Impulse MMD-5201M User Manual
MMD-5201M
51cm(20.1”) Diagnostic Grayscale Monitor
20.1” grayscale TFT LCD
5MP-2560(H) x 2048(V)
Max. luminance: 850cd/m²
Max. calibrated luminance: 600cd/m²
600:1 exceptional contrast ratio
Out-of-box DICOM compliant
Intelligent display mode auto adjustment with graphic card auto detection
GrayBoost® 12-bit to 12-bit LUT provides simultaneously 4,096 tones of gray
Ready for Deep color and HDMI™ 1.3 with GrayEasy® technology for 12-bit
grayscale displaying
5MP
12
-bit
GrayBoost® 12-bit Simultaneous Grayscale
12-bit (4096 tones) image input can be all retained in 12-bit (4096 tones)
image output via built-in 12-bit LUT. The GrayBoost® technology
successfully produces 12-bit image data ow through commercial dual-
link graphic card, lowering total cost of ownership.
12-bit 8-bit
GrayEasy® HDMITM 1.3 Grayscale Support
The GrayEasy® technology successfully produces a HDMITM 1.3
compatible, 12-bit grayscale display system without any additional
upgrade cost. The built-in 12-bit to 12-bit Look-Up-Table (LUT) for
DICOM calibration ensures the quality of grayscale images.
Backlight Stabilizer
The GeniGUARD® built-in backlight stabilizer integrated in
PACSmate® monitors automatically calibrates the shift of LCD brightness
caused by startup drift, ambient temperature and backlight aging.
Uniform Luminance
Uniform luminance is especially critical for diagnostic applications and
PACSmate sets a high standard for the uniformity of every medical monitor.
PACSmate's special testing equipment ensures every customer gets the
medical monitors with best uniformity for precise diagnostic results.
Original
Display Mode Auto-Detection
PACSmate medical monitors have built-in auto-detection technology
which identies different graphic cards automatically and self adjusts the
mode t with the specic graphic card.
Smart Thermal Control system
PACSmate 5MP monochrome displays featuring the smart thermal control
system, automatically protect the display from overheating to extend the
LCD life. The PACSmate series monitors are also equipped with smart
alert system to keep users informed when abnormal operations of the
monitor are detected.
Factory Calibration
Meets AAPM TG18 & DIN
6868-57 standards
GeniGUARD® Backlight Stabilizer
Customer Assurance
PACSmate series are applied to the following safety standards, including
UL 60601-1, CE (EN 60601-1-2), FCC Part 18, TÜV GM, VCCI, BSMI
and CCC.
Smart Software OSD
The smartOSD is an intelligent and easy to use proprietary On-Screen
Display (OSD) software especially designed for the PACSmate display
monitors. It delivers excellent performance and exibility over hardware
OSD solutions in the monitor unit. Users can adjust the monitor with the
smartOSD in a Windows® environment from the remote system instead of
adjustment from front panel.
The smartOSD allows some functions as below :
• Power on/off • Luminance selection
• Graphic card mode selection • GrayBoost® on/off
• DICOM Look-Up-Table selection • Monitor Information
Ergonomic Design
Narrow bezels enable seamless side-by-side viewing for diagnostic
applications.
GeniSPOT® & GeniPASS® QC Solution
Packed in every PACSmate monitor, the GeniSPOT® 3-in-1 calibration
system and GeniPASS® QC utility ensures the display conforms with AAPM,
DIN, JIS and IEC standards all the time.
Functions:
• Luminance testing
• DICOM calibration
• Luminance auto-dimming
• GeniSPOT® self-diagnosis
• Five-point testing of uniformity
GeniSPOT®DICOM
Calibration
Dimensions
Packing List
PACSmate® Series medical LCD monitor
Monitor stand
Power Cord (US x 1, EU x 1)
Power Adapter
Dual-link DVI-D Signal Cable
USB Cable
GeniSPOT® USB Calibrator
Utility CD-ROM
(for user's manual, software utility, and GeniPASS® QC software)
Ordering information
Part No. Description
MMD-5201M
5MP
5 megapixel, 20.1" monochrome LCD monitor
in cl ud es Ge ni SP OT ® an d Gen iPA S S®
calibration kit
Pairing Monitors
PACSmate provides a pair matching service for dual-head display
applications, allowing image comparison for diagnostic practices.
Specications
PACSmate® Model MMD-5201M
Drive System a-Si TFT active matrix
Display area (H x V) 399.4mm x 319.5 mm
Diagonal size of display 51cm (20.1 inches)
Resolution (H x V) 2560 x 2048
Pixel pitch (H x V) 0.156mm x 0.156 mm
Sub-pixel pitch (H x V) 0.052mmx 0.156 mm
Pixel format 1 pixel consists of 3 sub-pixels, LCR vertical stripe
Luminace-max. 850cd/m
Max. luminance
(calibrated)
White chromaticity Wx, Wy=(0.280, 0.304) (typical)
Contrast ratio 600:1 (typical)
Viewing angle Right 85°, Left 85°, Up 85°, Down 85° (10:1 contrast)
Response time
(Ton + Toff)
Polarizer surface/ hardness Antiglare/ 2H
Backlight 12 CCFL
Default gamma DICOM
Grayscale Simultaneous 12-bit
LUT 12-bit input to 12-bit output
Signal input Dual link DVI-D (digital)
USB 2.0 hub 1 upstream/ 2 downstream
Membrane keypad Yes
Power adapter
Input voltage range
Power adapter
Input frequency range
Power adapter
Input AC current
Power adapter
Power output
Physical dimensions
(H x W x D)
Adjustable height range
(with stand)
Weight (with stand) 13kg
Operating temperature 10°C~35°C
Storage temperature 0°C~45°C
Operation relative humidity 30% ~75% Non-condensing
Storage/ Transportation
Relative humidity
2
2
600cd/m
30ms (typical)
100VAC - 240VAC
47Hz-63Hz
1.25A-0.5A
12VDC, 8.33A, 100W (max)
With stand: 520mm x 380mm x 274mm (portrait)
Without stand: 485mm x 380mm x 100mm (portrait)
Portrait: 520mm~590 mm
Landscape: 465mm~535 mm
10% ~95% Non-condensing
Loading...