whole new world of juicing pleasure.
At INALSA, we have a reputation of selling innovative, high quality appliances such as Food
Processors, Mixer Grinders, Juicer Mixer Grinders, Cooking Ranges, Juice Extractors,
Cooktops, Microwave Ovens, Oven Toaster Grillers, Hand Blenders, Electric Kettles, Rice
Cookers, and Electric Chimneys. Your newly acquired INALSA Juice Extractor bears the
same distinctive hallmark of excellence.
It is all the result of vigorous quality consciousness in INALSA's design and development
where uncompromising standards are maintained and rigid quality control measures are
exercised on raw materials, components and finally, the finished product.
Your INALSA Juice Extractor has a lot of thoughtful features built in to make your juicing
convenient. Please read these instructions carefully, so that you may get the best out of the
power packed features in your INALSA Juice Extractor.
Welcome to the INALSA world of juicing pleasure!
1
Parts Identification
Technical Specification*
Part No. Parts Name
1. Food pusher
2. Top cover
3. Safety lock
4. Juice container
5. Rubber pad
6. Bottom
7. Pulp container
Model Boost
Wattage 500W
Voltage 230V AC-50Hz.
Capacity Juicer container - 300mls, pulp container - 500mls
Cord Plug 1.2 metre long PVC cord with 2 pin plug
* Due to continuous improvements in product, specifications are subject to change without prior notice.
2
1
2
3
4
5
6
7
3
Important Instructions
We have paid special attention to the safety of this household appliance during designing
and manufacturing. However the user should also use and take care of them properly.
Here are the instructions for this Juice Extractor. Please read it completely and carefully
before using.
Safety instructions
1. When using for the first time, remove all packing materials and wash the jars with warm
water. Rinse and dry thoroughly.
2. Don't leave unit unattended while it is running, never let children to operate the unit.
3. Unplug the juicer from power outlet when not in use, before putting on or taking out the
parts and before cleaning.
4. Keep hand and utensils out of fruit feeder while processing to prevent the possibility of
accidents. Use food pusher supplied with the unit to dislodge the food jammed in the
feeder tube.
5. Please note if food becomes jammed and can't be dislodged using the food pusher, turn
the unit OFF, unplug from the outlet and disassemble the unit to remove food.
6. Juicing cutter is sharp, handle carefully .
7. To avoid injury, never place juicing mesh on the unit without pulp collector properly
attached.
8. Use this product with rated AC voltage and frequency only.
9. If the power cord is damaged, do not use this appliance and contact to our authorized
services center.
10. This Juice Extractor has built in safety switch when the clamp is not fastened, the motor
can't run.
11. The product has a built in circuit breaker for protection of motor.
12. This product should not be run for more than 3 minutes continuously.
Note
1. To prevent food from jamming, do not put food into the feeder tube unless the motor is
running.
2. For large quantities when the Juice jar is ¾ full, empty contents into a large container.
Empty the pulp collector when it is half full.
If food become jammed and can't be dislodged quickly using the food pusher. Follow
these steps to prevent damage to the unit.
a) Switch the unit OFF immediately and unplug from electrical outlet.
b) Lift clamps and disassemble the unit to remove food.
4
How to use
1. Assemble the juicer and put the safety looks on.
2. Place the juice and pulp container jars in place.
.3. Plug the juicer to the power source.
4. Switch the unit ON
5. Cut the fruits into small pieces and put into the juicer through the feeder tube.
6. Push the fruits with the food pusher.
7. Juice and pulp will start collecting in the juice and pulp collector respectively. Empty the
two containers as soon as they are about to be full.
Cleaning & Maintenance
1. Place the base on a dry flat surface
2. Clean Food Pusher, Cover, Pulp Collector, and Juicer mesh with soapy water and rinse
thoroughly. To remove pulp from Juicer mesh, hold bottom side facing up under running
water and gently scrub with a soft nylon brush.
3. To protect against risk of electrical shock do not put the main unit in water or other
liquids.
4. Never use gas or alcohol to clean any part of the unit. Never put any part of the Juice
Extractor in dishwasher or boiling water.
5. If not in use please put the juicer in a dry place to protect the motor. It is good to use the
unit frequently.
Loading...