Impulse MMD-2213M User Manual

MMD-2213M

54cm(21.3”) Diagnostic Grayscale Monitor

21.3” grayscale TFT LCD

2MP-1600(H) x 1200(V)

Max. luminance: 1000cd/m²

Max. calibrated luminance: 600cd/m²

700:1 exceptional contrast ratio

Out-of-box DICOM compliant

Intelligent display mode auto adjustment with graphic card auto detection

GrayBoost® 12-bit to 12-bit LUT provides simultaneously 4,096 tones of gray

Ready for Deep color and HDMI™ 1.3 with GrayEasy® technology for 12-bit

grayscale displaying

2MP

12

-bit

GrayBoost® 12-bit Simultaneous Grayscale

12-bit (4096 tones) image input can be all retained in 12-bit (4096
tones) image output via built-in 12-bit LUT. The GrayBoost®

technology successfully produces 12-bit image data ow through

commercial dual-link graphic card, lowering total cost of ownership.

12-bit 8-bit

Backlight Stabilizer

The GeniGUARD® built-in backlight stabilizer integrated in
PACSmate® monitors automatically calibrates the shift of LCD
brightness caused by startup drift, ambient temperature and
backlight aging.

Uniform Luminance

Uniform luminance is especially critical for diagnostic applications and
PACSmate sets a high standard for the uniformity of every medical monitor.
PACSmate 's special testing equipment ensures every customer gets the
medical monitors with best uniformity for precise diagnostic results.

Original

GrayEasy® HDMITM 1.3 Grayscale Support

The GrayEasy® technology successfully produces a HDMITM 1.3
compatible, 12-bit grayscale display system without any additional
upgrade cost. The built-in 12-bit to 12-bit Look-Up-Table (LUT) for
DICOM calibration ensures the quality of grayscale images.

Display Mode Auto-Detection

PACSmate medical monitors have built-in auto-detection technology

which identies different graphic cards automatically and self adjusts the
mode t with the specic graphic card.

Factory Calibration

Meets AAPM TG18 & DIN
6868-57 standards

GeniGUARD® Backlight Stabilizer

Customer Assurance

PACSmate series are applied to the following safety standards, including
UL 60601-1, CE (EN 60601-1-2), FCC Part 18, TÜV GM, VCCI, BSMI
and CCC.

Smart Software OSD

The smartOSD is an intelligent and easy to use proprietary On-Screen
Display (OSD) software especially designed for the PACSmate display

monitors. It delivers excellent performance and exibility over hardware
OSD solutions in the monitor unit. Users can adjust the monitor with the

smartOSD in a Windows® environment from the remote system instead of

adjustment from front panel.

The smartOSD allows some functions as below :

• Power on/off • Luminance selection

• Graphic card mode selection • GrayBoost® on/off

• DICOM Look-Up-Table selection • Monitor Information

Ergonomic Design

Narrow bezels enable seamless side-by-side viewing for diagnostic
applications.

GeniSPOT® & GeniPASS® QC Solution

Packed in every PACSmate monitor, the GeniSPOT® 3-in-1 calibration
system and GeniPASS® QC utility ensures the display conforms with AAPM,
DIN, JIS and IEC standards all the time.
Functions:

• Luminance testing

• DICOM calibration

• Luminance auto-dimming

• GeniSPOT® self-diagnosis

• Five-point testing of uniformity

GeniSPOT®DICOM

Calibration

Dimensions

Packing List

PACSmate® Series medical LCD monitor

Monitor stand

Power Cord (US x 1, EU x 1)

Power Adapter

Dual-link DVI-D Signal Cable

USB Cable

GeniSPOT® USB Calibrator

Utility CD-ROM
(for user's manual, software utility, and GeniPASS® QC software)

Ordering information

Part No. Description

MMD-2213M

2MP

2 megapix el, 21.3" m onochro me LCD
mo ni tor inc lu de s Ge niS PO T® a nd
GeniPASS® calibration kit

Pairing Monitors

PACSmate provides a pair matching service for dual-head display
applications, allowing image comparison for diagnostic practices.

Specications

PACSmate® Model MMD-2213M

Drive System a-Si TFT active matrix

Display area (H x V) 433.2mm x 324.9 mm

Diagonal size of display 54cm (21.3 inches)

Resolution (H x V) 1600 x 1200

Pixel pitch (H x V) 0.270mm x 0.270 mm

Sub-pixel pitch (H x V) 0.090mm x 0.270 mm

Pixel format 1 pixel consists of 3 sub-pixels, LCR vertical stripe

Luminace-max. 1000cd/m

Max. luminance (calibrated) 600cd/m

White chromaticity Wx, Wy=(0.280, 0.304) (typical)

Contrast ratio 700:1 (typical)

Viewing angle Right 85°, Left 85°, Up 85°, Down 85° (10:1 contrast)

Response time (Ton + Toff) 35ms (typical)

Polarizer surface/ hardness Antiglare/ 2H

Backlight 6 CCFL

Default gamma DICOM

Grayscale Simultaneous 12-bit

LUT 12-bit

Signal input Single link DVI-D (digital)

USB 2.0 hub 1 upstream/ 2 downstream

Membrane keypad Yes

Power adapter Input voltage range 100VAC - 240VAC

Power adapter Input frequency
range

Power adapter Input AC current 1.25A-0.5A

Power adapter Power output 12VDC, 8.33A, 100W (max)

Physical dimensions (H x W x D)

Adjustable height range (with
stand)

Weight (with stand) 13.2kg

Operating temperature 10°C~35°C

Storage temperature 0°C~45°C

Operation relative humidity 30% ~75% Non-condensing

Storage/ Transportation
Relative humidity

47Hz-63Hz

With stand: 520mm x 380mm x 274 mm (portrait)
Without stand: 485mm x 380mm x 100 mm (portrait)

Portrait: 520mm~590 mm
Landscape: 465mm~535 mm

10% ~95% Non-condensing

2

2