Impulse PCM-9363 User Manual

PCM-9363
Intel® Atom™ N455/D525 3.5" SBC, DDR3, 18/24-bit LVDS, VGA or HDMI, 2 GbE, Mini PCIe, 3 COM
NEW
Audio
GPIO
COM2
LPT
PS2 SMBus Internal
USB
VxWorks
HD & PWR LED
USB GbE1 GbE2 COM1 COM3 VGA
®
FANSATA
Power input
SATA Power
Inverter Power Output
18/24 bits LVDS HDMI
Features
 Embedded Intel® Atom™ N455 Single Core/ D525 Dual Core processor +
ICH8M, DDR3 memory support
 Intel Gen 3.5 DX9, MPEG2 Decode in HW, multiple display: 18/24-bit LVDS,
VGA or 1080P HDMI  Supports 12V input power for PCM-9363, easy for power integration  2 Intel GbE support, Rich I/O interface with 3COM, 2 SATA, 6 USB and GPIO  Supports embedded software APIs and Utilities
Software APIs:
Monitor
Utilities:
Monitoring
BIOS flash
Specifications
CPU
Front Side Bus 667 MHz for N455, 800 MHz for D525
Processor System
Memory
Display
Ethernet
Audio Chipset
WatchDog Timer Output System reset, Programmable counter from 1 ~ 255 minutes/ seconds
Storage
Rear I/O
Internal I/O
Expansion Mini PCI Express 1
Power
Environment
Physical Characteristics
Frequency 1.66 GHz on N455, 1.8 GHz on D525 L2 Cache 512 KB/1 MB System Chipset Intel N455/D525 + ICH8M BIOS AMI 16 Mbit Flash BIOS Technology DDR3 800 MHz Max. Capacity 4GB for D525, and 2GB for N455 Socket 1 x 204-pin SODIMM Chipset Intel Atom Processor N455 1.66GHz/D525 1.8GHz VRAM Optimized Shared Memory Architecture up to 224 MB system memory
Graphic Engine
LVDS LVDS: Single channel 18/24-bit LVDS up to WXGA 1366 x 768 VGA Intel Atom N455 Single Core up to 1400 x 1050 (SXGA), Intel Atom D525 Dual Core up to 2048 x 1536
HDMI
Dual Display VGA+LVDS Speed 10/100/1000 Mbps (Supports Wake on LAN) Controller GbE1 Intel 82567V, GbE2 Intel 82583V Connector RJ45 on GbE1, GbE2
Compact Flash Supports CompactFlach Card TYPE I/II (Primary Master IDE Channel) SATA 2 SATA II (Max. Data Transfer Rate 300 MB/s), 1 internal SATA power connector Serial 1 (COM1 supports RS-232) (ESD protection for RS-232: Air gap ±15kV, Contact ±8kV) Ethernet 2 (10/100/1000Mbps) VGA 1 HDMI 1 (only on PCM-9363DH) USB 2 USB 4 x USB 2.0
Serial
Parallel(LPT) 1 SMBUS 1 PS/2 KB/Mouse 1 GPIO 8-bit GPIO
Power Type AT Power Supply Voltage Support single 12V input, ± 10%
Power Consumption (Typical)
Power Consumption (Max, test in HCT) Power Management APM, ACPI Battery Lithium 3 V/210 mAH Operational 0 ~ 60° C (32 ~ 140° F) (Operational humidity: 40° C @ 95% RH Non-Condensing) Non-Operational -40° C ~ 85° C and 60° C @ 95% RH Non-Condensing Dimensions (L x W) 146 x 102 mm (5.7" x 4") Weight 0.85 kg (1.87 lb), weight of total package
Total Height
Intel Atom N455 Single Core 1.66 GHz Processor Intel Atom D525 Dual Core 1.8 GHz Processor
Intel Gen 3.5 DX9, MPEG2 Decode in HW Embedded Gen3.5+ GFX Core
Supported by request. Support 1080P and scale function (the HDMI resolution has to be set by Chrontel Utility in Windows XP/XP embedded) Supports Hot Plug Detection (HPD) for HDMI
Realtek ALC892 High Definition Audio (HD), Line-in, Line out, Mic-in
2 x COM (ESD protection for RS-232: Air gap ±15kV, Contact ±8kV) COM3 supports RS-232, COM2 supports RS-232/422/485 (Supports RS-485 auto flow control)
0.74 A @ 12 V (N455/ DDR3 1 GB)
0.86 A @ 12 V (D525/ DDR3 1 GB)
0.86 A @ 12 V (N455/ DDR3 1 GB)
1.18 A @ 12 V (D525/ DDR3 1 GB)
30.5mm for PCM-9363N
34.5mm for PCM-9363D/DH
WatchdogGPIO H/W
Brightness
eSOS Flash Lock Embedded
Backlight
On/Off
Security ID
SMBus CPU Speed System
Throttling
3.5" Single Board Computers
All product specifications are subject to change without notice Last updated : 29-Nov-2011
Board Diagram
Board Diagram
24 bit LVDS
HDMI
(PCM-9363DH only)
LVDS
HDMI
Transmitter
18 bit LVDS
Intel Atom
N455/ D525
(PCM-9363N/PCM-9363D only)
800 MHz
PCM-9363
VGA
DDR3 SODIMM x 1
8 bit GPIO
Ordering Information
Part No. CPU Memory
PCM-9363N-S6A1E
PCM-9363NL-S6A1E
PCM-9363D-S8A1E
PCM-9363DH-S8A1E
PCM-9363NZ-1GS6A1E
PCM-9363NZ21GS6A1E
Intel Atom N455
1.66 GHz Intel Atom N455
1.66 GHz Intel Atom D525
1.8 GHz Intel Atom D525
1.8 GHz Intel Atom N455
1.66 GHz Intel Atom N455
1.66 GHz
DDR3 SO-DIMM 512 KB 18/24-bit
DDR3 SO-DIMM 512 KB 18-bit
DDR3 SO-DIMM 1 MB 18/24-bit - Yes 1 1 Yes 2 1 6 2 8-bit 1 1 1 Active 0 ~ 60° C
DDR3 SO-DIMM 1 MB 18/24-bit 1 - 1 1 Ye s 2 1 6 2 8-bit 1 1 1 Active 0 ~ 60° C
1GB bundle 512 KB 18/24-bit
1GB bundle 512 KB 18/24-bit
HD Codec (ALC892) & Audio Connector
SATAII x 2
Comapct Flash
(Type-II)
BIOS
GPIO IC
SMBUS
PS2 KB&MS
Watchdog
L2
LVDS HDMI VGA GbE1 GbE2 Audio RS-232
Cache
By request By request
By request By request
HD
IDE
SPI
SMBus
Yes 1 1 Yes 2 1 6 2 8-bit 1 1 1 Passive 0 ~ 60° C
Yes 1 - Ye s 2 1 6 2 8-bit 1 1 1 Passive 0 ~ 60° C
Yes 1 1 Yes 2 1 6 2 8-bit 1 1 1 Passive -20 ~ 80° C
Yes 1 1 Yes 2 1 6 2 8-bit 1 1 1 Passive -40 ~ 85° C
DMI x 4 (Up to 1GB/S)
Intel ICH8M
LPC
Super I/O SCH3114
GLCI /PCIex1
LCI
PCIe
PCIe
USB 2.0
RS-232/ 422/485
INTEL 82567V
INTEL 82583V
(Shared with LPT)
COM1/3: RS-232
COM2: RS-232/422/485
USB
SATAII GPIO LPT CF
2.0
Mini PCIe
USB 2.0 x 6
LPTor FDD
mini PCIe
Thermal Solution
Operational Temp.
Packing List
Part No. Description Quantity
9689000002 mini Jumper pack 1700008941 SATA Cable w/lock 30 cm 1 1703060191 PS/2 cable 19 cm 1 1701140201 COM2 IDE D-SUB 20 cm cable 1 1703100121 USB 2 x 5P-2.0 12 cm W/BKT cable 2 1700018839 Audio Cable 20 cm 1 1700260250 LPT IDE 26P D-SUB 25 cm cable 1 1703150102 SATA 10 cm Power cable 1 1700100250 COM3 Cable IDE#2 10P-2.0/D-SUB 9P (M) 25 cm 1
1960050034N001
1960050035N001 CPU D525 cooler (75 x 62 x 24.4 mm) for PCM-9363D 1
1960024933S00B
PCM-9363 SBC Startup Manual Utility CD
CPU N455 heatsink (75 x 62 x 19.9 mm) for PCM-9363N series
ICH8M Heatsink for PCM-9363 series (38.1 x 33.6 x 7.5 mm)
1
1
Rear I/O View
PCM-9363N-S6A1E
PCM-9363D-S8A1E PCM-9363NZ-1GS6A1E PCM-9363NZ21GS6A1E
PCM-9363DH-S8A1E
Optional Accessories
Part No. Description
1960047470N001 Heat spreader (97 x 75 x 18.5 mm)
1700018785
Embedded OS/API
Embedded OS/API Part No. Description
Win XPE
WinCE 2070010331
WES7 2070009835 Image WES7E Intel Lunar V5.0 ENG QNX V6.5 Vxwork V6.8 Linux Ubuntu V10.04 Software API
Online Download
Internal SATA power cable 35cm (power source is from PCM-9363)
2070010314 XPE WES2009 PCM-9363 V4.0 24MUI 2070010313 XPE WES2009 PCM-9363 V4.0 ENG
CE 6.0 R3 Pro PCM-9363 V6.0.0 ENG (3COM)
www.advantech.com/products
Value-Added Software Services
Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms. It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications.
Software APIs
Control Monitor
General Purpose Input/Output is a flexible parallel interface that allows a variety of custom connections. It allows users to monitor the level of signal input or set the output status to switch on/off a device. Our API also provides Programmable
GPIO
SMBus
I2C
GPIO, which allows developers to dynamically set the GPIO input or output status.
SMBus is the System Management Bus defined by Intel® Corporation in 1995. It is used in personal computers and servers for low-speed system management communications. The SMBus API allows a developer to interface a embedded system environment and transfer serial messages using the SMBus protocols, allowing multiple simultaneous device control.
I2C is a bi-directional two wire bus that was developed by Philips for use in their televisions in the 1980s. The I2C API allows a developer to interface with an embedded system environment and transfer serial messages using the I2C protocols, allowing multiple simultaneous device control.
Watchdog
Hardware
Monitor
Hardware
Control
Display Power Saving
The Brightness Control API allows a developer to interface with an embedded device to easily control brightness.
Brightness
Control
CPU Speed
A watchdog timer (WDT) is a device that performs a specific operation after a certain period of time if something goes wrong and the system does not recover on its own. A watchdog timer can be programmed to perform a warm boot (restarting the system) after a certain number of seconds.
The Hardware Monitor (HWM) API is a system health supervision API that inspects certain condition indexes, such as fan speed, temperature and voltage.
The Hardware Control API allows developers to set the PWM (Pulse Width Modulation) value to adjust fan speed or other devices; it can also be used to adjust the LCD brightness.
Make use of Intel SpeedStep technology to reduce power power consumption. The system will automatically adjust the CPU Speed depending on system loading.
Refers to a series of methods for reducing power consumption in computers by lowering the clock frequency. These APIs allow the user to lower the clock from 87.5% to 12.5%.
Backlight
The Backlight API allows a developer to control the backlight (screen) on/off in an embedded device.
System
Throttling
Software Utilities
The BIOS Flash utility allows customers to update the flash ROM BIOS version, or use it to back up current BIOS by copying it from the flash chip to a file on customers’ disk. The BIOS Flash utility also provides a command line version and
BIOS Flash
Embedded Security ID
Monitoring
All product specifications are subject to change without notice Last updated : 29-Nov-2011
API for fast implementation into customized applications.
The embedded application is the most important property of a system integrator. It contains valuable intellectual property, design knowledge and innovation, but it is easily copied! The Embedded Security ID utility provides reliable security functions for customers to secure their application data within embedded BIOS.
The Monitoring utility allows the customer to monitor system health, including voltage, CPU and system temperature and fan speed. These items are important to a device; if critical errors happen and are not solved immediately, permanent damage may be caused.
eSOS
Flash Lock
The eSOS is a small OS stored in BIOS ROM. It will boot up in case of a main OS crash. It will diagnose the hardware status, and then send an e-mail to a designated administrator. The eSOS also provides remote connection: Telnet server and FTP server, allowing the administrator to rescue the system.
Flash Lock is a mechanism that binds the board and CF card (SQFlash) together. The user can “Lock” SQFlash via the Flash Lock function and “Unlock” it via BIOS while booting. A locked SQFlash cannot be read by any card reader or boot from other platforms without a BIOS with the “Unlock” feature.
Loading...