Impulse MMD-3213M User Manual

3MP

MMD-3213M

54cm(21.3”) Diagnostic Grayscale Monitor

21.3” grayscale TFT LCD

3MP-2048(H) x 1536(V)

Max. luminace: 800cd/m²

Max. calibrated luminance: 600cd/m²

700:1 exceptional contrast ratio

Out-of-box DICOM compliant

Intelligent display mode auto adjustment with graphic card auto detection

GrayBoost® 12-bit to 12-bit LUT provides simultaneously 4,096 tones of gray

Ready for Deep color and HDMI™ 1.3 with GrayEasy® technology for 12-bit grayscale displaying

12

-bit

GrayBoost® 12-bit Simultaneous Grayscale

12-bit (4096 tones) image input can be all retained in 12-bit (4096 tones)
image output via built-in 12-bit LUT. The IEI GrayBoost® technology

successfully produces 12-bit image data ow through commercial dual-

link graphic card, lowering total cost of ownership.

12-bit 8-bit

Backlight Stabilizer

The GeniGUARD® built-in backlight stabilizer integrated in
PACSmate™ monitors automatically calibrates the shift of LCD brightness
caused by startup drift, ambient temperature and backlight aging.

Uniform Luminance

Uniform luminance is especially critical for diagnostic applications and
IEI sets a high standard for the uniformity of every medical monitor.
IEI's special testing equipment ensures every customer gets the medical
monitors with best uniformity for precise diagnostic results.

Original

GrayEasy® HDMITM 1.3 Grayscale Support

The GrayEasy® technology successfully produces a HDMITM 1.3
compatible, 12-bit grayscale display system without any additional
upgrade cost. The built-in 12-bit to 12-bit Look-Up-Table (LUT) for
DICOM calibration ensures the quality of grayscale images.

IEI Factory Calibration

Meets AAPM TG18 & DIN
6868-57 standards

GeniGUARD® Backlight Stabilizer

Display Mode Auto-Detection

IEI's PACSmate™ medical monitors have built-in auto-detection

technology which identies different graphic cards automatically and self
adjusts the mode t with the specic graphic card.

Smart Software OSD

The smartOSD is an intelligent and easy to use proprietary On-Screen
Display (OSD) software especially designed for the IEI display monitors.

It delivers excellent performance and exibility over hardware OSD

solutions in the monitor unit. Users can adjust the monitor with the
smartOSD in a Windows® environment from the remote system instead of
adjustment from front panel.
The smartOSD allows some functions as below :

• Power on/off • Luminance selection

• Graphic card mode selection • GrayBoost® on/off

• DICOM Look-Up-Table selection • Monitor Information

Ergonomic Design

Narrow bezels enable seamless side-by-side viewing for diagnostic
applications.

GeniSPOT® & GeniPASS® QC Solution

Packed in every IEI PACSmate™ monitor, the GeniSPOT® 3-in-1 calibration
system and GeniPASS® QC Utility ensures the display conforms with AAPM,
DIN, JIS and IEC standards all the time.
Functions:

• Luminance testing

• DICOM calibration

• Luminance auto-dimming

• GeniSPOT® self-diagnosis

• Five-point testing of uniformity

GeniSPOT®DICOM

Calibration

Graphic Card Compatibility

nVIDIA QUADRO FX560/FX1500
nVidia GeForce 8600GT

RealVision SMD PCI-X series
RealVision SMD ADV series

Matrox MED series

ATI V7100/V3400

Packing List

PACSmate™ Series medical LCD monitor

Monitor stand

Power Cord (US x 1, EU x 1)

Power Adapter

Dual-link DVI-D Signal Cable

USB Cable

GeniSPOT® USB Calibrator

Utility CD-ROM
(for user's manual, software utility, and GeniPASS® QC software)

Ordering information

Part No. Description

MMD-3213M

3MP

3 megapix el, 21.3" m onochro me LCD
mo ni tor inc lu de s Ge niS PO T® a nd
GeniPASS® calibration kit

Pairing Monitors

IEI provides a pair matching service for dual-head display applications,
allowing image comparison for diagnostic practices.

Specications

PACSmate® Model MMD-3213M

Drive System a-Si TFT active matrix

Display area (H x V) 433.2mm x 324.9 mm

Diagonal size of display 54cm (21.3 inches)

Resolution (H x V) 2048 x 1536

Pixel pitch (H x V) 0.2115mm x 0.2115 mm

Sub-pixel pitch (H x V) 0.0705mmx 0.2115 mm

Pixel format 1 pixel consists of 3 sub-pixels, LCR vertical stripe

Luminace-max. 800cd/m

Max. luminance (calibrated) 600cd/m

White chromaticity Wx, Wy=(0.280, 0.304) (typical)

Contrast ratio 700:1 (typical)

Viewing angle Right 85°, Left 85°, Up 85°, Down 85° (10:1 contrast)

Response time (Ton + Toff) 35ms (typical)

Polarizer surface/ hardness Antiglare/ 2H

Backlight 6 CCFL

Default gamma DICOM

Grayscale Simultaneous 12-bit

LUT 12-bit

Signal input Dual link DVI-D (digital)

USB 2.0 hub 1 upstream/ 2 downstream

Membrane keypad Yes

Power adapter Input voltage range 100VAC - 240VAC

Power adapter Input frequency
range

Power adapter Input AC current 1.25A-0.5A

Power adapter Power output 12VDC, 8.33A, 100W (max)

Physical dimensions (H x W x D)

Adjustable height range (with
stand)

Operating temperature 10°C~40°C

Storage temperature -20°C~60°C

Operation relative humidity 30% ~75% Non-condensing

Storage/ Transportation
Relative humidity

2

2

47Hz-63Hz

With stand: 520mm x 380mm x 274 mm (portrait)
Without stand: 485mm x 380mm x 100 mm (portrait)

Portrait: 520mm~590 mm
Landscape: 465mm~535 mm

10% ~95% Non-condensing

Headquarters

IEI Technology Corp.

TEL : [phone] FAX : [phone]
[e-mail] www.pacsmate.com
No. 29, Jhongsing Rd.,Sijhih City,Taipei County, 221, Taiwan

America-United States

IEI Technology USA Corp.

TEL : [phone] Fax: [phone]
[e-mail] www.pacsmate.com
168 University Parkway, Pomona, CA 91768

China

IEI Technology (Shanghai) Co.,Ltd.

TEL : [phone] FAX : [phone]
[e-mail] www.pacsmate.com
3F No. 1728 Yi-Shan Road, Min-Hang, ShangHai, China