Impulse PS-SP-SS400 User Manual

Features:
Compatible with Intel ATX 12 V
80 Plus certified, high efficiency
High reliability forward converter circuit design
Environmental friendly “Super Low Noise” fan control
VOLTAGE TABLE
Model/ Type SP-SS400 AC Input 110 – 240 V ~7 A 50/60 Hz Active PFC DC Output +3.3 V +5 V +12 V1 +12 V2 -12 V +5 V SB Max Amps 20 A 20 A 17 A 17 A 0.8 A 2.5 A Max Combined 130 W max. 360 W 9.6 W 12.5 W Total Power 400 W
CABLE CONFIGURATION
Model/ Type SP-SS400
Qty. of cables Length M/B (20 + 4 P) 1 550 mm ATX12V (4 P) 1 550 mm EPS12V (8 P) 1 550 mm Molex (4 P)+ FDD (4 P) 3+1 300+120+120+120 mm Peripherals (4 P) 3 400+120+120 mm SATA (5 P) 2 400+100 mm SATA (5 P) 2 500+100 mm PCI-E (6 P) 1 570 mm PCI-E (6 P) 1 600 mm
LOGISTICAL DATA
EAR-Reg. no. EAR888-62976468 Item no. 12701 EAN Code 4250078130109 WEEE-Reg. no. DE88670488 Pieces/ carton 6 pieces Gross dimensions/ piece (W x H x D) 207 x 96 x 240 mm Net dimensions/ piece (W x H x D) 150 x 86 x 140mm Dimensions/ carton (W x H x D) 310 x 240 x 500 mm Net weight/ piece 1.95 kg Gross weight/ piece 2.65 kg Weight/ carton 17.00 kg Customs tariff no. 85044030
Safety
Country of origin PR China
Excellent thermal management with high quality ball bearing 12 cm fan
Active Power Factor Correction with high PF value of >0.98
Low power consumption in stand-by mode, meets Energy
Star 4.0 requirements
2× built-in PCI Express graphics card connectors, 2× 6 Pin
6× serial ATA hard disk connectors for your SATA drives
Stable output voltages under any load condition
Protection against over voltage, over power and short circuit
24 months warranty
CUL, TUV, CB, CCC, GOST-R, Ukraine, D, S, N, Fl, BSMI, C-tick, CE, FCC
MaxPoint Handelsges. mbH Kurt-Fischer-Str. 50 22926 Ahrensburg Germany Tel.: +49-4102/468 - 800 Fax.: +49-4102/468 – 801
info@MaxPoint.de www.MaxPoint.de WEEE-Reg.-Nr. DE88670488
Loading...