Impulse MMD-4300C User Manual

Single 4MP viewing mode &

Dual 2MP viewing mode

vailable

4MP

-bit

MMD-4300C

30”, 4MP diagnostic color display

30” color TFT LCD

4MP-2560(H) x 1600(V)

Max. luminance: 370cd/m²

Max. calibrated luminance: 250cd/m²

Built-in front sensor for conformance testing and auto-dimming function

Selectable Gamma 1.8,2.0,2.2 and DICOM calibration

Single 4MP and dual 2MP viewing setups

Intelligent display mode auto adjustment with graphic card auto detection

Ready for Deep color and HDMI™ 1.3 with GrayEasy® technology

and 30-bit color dithering

Intelligent color-to-gray conversion for grayscale applications

IPXX / IPX2 compliance

100% Compatible With VESA DDC/CI Protocol

MMD-4300C is implemented with the VESA DDC/CI protocol and the standard VESA Monitor Control Command Set (MCCS), the universal communication interface, enabling remote control management through network. MMD-4300C allows easier two-way communications with the host PC through only DVI cable, instead of additional serial or USB cables. Through DDC/CI protocol, the software OSD manages the MMD-4300C remotely. PACSmate also provides

software OSD customization services with command library and customer dened MSSC command programming.

Various software OSD functions:

• Power on/off • Luminance selection

• Display mode selection: 4MP/2MP, color/monochrome • DICOM/ Gamma Look-Up-Table selection

• Gamma and color temperature selection • Monitor information

Multiple Viewing Modes & Color to Grayscale Technology

Single Viewing Mode

In single viewing mode, the MMD-4300C is displayed as a single 4MP monitor, either in color or in grayscale mode.

Single 4MP in color mode

Dual-link DVI-D 2560 x 1600

Single 4MP in grayscale mode

Dual-link DVI-D 2560 x 1600

Dual Viewing Mode

Through two DVI signal inputs, the MMD-4300C can be congured to display

in a dual 2MP viewing mode. With color-to-grayscale conversion technology, the MMD-4300C can be viewed in multiple modes for side-by-side image comparison purpose. The independent Look-Up-Table for DICOM and Gamma calibration ensures the best display quality for diagnostic applications. The real-

time adjustment of multiple display modes can be simply achieved through

SmartOSD software utility.

Dual portrait 2MP color mode Dual portrait 2MP grayscale mode

GrayEasy® 30-bit Deep Color

30-bit color image (10-bit for each RGB element) can be displayed on PACSmate monitors without any image loss. Through PACSmate’s unique GrayEasy® technology, there’s no need to replace the monitors for future HDMI 1.3 supported deep color display capabilities.

Customer Assurance

PACSmate series are applied to the following safety standards, including UL 60601-1, CE (EN 60601-1-2), FCC Part 18, TÜV GM, VCCI, BSMI and CCC.

Single/ Dual-link DVI-D 1280 x 1600

Dual portrait 2MP grayscale/color mode Dual portrait 2MP color/grayscale mode

Single/ Dual-link DVI-D 1280 x 1600

Single-link DVI-D 1280 x 1600

Single/ Dual-link DVI-D 1280 x 1600

Single-link DVI-D 1280 x 1600

User Selectable Gamma Settings and Color Temperature Settings

PACSmate provides you with exible Gamma settings and color temperature

settings for side-by-side image comparison in dual-viewing modes. The independent Gamma settings (for Gamma 1.8,2.0,2.2) and color temperature settings (6500K, 9300K) consist of multiple user-selectable settings,

providing exible display modes for images from different modalities.

Auto-Dimming for Ambient Light Adjustment

The auto-dimming function helps create better diagnostic experience under proper light condition and extend backlight lifetime

Well-Lit Room Dim-Lit Room

DICOM

Gamma 2.2 Gamma 2.0 Gamma 1.8

Color Temperature Settings

IPX2 Compliance

The whole enclosure of MMD-4300C is compliant with IPX2 waterproof standard.The MMD-4300C can be used in the operating room where is humid and waterproof is considered important.

Dimensions

Packing List

PACSmate® Series medical LCD monitor

Monitor stand

Power Cord (US x 1, EU x 1)

Power Adapter

Dual-link DVI-D Signal Cable

USB Cable

Utility CD-ROM (for user's manual and software utility)

Ordering information

Part No. Description

MMD-4300C

4MP

MMD-4300CX

4MP

4 megapixel, 30" color LCD monitor with IPX2 housing

4 megapixel, 30" color LCD monitor with IPXX housing

Built-in Front Sensor for DICOM Conformance Testing

PACSmate has designed a built-in, front-mounted sensor which continually

adjusts the luminance output to ensure consistent images over time.

Built-in Front Sensor

Specications

PACSmate® MMD-4300C

Drive System a-Si TFT active matrix

Display area (H x V) 641.3mm x 400.8 mm

Diagonal size of display 75.6cm (30.0 inches)

Resolution (H x V) 2560 x 1600

Pixel pitch (H x V) 0.2505mm x 0.2505 mm

Sub-pixel pitch (H x V) 0.0835mm x 0.2505 mm

Pixel format RGB (Red dot, Green dot, Blue dot) vertical stripe

Luminace-max. 370cd/m

Max. Luminance (calibrated) 250cd/m

Contrast ratio 1000:1 (typical)

Viewing angle Right: 178°, Left: 178°, Up: 178° , Down: 178°

Response time (Ton + Toff) 12ms (typical)

Polarizer surface/ hardness Antiglare/ 3H

Backlight 16 CCFL

Default gamma Gamma 2.2

LUT 10-bit for each RGB

Signal input

USB 2.0 hub 1 upstream/ 2 downstream

Membrane keypad Yes

Power adapter Input voltage range

Power adapter Input frequency range

Power adapter Input AC current

Power adapter Power output

Physical dimensions (H x W x D)

Weight 15kg

Operating temperature 10°C~35°C

Storage temperature 0°C~45°C

Operation relative humidity 30% ~75% Non-condensing

Storage/ Transportation Relative humidity

Master: Dual link DVI-D (digital) Slave: Single link DVI-D (digital)

100VAC-240VAC

47Hz-63Hz

2.0A max. at 90VAC

24VDC, 6.25A, 150W (max)

With stand: 522mmx 736mm x 266 mm (landscape) Without stand: 480mm x 736mm x 76 mm (landscape)

10% ~95% Non-condensing