Impulse IPC122-833-FL User Manual

IPC122-833-FL
1U Fanless Barebone System with Intel® Atom™ Processor N2800, Multiple LAN and Multiple COM
NEW
Power Input with terminal block
DRAM Socket
Supports one
2.5" SATA HDD
Features
®
Atom™ processor N2800 1.86 GHz
Intel
capacity
Fanless operation
Operating temperature range of -10°C ~ +60°C
Isolated RS-232/422/485, CAN Bus and DIO
IEC61850-3 and IEEE1613
Front view
CFast™ socket for storage
DDR3DDR3
Fanless Low PowerIP30
Extended
Temperature
DDR3
CAN Bus
Specifications
Standard Color Silver Construction Heavy-duty cold-rolled steel, IP30 CPU Intel System Board SBC87833 BIOS AMI UEFI BIOS System Memory 1 x 204-pin DDR3-800/1066 SO-DIMM, max. up to 4 GB I/O Interface (Front) 1 x Power on/off , 1 x Reset , 2 x USB 2.0 I/O Interface
(Rear)
Serial Port 2 x isolated RS-232
LAN 4 x 10/100/1000Mbps Ethernet
USB 4 x USB 2.0 DIO 1 x isolated DI/DO (4-IN/4-OUT)
VGA 1 x DB15 connector Power Input 1 x AC/DC power input with terminal block
CAN Bus 1 x CAN Bus (DB9 Connector)
®
Atom™ processor N2800 1.86 GHz onboard
8 x isolated RS-232/422/485 ESD protection: 2.5KV
Magnetic isolation protection: 1.5KV
DI: Input range: 0~30VDC at 25Hz Logic level 0: Close to GND Logic level 1: Open DO: Logic level 0: +/-12VDC min to +/-30V max. (source to DI) Logic level 1: 0 min. to +/-3VDC max.
Magnetic isolation protection: 2.5KV
335
Rear view
Watchdog timer 1 sec, 255 levels LEDs System: Power, HDD
Gigabit LAN: 10/100/1000 Link LED x 8 Serial: TX x 10, RX x 10 Digital I/O : LED x 8
Storage 1 x on board CFast™ socket
1 x 2.5" SATA HDD drive bay Installation Rack mount Power Supply Power Input Range 130~370VDC & 85~264VAC
Power Protection SCP (Short Circuit Protection)
OVP (Over Voltage Protection) Power Consumption 45W Certification IEEE61850-3, IEEE1613
* All specifications and photos are subject to change without notice.
Ordering Information Packing List
IPC122-833-FL (P/N: E26G122100)
1U fanless barebone system with Intel® Atom™ processor N2800, Multiple LAN and Multiple COM
*Specifications and certifications are based on options and may vary.
1 x IPC122-833-FL unit 1 x utility CD 1 x screw pack 4 x Foot pad 2 x thermal pad for DRAM 2 x Rack mount handle 2 x Rack mount Ear 1 x HDD Mylar 8 x 5-Pin Phoenix connector 2 x 6-Pin Phoenix connector
Dimensions
DOCAN
LGN
DI
Overview
Embedded
Systems
Embedded
Systems for
Transportation
Embedded
Field
Controllers
Embedded
MicroBoxes
Industrial
Barebone
Systems
Industrial
Chassis
Backplanes
Power
Supplies
Front & Rear Metal Panel I/O Layout
3 5
1 2
1. 19-inch rackmount
2. USB2.0 x 2
3. LEDs Ethernet x 4 DO x 4, DI x 4 Serial Port TX x 10, RX x 10
6
4
4. Reset Button
5. Power Button
6. HDD LED
7 11 129
8 10 13 14 15
VGA
7. .
CAN Bus
8
9. 10/100/1000Mbps
Ethernet x4
10. USB2.0 x 4
Rear viewFront view
RS232 Serial Port x2
11. (DB 9 male)
12.
RS232-422-485 Serial Port x8
(Terminal Block)
DI
DOCAN
LGN
13.DI x4,DO x4 (Terminal Block)
14.AC Power Input
15.GND
Peripherals &
Accessories
Appendix
* All specifications and photos are subject to change without notice. © 2013 Axiomtek Co., Ltd. All rights reserved.
axiomtek.com
336
Loading...