IN2UIT BoomPack Owner's Manual
IN2UITBOOMPACK
1
OWNER’S MANUAL
Dear Audiophile,
Thank you for purchasing ‘BoomPack’ by IN2UIT. BoomPack features hi-end electrostatic tweeters using
the proprietary SBESL (Self-Biased ElectroStatic Loudspeaker) acoustic technology that we refer to as
ELECTROSTATZ® Technology. The acoustic performance and reproduction are of the highest quality and
level, revitalizing your many familiar sounding recordings into a new listening experience.
2
PACKAGE CONTENTS
GETTING STARTED
OVERVIEW
OPERATING
CARE AND MAINTENANCE
CONTACTING CUSTOMER SERVICE
TROUBLESHOOTING
WARRANTY
TECHNICAL SPECIFICATIONS
APPENDIX
4
5
9
11
20
21
21
22
23
24
3
BoomPack - Bluetooth mobile speaker device X1
BoomPack - Bluetooth keyboard (optional) X1
5V / 1A DC power adaptor
(separated plug)
(micro USB charger) X1
Owner’s manual X1
1
2
3
4
PACKAGE CONTENTS
4
1
23 4
The ELECTROSTATZ® tweeters are positioned in the rear of the BoomPack case and held in position by
hinges for convenient opening and closing. To avoid damage, not open/close or pull on the ELECTROSTATZ™
tweeters with too much force and do not over extend the tweeters past the engaged listening position. Do
not use the extended tweeters as handles when carrying or moving the BoomPack.
In the closed position the ELECTROSTATZ® tweeters engage to the rear of the case with
magnets that hold the panels shut for convenient mobility and storage.
For the best acoustic performance, the Electrostatz tweeters should always be fully opened and
facing the user when listening to BoomPack’s audio playback.
To open the tweeters, gently rotate both panels outwards from the closed position to the
engaged, listening position. The panels should be rotated until flush with the back surface of the
rear case when fully engaged. Do not over extend the tweeters past the flush, engaged position
as this will damage or break the Electrostatz tweeter panels.
1
2
3
OPENING ELECTROSTATZ® TWEETERS
5
4
5
6
When fully opened and engaged the ELECTROSTATZ® tweeters will physically lock into position
and and the user will feel and hear the panels ‘click’ into position.
To close panels, follow the above instructions in reverse order.
NOTICE!
To avoid electric shock do not use sharp objects such as pens or needles to prod or puncture
ELECTROSTATZ® tweeters.
The display cover instantly attaches to the
BoomPack with the magnetic tabs.
In the closed position, the cover attaches to
the front side of the BoomPack. Pull on the
magnetic tab to open the cover.
1
7
USING THE COVER AS A STAND
8
When the cover is folded up to act as a BoomPack stand, magnets inside the
cover automatically attach to the rear, protruding area on the case. In the
folded position the cover acts as a sturdy base.
Lean the BoomPack against the folded up cover for a sturdy base and stand.
2
3
Loading...