(0.75)
19.1
(2.2) 55.9
Swaged
Standoff
thru Hole
(0.15) 3.2
Diameter
Nylon
Standoff
6/32 Thd.
131415161718192021222301234567891011121234567891011121314151617181920212223242526272829303132333435363738394041424344454647
31
Phone
(330) 762-
Fax:
(330) 762-
E-mai
SALES@
wrcakron.c
Webs
http://www
wrcakron.c
Power Side Signal Side
Power Side Signal Side Power Side Signal Side
Bit
Pos. Neg. Signal DC Return Bit Pos. Neg. Signal DC Return Bit Pos. Neg. Signal DC Return
Bit 0 1 2 47 48 Bit 8 17 18 31 32 Bit 16 33 34 15 16
Bit 1 3 4 45 46 Bit 9 19 20 29 30 Bit 17 35 36 13 14
Bit 2 5 6 43 44 Bit 10 21 22 27 28 Bit 18 37 38 11 12
Bit 3 7 8 41 42 Bit 11 23 24 25 26 Bit 19 39 40 9 10
Bit 4 9 10 39 40 Bit 12 25 26 23 24 Bit 20 41 42 7 8
Bit 5 11 12 37 38 Bit 13 27 28 21 22 Bit 21 43 44 5 6
Bit 6 13 14 35 36 Bit 14 29 30 19 20 Bit 22 45 46 3 4
Bit 7 15 16 33 34 Bit 15 31 32 17 18 Bit 23 47 48 1 2
2. Logic supply dc return is connected to all odd pins on the signal side.
3. Signal pin is pulled up to +Vcc when not asserted, down to dc return when asserted.
4. Power-side terminals are polarized for dc applications, and non-polarized for ac applications.
5. The backplane is shipped with a jumper configuration to supply the logic voltage through pin 49 of the edge connector.
SCHEMATIC DIAGRAM
356.9 (14.05)
166.7 (6.6)
mm (in)
344.1 (13.5)
6.4
(.25)
6.4
(.25)
45.7
(1.8)
88.9
(3.50)
76.2
(3.00)
MOUNTING DIMENSIONS
34567891011121314151617181920212223242526272829303132333435363738394041424344454647
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
1231245312453124531245312453124531245312453124531245312453124531245312453124531245312453124531245312453124531245312453124
Power Side Module Input/Output
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
Edge
Connector
Power Side Module Input/Output