Impulse R19L300-MRA1 User Manual
Features:
19"
19"
Marine Bridge System Display
Marine Bridge System DisplayMarine Bridge System Display
Model # R19L300-MRA1
Hyper Dimming
Sunlight Readable
Anti-Corrosion & IP Proof
Wide Voltage Range Input
Touchscreen/ Protection Glass
Multiscan Function
IP65 OSD Fornt Panel Design
Anti-Shock and Vibration
:
:
:
:
:
:
:
:
Mechanical Design Drawings
Front View
Dimming knob control backlight brightness from nearly 0% to 100%
Transflective film technology enhance visibility
IP65 aluminum housing with powder coating design (IP54 rear)
24 V DC to DC power input acceptable
(Isolation Resistance)
High quality touchscreen /AR protection glass for option
PIP(picture in picture) function and multi-video inputs
Ease of use front panel OSD control
Enhanced shock and vibration resistance
IP65 OSD
Front Panel
Touch/ Glass
Front Bezel
Side View
(Optional)
(Optional)
TypeApproved
Product
Wide Voltage RangePower Module
Inverter Board
Scaling Board
Panel
Modularized Construction
TouchController
Metal Frame
24V DC
Terminal Block
Rear View
TFT Characteristics:
Pixel Number
Pixel Pitch(RGB)
Contrast Ratio
Light Intensity
Viewable Angles
Active Display Area
Max Colors
:
1280 x 1024
:
0.294 (H) x 0.294 (V) mm
:
1000:1(typ.)
:
400 cd/m (typ.)
:
-85~85(H);-80~80(V)
:
376.32 (H) x 301.06(V) mm
:
16.7M (8bit/colors)
2
Input Signals:
RGB Signal
Composite Video
S-Video Signal
DVI-D Signal
DC Power Signal
AC Power Signal (Optional)
Touch Screen (Optional)
Remote via RS-232 (Optional)
Certification and Approvals : IEC 60945, DVN 2.4, IACS-E10
:
D-SUB 15P connector(female)
:
RCA phono plug
:
S-Video (SVHS) plug
:
DVI-D input 24pin connector
:
Screw terminal block
:
Std IEC Inlet
:
D-SUB 9P connector (female)
:
D-SUB 9P connector (female)
DNV Type Approval, CE, FCC
Note: All Specifications are subject to change without prior notice!
RS232 for
Remote Control
RS232
for Touch
Bottom View
DVI
Composite
GND
S-Video
VGA
Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
User Controls:
Power On/Off via front button
VR Brightness Knob Control
Power Mode Status LED
On Screen Display control(OSD)
OSD Remote Control via RS-232
Power Specifications:
Power Supply Options
Power Consumption
Mechanical and Environmental:
Mechanical Mounting
Operating Temperature
Operating Humidity
Anti-Vibration
Anti-Shock
*SAWtouchforIP54
Available Options:
Touch Screen Options
AR Safety Glass Options
Transflective Options
AC power Options
Bracket Mounting Options
Cutout
:
24 V DC power supply with Terminal block (Default, Isolation
Resistance)
:
45 W typical, normal operation
:
Panel (Flush) mount with IP65*, VESA, Bracket mounting
:
-10 to 55 deg.C (-20 to 60 deg.C for optional heating)
:
5% to 95% (non condensing)
:
5Hz~500Hz / 1Grms/3 Axis
:
15G, 11ms duraiton
:
SAW, 5 Wire Resistive
:
3mm Anti-reflective protection glass
:
Yes (Enhance Visibility)
:
(90 to 265 V AC power input)
Yes
:
Yes (One robust bracket can adjust from -10 to 30 deg.)
Revised Date : 03/27/2012
Marine Bridge System Display
19"
19"
Marine Bridge System DisplayMarine Bridge System Display
Mechanical Design with Robust Bracket (options)
Model # R19L300-MRA1
ROOF MOUNT
FRONT VIEW
BOTTOM VIEW
SIDE VIEW BACK VIEW
ROOF MOUNT
STAND ANGLE
STAND ANGLE
Note: this is a simplified drawing and some components are not marked in detail. Please contact our sales representative if you need further product information.
*
Certification and Approvals : IEC 60945, DVN 2.4, IACS-E10
DNV Type Approval, CE, FCC
Note: All Specifications are subject to change without prior notice! Revised Date : 03/27/2012
Rev.
1.0
1.1
1.2
Extra charge is required for back covers with bracket
*
holes for products purchased before end of Nov. 08'
All Dimensions are 0.5 mm
Add holesfor brackets on backcover
Spec change
Spec change
Reasons
Revised Date
*
Nov-17-08
Oct-08-09
Mar-02-11
Loading...