Einführung 3
Merkmale und Verpackungsinhalt 3
Anschlussplan 4
Anschluss und Betrieb 5
IR-Fernbediehnung 6
Bedienung an Gerät 6
Fehlerbehebung 7
Hinweise 7
Introduction 8
Features and contents 8
Connction and illustration 9
Connection and operation 10
IR romote operation 11
Operation on device 11
Trouble shooting 12
Notice 12
[Texteingeben]
03
Exzellenz HDMI 4x2 Cross Switch High Speed/S/P
-
DIF
BEDIENUNG
Alle Schaltvarianten | 4 Eingänge | 2 Ausgänge
BEDIEHNUNG
Einführung
Wir beglückwünschen Sie zum Erwerb des Exzellenz HDMI Cross Switch. Wir legen Wert darauf, dass Sie
mit Ihrem Kauf zufrieden sind. Unsere HDMI-Produktserie wurde entwickelt, um Ihnen den Umgang mit
Ihren Video- und Audiogeräten zu erleichtern. Die Exzellenz HDMI Cross Switch ist das ideale Gerät für Ihr
Home Theater, für den Einsatz in Bars mit Entertainment-Systemen oder zur Verteilung von HD-Quellen
auf zwei Räume. Mithilfe des parallelen digitalen SPDIF-Audio-Koaxialausgangs kann der Anwender
problemlos das digitale Audiosignal der vier Quellen nutzen, indem er ein Audio-Koaxialkabel mit einem
Home-Theater-System, das nicht HDMI-fähig ist, verbindet. Dank der Splitter- und Matrixfunktion ist der
Anwender in der Lage, dasselbe Quellgerät auf zwei 2 HD-Fernsehgeräte (oder Projektoren) zu verteilen,
wobei auch die Möglichkeit besteht, dass jedes HD-Fernsehgerät (bzw. jeder Projektor) eine der
Eingangsquellen unabhängig nutzt.
Merkmale und Verpackungsinhalt
Um die Exzellenz HDMI Cross Switch in vollem Umfang nutzen zu können, lesen Sie diese Anleitung bitte
sorgfältig durch und bewahren Sie sie auf.
Merkmale:
•unterstützt 1080p/12-Bit Deep Color HDTV
•unterstützt HDMI 3D Videoformate
•unterstützt Pixel-Taktfrequenzen bis zu 3x 2,25 Gbrs (6,75 Gbrs)
•Exzellenz HDMI Cross Switch mit 4 Eingängen und 2 Ausgängen
•Für jeden Ausgang ist eine andere Quelle aus den vier Eingängen wählbar.
•Beide Ausgänge können dieselbe Eingangsquelle verwenden.
•Ausgang A bietet parallel einen digitalen S/PDIF-Audioausgang für ein nicht HDMI-fähiges Home-
Theater-System.
•unterstützt HDCP 2.0
•konform mit verlustfreien digitalen Audioformaten wie DTS
•vergoldete Anschlüsse
•Infrarot-Fernbedienung
•formschönes, abgeschirmtes Metallgehäuse
•Highest Common Factor: Der Umschalter erkennt automatisch das bestmögliche Auflösungsformat
für beide Ausgänge
•Maße: 22 x 7 x 3cm
®
HD, Dolby® TrueHD
3D Videoformate
Frame packing: 1920x1080p@23.98/24Hz
1280x720p@59.94/60Hz
1280x720p@50Hz
Side-by-Side (Half): 1920x1080i@59.94/60Hz
1920x1080i@50Hz
Top-and-Bottom: 1920x1080p@23.98/24Hz
1280x720p@59.94/60Hz
1280x720p@50Hz
04
BEDIENUNG
Zwei-Räume
-
Variante:
PC Salellite Receiver PS3™ Blu
-
ray-Player
Home
-
Theatre
-
System
PC Salellite Receiver PS3™ Blu
-
ray-Player
Verpackungsinhalt
• Netzteil 5 V/2 A DC
• Fernbedienung
• Exzellenz HDMI Cross Switch 4 IN/2 OUT
• Gebrauchsanleitung
Anschlussplan
Home-Theater-Variante:
[Texteingeben]
05
BEDIENUNG
Splitter
-
Betrieb
A
C
C
C
C
C
ABCD
Splitterbetrieb:
Wähle unters
chiedliche Signale
Teile ein Signal
Hinweise:
• Output-A bietet zusätzlich einen unmodifizierten digitalen SPDIF-Audio-Ausgang. Er lässt sich mit
einem Home-Theater-System verbinden, das mit digitalem Audio-Eingang ausgelegt ist.
Der digitale SPDIF Audio-Ausgang bezieht sich auf das am Output A angeschlossene Display.
• Wenn das angeschlossene Display nur ein Stereo-Signale verarbeiten kann gibt die Quelle auch nur
ein Stereosignal aus. Lesen sie hierzu die Bedienungsanleitung der Quellengeräte.
• Einstellen des Formats des Audioausgangs: (Informieren Sie sich bitte in der Anleitung des
Quellgeräts.)
•Überprüfen Sie, welches Audioformat der gewünschte Film unterstützt. (Stereo, DTS® 5.1 und
Dolby® Digital 5.1 usw.)
•Stellen Sie das Audio-Ausgangsformat des Quellgeräts ein. Beispielsweise unkomprimierte PCM oder
Bit Stream (Dolby® Digital 5.1, DTS® 5.1 usw.)
• Wählen Sie im Hauptmenü das Audio-Ausgangsformat und die Sprache.
• Wenn das Audio-Ausgangsformat vom angeschlossenen Endgerät (HDTV, Home Theater Receiver,
Aktivbox) nicht unterstützt wird, hören Sie möglicherweise Störgeräusche oder keinen Ton aus den
Lautsprechern.
• Wenn Sie zur Ausgabe des Audiosignals ein Home-Theater-System oder ein anderes
Lautsprechersystem benutzen möchten, empfehlen wir, den HDTV-Lautsprecher abzuschalten.
• Die Exzellenz HDMI Cross Switch ist mit dem Erkennungsmodus „Highest Common Factor“ (größter
gemeinsamer Teiler) ausgerüstet. Wenn sie als Splitter genutzt wird, wird das Endgerät mit dem
niedrigeren Standard als primäres Gerät festgelegt.
•Wir empfehlen, Endgeräte (HDTV, Projektor, Home Theater Receiver usw.) und Quellgeräte (Blueray Player, PS3 usw.) zu verwenden, die die höchstmögliche Auflösung und Farbtiefe sowie das
fortschrittlichste Audioformat unterstützen.
•Batterien dürfen nur im entladenen Zustand bei den Rücknahmestellen abgegeben werden.
Zudem soll Vorsorge gegen Kurzschlüsse getroffen werden (z.B. durch das Isolieren der pole mit
Klebestreifen).
Anschluss und Betrieb
Anschluss
Schritt 1: Verbinden Sie das 5-V-Netzteil mit der Exzellenz HDMI Cross Switch.
Schritt 2: Verbinden Sie die von den HD-Quellen (PS3, DVD Player, Blue-ray DVD Player usw. kommenden
HDMI-Kabel mit Eingängen der Exzellenz HDMI Cross Switch.
Schritt 3: Verbinden Sie das von Ihrem HD-Gerät (HDTV oder Projektor) kommende HDMI-Kabel mit dem
Ausgang (Output-A oder Output-B) der Exzellenz HDMI Cross Switch.
Ausgang A verfügt über einen zusätzlichen digitalen SPDIF-Audioausgang. Wenn Ihr Home-
Theater- oder Audiosystem kein HDMI-Eingangssignal unterstützt, können Sie den digitalen
Audioausgang über ein Koaxialkabel mit Ihrem Home-Theater- oder Audiosystem verbinden.
Schritt4: Wenn Sie die Verbindungen hergestellt haben, leuchten die LEDs Active-A (bzw. Active-B) rot
Und die Eingangs-LED grün auf.
Betrieb
A B C D
Matrixbetrieb:
A B C D
06
BEDIENUNG
unterstützt wird. (Wenn der Anwender
Ausgangsmodus
Splitter-
Betrieb
Ausgänge A
und B auf
dasselbe
Quellgerät
geschaltet
Ausgänge A
Matrixbetrieb
und B auf
gesonderte
Quellgeräte
geschaltet
IR-Fernbedienung
•Für die Ausgänge A und B ist je ein Satz Ein/Aus- und Auswahltasten
vorhanden. Die Ausgänge A und B lassen sich somit einzeln steuern.
•Ausgang A: Schalten Sie die Signalübertragung für den Ausgang A
mittels der Ein/Aus-Taste auf der Fernbedienung ein. Die LED-Anzeige
(Active-A) für den Ausgang A auf der Frontplatte leuchtet auf. Drücken Sie
die Ein/Aus-Taste für den Ausgang A erneut, um den Ausgang in den
Standby-Modus zu schalten. Mittels der Nummerntasten schalten Sie
zwischen den Quellen um.
•Ausgang B: Schalten Sie die Signalübertragung für den Ausgang B
mittels der Ein/Aus-Taste auf der Fernbedienung ein. Die LED-Anzeige
(Active-B) für den Ausgang B auf der Frontplatte leuchtet auf. Drücken Sie
die Ein/Aus-Taste für den Ausgang B erneut, um den Ausgang in den
Standby-Modus zu schalten. Mittels der Nummerntasten schalten Sie
zwischen den Quellen um.
•Rücksetzen: Mittels der Reset-Taste auf der Fernbedienung versetzen Sie
die Exzellenz HDMI Cross Switch wieder in ihren ursprünglichen Status.
Automatische Erkennung und Einstellung
des Quellgeräts
Unterstützt Nicht unterstützt
Das Quellgerät stellt automatisch die Audio-
und Video-Ausgangssignale ein, die von den
mit den Ausgängen A und B verbundenen
Endgeräten unterstützt werden. Eines der
Endgeräte wird als primäres Endgerät
festgelegt (Erkennungsmodus „Highest
Common Factor“).
Die Audio-/Videoausgangssignale können
auch vom Anwender eingestellt werden.
Achten Sie bitte darauf, dass die Einstellung
von den Endgeräten unterstützt wird.
Das Quellgerät stellt automatisch die Audio-
und Video-Ausgangssignale ein, die von den
Endgeräten unterstützt werden (Ausgang A
oder B).
Die Audio-/Videoausgangssignale können
auch vom Anwender eingestellt werden.
Achten Sie bitte darauf, dass die Einstellung
von den Endgeräten unterstützt wird.
Das Audio- und Videosignal des
Quellgeräts muss zuerst eingestellt
werden.
Achten Sie bitte darauf, dass die
Einstellung von den Endgeräten
die Quelle z. B. so einstellt, dass ein
1080p-Videosignal gesendet wird, das
Endgerät aber nur bis zu 720p oder
1080i unterstützt, zeigt das Endgerät
kein Bild.)
Das Audio- und Videosignal des
Quellgeräts muss zuerst eingestellt
werden.
Achten Sie bitte darauf, dass die
Einstellung von den Endgeräten
unterstützt wird.
Bedienung an Gerät
• Die Ausgänge A und B verfügen über eine gesonderte Quellenauswahl und Ein/Aus-Steuerung.
• Ausgang A: Die Ein/Aus-Taste („Select/Power“) ist eine Multifunktionstaste.
Ein/Aus-Steuerung: Halten Sie die Taste „Select/Power“ 2 Sekunden gedrückt, um den
Ausgang in den Standby-Modus zu schalten; drücken Sie die Ein/Aus-Taste ein Mal, um ihn
einzuschalten. Quellenauswahl: Wenn Sie den Eingangskanal manuell wechseln möchten,
drücken Sie die Taste „Select/Power“ ein Mal. Eine aufleuchtende LED zeigt den aktiven Kanal an.
•Ausgang B: Die Ein/Aus-Taste („Select/Power“) ist eine Multifunktionstaste.
Ein/Aus-Steuerung: Halten Sie die Taste 2 Sekunden gedrückt, um den Ausgang in den
Standby-Modus zu schalten; drücken Sie die Taste „Select/Power“ ein Mal, um ihn einzuschalten.
Quellenauswahl: Wenn Sie den Eingangskanal manuell wechseln möchten, drücken Sie die
Taste „Select/Power“ ein Mal. Eine aufleuchtende LED zeigt den aktiven Kanal an.
•Rücksetzen: Mittels der Reset-Taste an der Rückseite des Geräts versetzen Sie die Exzellenz
HDMI Cross Switch wieder in ihren ursprünglichen Status.
[Texteingeben]
07
BEDIEHNUNG
Fehlerbehebung
1. Wenn kein Bild angezeigt wird, prüfen Sie bitte Folgendes:
•Vergewissern Sie sich, dass die Direktverbindung vom Quellgerät zum Endgerät ohne die Exzellenz
HDMI Cross Switch funktioniert.
• Überprüfen Sie alle Anschlüsse und Verbinder.
• Vergewissern Sie sich, dass das Anschlusskabel unbeschädigt ist.
• Vergewissern Sie sich, dass die Exzellenz HDMI Cross Switch eingeschaltet ist (oder setzen Sie das
Gerät zurück).
2. Wenn nur ein Bild, aber kein Ton ausgegeben wird:
• Prüfen Sie die Kabelverbindung auf korrekten Sitz.
• Überprüfen Sie, ob Ihr Quellengerät nur die Übertragung von Videosignalen (DVI) unterstützten oder
beschädigt ist.
•Es ist möglich, dass HDCP beim ersten Anschließen nicht richtig funktioniert. Setzen Sie bitte Ihre
Exzellenz HDMI Cross Switch zurück.
•Haben Sie einen Ausgang an Ihren DVD-Recorder angeschlossen? HDCP sperrt das Audiosignal.
3. Wenn die Exzellenz HDMI Cross Switch über ein Digitalkabel mit einem Home-Theater-System verbunden
wird,erhält das Home-Theater-System kein Audiosignal.
• Überprüfen Sie bitte die Verbindung.
• Das Digitalkabel muss mit dem Koaxial-Audioeingang des Home-Theater-Systems verbunden werden.
• Der Audioeingang des Home-Theater-Systems muss auf einen entsprechenden Digitaleingang
geschaltet werden.
•Achten Sie bitte darauf, dass Ihr Home-Theater-System das Audio-Ausgangsformat unterstützt. Wenn
es sich bei dem Audioformat um Dolby® oder DTS® handelt, muss das Home Theater die Dolby®- bzw.
DTS®-Decodierung unterstützen.
4. Wenn die Exzellenz HDMI Cross Switch über ein Digitalkabel mit einem Home-Theater-System
verbunden wird, liefert der Koaxial-Audioausgang nur ein Stereo-Audiosignal an das Home-Theater-
System.
• Da das mit dem Ausgang A verbundene HD-Fernsehgerät (bzw. der Projektor) nur ein StereoAudiosignal unterstützt, gibt der Koaxial-Audioausgang das dem Ausgang A entsprechende Audiosignal
aus.
•Hinweise zum Einstellen des Audio-Ausgangsformats finden Sie auf Seite 2.
5. Wenn die Auflösung nicht im 1080p-Format angezeigt wird:
• Vergewissern Sie sich, dass Ihre Quell- (HD DVD Player) und Endgeräte voll 1080p-fähig sind.
•
Vergewissern Sie sich, dass Ihre HDMI-Kabel ein 1080p-Videosignal übertragen können
6. Wenn Ihr Gerät kein 3D-Bild anzeigt:
•Vergewissern Sie sich, dass Ihre Quell- und Anzeigegeräte die 3D-Funktion sowie dasselbe 3D-Format
unterstützen.
•Vergewissern Sie sich, dass der Abspielmodus (Videoausgang) des Blu-ray Players auf 3D oder AUTO
eingestellt ist.
•Vergewissern Sie sich, dass der Video-Inhalt das 3D-Format besitzt.
.
7. Wenn das Bild nicht ordnungsgemäß in 3D angezeigt wird, überprüfen Sie bitte, ob das 3D-Format Ihrer
Quell- (BD Player, PS3 usw.) und Anzeigegeräte (Fernsehgerät oder Projektor) richtig eingestellt ist.
8. Wenn das Bild spiegelbildlich angezeigt wird (mit senkrechter oder waagerechter Symmetrieachse),
vergewissern Sie sich, dass das Fernsehgerät bzw. der Projektor das 3D-Format unterstützt und die 3DFunktion aktiviert ist. Wenn das Fernsehgerät bzw. der Projektor das 3D-Videoformat nicht unterstützt,
schalten Sie den 3D-Abspielmodus der Quellgeräte bitte aus.
Hinweise
•Der Hersteller behält sich Änderungen an Gerät, Verpackung und an jeglicher mitgelieferter
Dokumentation ohne vorherige schriftliche Ankündigung vor.
•HDMI, das HDMI-Logo und High-Definition Multimedia Interface sind Marken oder eingetragene
Marken der HDMI Licensing LLC.
• Im Gerät Exzellenz HDMI Cross Switch ist HDMI
• Marken und Markennamen sind Eigentum der jeweiligen Inhaber.
• PS3 ist eine Marke von Sony Computer Entertainment Inc.
• Dolby ist eine eingetragene Marke von Dolby Laboratories.
• DTS ist eine eingetragene Marke und die DTS-Logos und das Symbol sind Marken von DTS, Inc.
TM
-Technik enthalten.
08
Exzellenz HDMI 4x2 Cross Switch High Speed/S/P
-
DIF
OPERATION MANUAL
Full Matrix Selection |
Introduction
4
inputs | 2 outputs
Congratulations on your purchase of the Exzellenz HDMI Cross Switch. Your satisfaction is very important
to us. Our series of HDMI products are designed to make the use of your home entertainment equipments
more comfortable. Exzellenz HDMI Cross Switch is an ideal product for Home Theater application, Sports
Bar application, or share HD sources to 2 different rooms. The feature designed SPDIF digital audio output
(Coaxial) makes users easily to share the digital audio of the 4 source devices by connect one coaxial audio
cable to a Home Theater system, which does not support HDMI connection. With the splitter and matrix
function, users can share the same source device to 2 HDTVs (or projectors); also each HDTV (or
projector) can be set to use one of the input source devices independently.
Features and Contents
For the best performance of this matrix switch box, please read this manual carefully and keep it for
further information.
Features:
• Support 1080P/12-Bit Deep Color HDTV
• Supports 3D HDMI video formats
• Support Pixel Clock Rate up to 3x 2,25 Gbrs (6,75 Gbrs)
• 4 inputs and 2 outputs Exzellenz HDMI Cross Switch
• Each output can select different source from one of the 4 inputs
• Both outputs can select from the same input source
• Output-A support a digital S/PDIF audio output for non-HDMI Home Theater system
• Support HDCP 2.0
• DTS® HD, Dolby® TrueHD lossless compressed digital audio compliant
• Gold plated connectors
• IR remote control
• Stylish metal housing design, free of interference
• Highest Common Factor
• Dimensions: 22 x 7 x 3cm
3D video formats
Frame packing: 1920x1080p@23.98/24Hz
1280x720p@59.94/60Hz
1280x720p@50Hz
Side-by-Side (Half): 1920x1080i@59.94/60Hz
1920x1080i@50Hz
Top-and-Bottom: 1920x1080p@23.98/24Hz
1280x720p@59.94/60Hz
1280x720p@50Hz
[Texteingeben]
09
OPERATION MAN
UAL
PC Salellite Receiver PS3™
Blu-ray-Player
PC Salellite Receiver PS3™ Blu
-
ray-Player
Home
-
Theatre
-
System
Content of Package
• DC 5V/2A power adaptor
• Remote control unit
• 4-IN / 2-OUT Exzellenz HDMI Cross Switch
• User’s Manual
Connection and Illustration
Home Theater Application:
Two Rooms Application:
10
A
C
C
C
C
C
ABCD
Splitter Mode:
Select different signal
Share same signal
OPERATION MANUAL
Note:
•Output-A supports an unmodified SPDIF (coaxial) digital audio output. Users can use it to connect
to a Home Theater system which supports a coaxial digital audio input.
•The output of the SPDIF (Coaxial) digital audio format is based on the HDMI Output-A. If the sink
devices (HDTV or Projector), which connected to Output A and Output B, can only support stereo
audio, the coaxial digital audio may also send out PCM stereo audio.
• For audio output format adjustment: (Please refer to the source device manual.)
• Check the supported audio format of the feature film. (Stereo, DTS® 5.1, and Dolby® Digital
5.1...etc)
•Set the audio output format of source device. Ex. uncompressed PCM or Bit Stream (Dolby® Digital
5.1, DTS® 5.1 ...etc.)
• Select the output of audio format and language from the main feature menu.
• For HD quality audio (Dolby® TrueHD, DTS-HD Master AudioTM), or other audio formats that need
high bandwidth for audio transmission, please use HDMI connection for the HD audio transmission.
•If the output audio format is not supported by the sink device (HDTV, Home Theater receiver,
Sound Bar Speaker), you may hear noise form the speakers or you will not hear any sound from the
speakers.
•If you want to use a Home Theater System or other speaker system for audio output, it is
recommended to mute the audio speaker of the HDTV.
•Exzellenz HDMI Cross Switch is designed with Highest Common Factor detection mode. When use it
in the splitter function, the sink device with lower standard will be set as the primary device.
•It is recommended all connected sink devices (HDTV, Projector, Home Theater Receiver…etc.) and
sources device (Blue-ray Player, PS3…etc.) support same highest resolution, color deep and audio
format.
•Batteries must be placed in empty state at the collection points.
In addition to precautions take care against short circuits (e.g. by isolating the pole with tape).
Connection and operation
Connection
Step 1: Connect the DC 5V power adaptor to the Exzellenz HDMI Cross Switch.
Step 2: Connect the HDMI cables from the HD sources (PS3, DVD player, Blue Ray DVD Player…etc) to the
input ports of the Exzellenz HDMI Cross Switch.
Step 3: Connect the HDMI cables from your HD display (HDTV or projector) to the output port (Port A or
Output Port A support additional SPDIF digital audio output. If your Home Theater (or Sound
Step 4: After you finish the connection, the Active-A (or Active-B) indication LED (red), and input indication
LED (green) will be lighted on.
Operation
MatrixMode:
A B C D
A B C D
SplitterMode:
Port B) of the Exzellenz HDMI Cross Switch.
System) doesn’t support HDMI input, you can use a coaxial audio cable to connect the digital audio
to your Home Theater (or Sound System).
[Texteingeben]
11
both be supported by the sink devices of
720p or 1080i, you will not have
IR remote operation
OPERATION MANUAL
Source Device Auto Detection & Auto Adjustment
Supported Not Supported
The output audio and video
Please make sure the setting
The output audio and video
Please make sure the setting
Splitter
Mode
Matrix
Mode
Output Mode
Output A & Output
B Select to a same
source device
Output A & Output
B Select to
separate source
devices
The source device will auto adjust the
output audio and video signal which can
Output A and Output B. One of the sink
devices will be set as the primary sink
device. (Highest Common Factor
detection mode)
Users can also set the audio/video
output signal by themselves. Please
make sure the setting can be supported
by the sink devices.
The source device will auto adjust the
output audio and video signal that
supported by the sink devices (Output A
or Output B).
Users can also set the audio/video
output signal by themselves. Please
make sure the setting can be supported
by the sink devices.
•Two sets of power and selection keys are available for Output A and Output
B. The power and selection of Output A and Output B can be controlled
individually.
•Output A: Use the power key of Output A on the IR remote controller to
turn on the signal transmission of Output A. The power indication LED
(Active-A) of Output A on the front panel will be lighted on. Press the power
key of Output A one more time to turn the Output A to standby. Use number
keys to switch between sources.
•Output B: Use the power key of Output B on the IR remote controller to
turn on the signal transmission of Output B. The power indication LED
(Active-B) of Output B on the front panel will be lighted on. Press the power
key of Output B one more time to turn the Output B to standby. Use number
keys to switch between sources.
•Reset: Use the Reset key on the IR remote controller to reset the Exzellenz
HDMI Cross Switch to the initial status.
signal of the source device
needs to be set first.
can be supported by the sink
devices. (For example, if user
set the source to send out a
1080p video signal, but the sink
device can only support up to
picture the sink device.)
signal of the source device
needs to be set first.
can be supported by the sink
devices.
Manual operation
• Output A and Output B have individual source selection and power control key.
• Output A: The “Select/Power” key is a multi-function key.
Power Control: Press the “Select/Power” key for 2 seconds to turn off the power (Standby);
press the “Select/Power” key once to turn on the switcher.
Source Selection: If you want to change the input channel manually, you can press the
“Select/Power” key once. A LED will be lighted up for the channel indication.
•Output B: The “Select/Power” key is a multi-function key.
Power Control: Press the button for 2 seconds to turn off the power (Standby); press the
“Select/Power” key once to turn on the switcher.
Source Selection: If you want to change the input channel manually, you can press the
“Select/Power” key once. A LED will be lighted up for the channel indication.
•Reset: Use the Reset key on the back of the Exzellenz HDMI Cross Switch to reset the Exzellenz
HDMI Cross Switch to the initial status.
12
OPERATION MAN
UAL
Trouble shooting
1. When there is no picture present, please:
•Make sure the direct connection from the source device to the display device without the Exzellenz
HDMI Cross Switch is working.
• Check all connectors connect well or not.
• Check the connecting cable is damaged or not.
• Check the power of Exzellenz HDMI Cross Switch (or reset the switcher)
2. When there is only picture displayed and without sound:
• Check the cable connection to see if it fits properly.
• Check your cable to see if it supports video transmission only (DVI) or it is damaged.
• HDCP may not match very well at first connection; please reset your Exzellenz HDMI Cross
Switch.
•Do you connect any output to your Video recorder? HDCP will lock up audio part.
3. When use a coaxial audio cable to connect the Exzellenz HDMI Cross Switch to a Home Theater
System, no sound is delivered by the Home Theater System.
• Please check the connection.
• The coaxial audio cable needs be connected to the coaxial audio input port of the Home Theater
System.
•The audio input selection of the Home Theater System needs be selected to a corresponding
coaxial audio input.
•Please make sure the output audio format can be supported by the Home Theater System. If the
audio format is in Dolby® or DTS® format, the Home Theater needs to support Dolby® or DTS®
decoding.
4. When use a coaxial audio cable to connect the Exzellenz HDMI Cross Switch to a Home Theater
System, the coaxial audio output only delivers stereo audio signal to the Home Theater System.
•Because the HDTV (or Projector) which connected to the Output-A can only support stereo audio
signal, the coaxial audio output will send out the audio signal based on the Output-A.
•Please refer to the page 3 for audio output format adjustment.
5. When resolution could not show in 1080p.
• Make sure your sources (HD DVD Player) and displays are fully supporting 1080p.
• Make sure your HDMI cables are capable of transmit 1080P video signal.
6. When 3D content could not be shown on your display.
•Please make sure your sources and displays are 3D supported devices and also support the same
3D format.
•Please check the play mode of Blue-ray player has been set 3D mode or AUTO mode for video
output
•Please make sure the video content is 3D content.
7. If the presented picture is not a proper 3D image, please check whether the 3D format of your
sources (BD player, PS3, etc.) and displays (TV or projector) are correct setting.
8. If the presented picture is symmetric, which showed with up and down or right and left symmetric
image, please check whether the TV or projector supports 3D display function and make sure the
function is enabled. If the TV or projector does not support 3D video format, please turn off the 3D
play mode of sources
Notice
•Manufacturer reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
•HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.