Page 1
IT6015B INCLINE BENCH
Assembly Instructions
Page 2
Table of contents
Important Safety Instructions----------------------------------- 1
Exploded View Diagram------------------------------------------- 2
Assembly Part List-------------------------------------------------- 3
Hardware List--------------------------------------------------------- 4
Parts List--------------------------------------------------------------- 5
Assembly instructions--------------------------------------------- 6
Page 3
1
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete
physical examination from your physician. When using exercise
equipment, basic precautions should always be taken, including the
following:
* Read all instructions before using the INCLINE BENCH. These
instructions are written to ensure your safety and to protect the unit.
* Do not allow children on or near the equipment.
* Use the equipment only for its intended purpose as described in this
guide. Do not use accessory attachments that are not recommended
by the manufacturer: such attachments might cause injuries.
* Wear proper exercise clothing and shoes for your workout----no loose
clothing.
* Be careful when getting on or off the equipment.
* Do not overexert yourself or work to exhaustion.
* If you feel any pain or abnormal symptoms, stop your workout
immediately and consult your physician.
* Never operate the unit when it has been dropped or damaged.
* Never drop or insert anything into any opening in the equipment.
* Always check the unit and its cables before each use. Make sure that
all fasteners and cables are secure and in good working condition.
* Frayed or worn cables can be dangerous and may cause injury.
Periodically check these cables for any indication of wear.
* Keep hands, limbs, loose clothing and long hair well out of the way of
moving parts.
* Do not attempt to lift more weight than you can control safely.
* Do not use the equipment outdoors.
* Read each step in the assembly instructions and follow the steps in
sequence. Do not skip ahead. If you skip ahead, you may learn later
that you have to disassemble compontents and that you may have
damaged the equipment.
* Assemble and operate the equipment on a solid, level surface. Locate
the unit a few feet from walls or furniture to provide easy access. The
is designed for your enjoyment. By following these
precautions and using common sense, you will have many safe and
pleasurable hours of healthfull exercise with the equipment.
Personal Safety During Assembly
INCLINE BENCH
Page 4
I
Exploded View Diagram
T6015B INCLINE BENCH
2
Page 5
3
Assembly Part List
Page 6
Hardware List
0 100
10 20 30 40 50 60 70 80 90 110 120 130 140 150
Inches
0
123456
/
12
/
14
/
34
/
34
/
34
/
34
/
34
/
34
/
14
/
14
/
14
/
14
/
14
/
12
/
12
/
12
/
12
/
12
Millimeters
4
Page 7
Parts List
Item No. Description QTY
Main upright
Pad upright
Middle base
Back upright
Weight bar storage
Slip upright
Seat pad
Feet beam
Socket cap screw M8*20
Allen bolt M10*30
Allen bolt M10*60
Allen bolt M10*120
Allen bolt M10*125
Allen bolt M8*15
Washer 11* 23*2
Nylon locknut M10
Foot pad
Plug RT50*100
Long pin
Back pad
Guide sleeve RT50*100/RT40*80
Plug RT40*80
Allen bolt M10*80
Spring washer 10
Curing washer 11* 23*2
Allen wrench S=6
Curing block 49*12
Rubber sleeve 25.3* 34.5*57
Safety pin
Philip bolt M6*12
Washer 6.6* 15*1.6
ΦΦ
Φ
ΦΦ
Φ
ΦΦ
ΦΦ
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28
29
30
31
32
1
1
1
1
2
1
1
1
1
18
2
4
2
1
22
8
5
4
1
1
1
1
2
18
6
1
6
6
4
4
4
Page 8
6
Note
Assembly Instructions
Assembly of the takes professional installers about 2
hours. If this is the first time you have assembled this type of
equipment, plan to spend more time. It is strongly recommended to
assemble the equipment by professional installers. You may find it
quicker, safer, easier to assemble this equipment with the help of a
friend, as some of components may be large, heavy or awkward to
handle alone. It is important that you assemble your product in a
clean, clear, uncluttered area. This will enable you to move around
the product while you are fitting components and reduce the
possibility of injury during assembly.
As with any assembled part, proper alignment and adjustment is
critical. While tightening the fasteners, be sure to leave room for
adjustments. Do not fully tighten the fasteners until instructed to do
so. Be careful to assemble the components in the sequence
presented in this guide.
FLAT BENCH
Page 9
STEP1
1)Attach the Pad upright(2#)to the Main upright (1#)use:
2)Attach the Middle base(3#)to the Main upright(1#)and
Pad upright(2#)use:
3)Through Four Saftey pins(30#)to the Main upright (1#)
attened by:
Two Allen bolts(12#)M10*120
Four Washers(15#) 11* 23*2
Two Nylon Locknuts(16#)M10
Two Allen bolts(13#)M10*125
Two Allen bolts(23#)M10*80
Eight Washers(15#) 11* 23*2
Four Nylon Locknuts(16#)M10
Four Philip Screws(31#)M6*12
Four Washers(32#) 6.6* 15*1.6
ΦΦ
ΦΦ
ΦΦ
7
Page 10
STEP2
8
1)Attach the Back upright(4#)to the Main upright (1#)use:
2)Through the Slip upright(6#)to the Pad upright (2#)
attened by:
Two Allen bolts(11#)M10*60
Four Washers(15#) 11* 23*2
Two Nylon Locknuts(16#)M10
One Socket cap screw(9#)M8*20
ΦΦ
Page 11
STEP3
1)Attch the Back pad (20#)to the Pad upright (2#).
Attch the Seat pad (7#)to the Slip upright(6#)use:
Through the Feet beam(8#)to the Pad upright (2#)
attened by:
Six Allen bolts(10#)M10*30
Six Washers(15#) 11* 23*2
Six Spring Washers(24#) 10
2)
One Allen bolt(14#)M8*15
ΦΦ
Φ
9
Loading...