Impulse MD-119 User Manual

Marine Displays and Computers
OSD Control Buttons
MD-119 Series
19-inch type approved ECDIS marine display, 1280 x 1024 resolution
› 19-inch screen, 5:4 aspect ratio, 1280 x 1024 resolution › LED backlighting › Full range dimming, optional optical bonding › Touch screen models available › Dual-power supply (AC 110V-230V, DC 24V) › Picture-in-Picture and Picture-by-Picture display › ECDIS color calibration (optional)
Overview
The MD-119 further comes with PIP (picture-in-picture) and
Appearance
PBP (picture-by-picture) functions, allowing for multiple display configurations that may be tailored to a variety of situations. Finally, with both AC and DC power inputs, the MD-119 may be conveniently installed on any bridge, without the need for extra hardware.
Moxa’s marine displays are compliant with the most important industrial marine standards, such as IEC 60945, DNV, and IACS-E10, giving strong assurance of their suitability for marine applications.
RS-232/422/485 Port x 2 (1 reserved)
Ground Connector
1
USB Host (optional)
Buzzer Connector
DVI-I Input x 2
VGA Output
BNC Composite x 3
DC Power Input
AC Power Input/Output
www.moxa.com
info@moxa.com
Marine Displays and Computers
Dimensions
483 (19.02)
Specifications
Display
Panel Size: 19” Aspect Ratio: 5:4 Pixels: 1280 x 1024 Pixel Pitch (RGB): 0.294 (H) x 0.294 (V) mm Response Time: 5 ms (gray to gray) Contrast Ratio: 1000:1 Light Intensity: 350 cd/mxm Viewing Angles: 85° x 80° (right-left/up-down) Active Display Area: 376.32 (H) x 301.06 (V) mm / 14.81 (H) x 11.85
(V) in
Max Colors: 16.7M (8 bit) Display Interface: VGA output x 1, DVI-I input x 2, BNC composite x 3 Resolution:
• VGA: 640 x 480
• SVGA: 800 x 600
• XGA: 1024 x 768
• SXGA: 1280 x 1024
Serial Interface
Serial Standards: 1 software-selectable RS-232/422/485 ports (DB9,
male), 1 mfr reserved for flashing firmware
Serial Communication Parameters
Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: XON/XOFF, ADDC® (automatic data direction control)
for RS-485
Baudrate: 9600 Kbps
Serial Signals
RS-232: TxD, RxD, DTR, DSR, DCD, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w: Data+, Data-, GND
Front Panel
LEDs: Storage, Power OSD: 5 x OSD control USB: 1 USB 2.0 host for touch screen function (optional)
Unit: mm (inch)
444 (17.48)
82 (3.23)
Physical Characteristics
Housing: Aluminum sheet metal Weight: 9.7 kg Dimensions: 82 x 483 x 444 mm (3.23 x 19.02 x 17.48 in) Mounting: Flush mounting
Environmental Limits
Operating Temperature: -15 to 55°C (5 to 131°F) Storage Temperature: -20 to 60°C (-4 to 140°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Anti-Vibration:
• IEC 60945
• DNV 2.4, Class A/Class C
Power Requirements
Input Voltage:
• 24 VDC (with tolerance from 18 to 36 VDC, 2-pin terminal block)
• 115 to 230 VAC, 50/60 Hz
Power Consumption: 42 W
• 1.75 A @ 24 VDC
• 0.38 A @ 110 VAC
Standards and Certifications
Safety: UL/cUL, CCC (pending) EMC: EN 55022 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4,
FCC Part 15 Subpart B Class A
Marine: IEC 60945 4th (pending), DNV (pending), IACS-E10 (pending) Green Product: RoHS, cRoHS, WEEE
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer) supporting
1-255 levels for time interval system reset, software programmable
MTBF (mean time between failures): 39,675 hrs
Warranty
Warranty Period: 1 year Details: See www.moxa.com/warranty
2
www.moxa.com
info@moxa.com
Marine Displays and Computers
We recommend taking the following precautions to minimize heat
build-up within the display:
Position the display within ±40° of the vertical.
Install an external fan to increase airflow upwards through the
display if (a) the display is not positioned within ±40° of the vertical, (b) the operating temperature exceeds 25°C, or (c) the display is used in a location with minimal ventilation.
Important Safety Precaution:
Even though the display is rated to operate within the IEC 60945 standard of -15 to 55°C for bridge applications, it is best to ensure that the operating temperature does not exceed 25°C. Doing so will
increase the life of your display and minimize service costs.
Ordering Information
Available Models
MD-119-X1: 19-inch type approved ECDIS marine display with 5:4 aspect ratio, 1280 x 1024 resolution, LED
backlighting, tape bonding, and dual AC/DC power supplies
Package Checklist
• MD-119-X1 display
DVI to VGA adapter
VGA Cable
DVI-D Cable
Console Mounting Kits
DC terminal block (for powering
device)
DC terminal block (for powering the buzzer)
Documentation and driver DVD
Quick installation guide (printed)
Warranty card
3
© Moxa Inc. All Rights Reserved. Updated Jun. 14, 2013. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Loading...