Impulse 8B49 User Manual

SensorLex 8B Isolated Analog Signal Conditioning Products

8B49

Voltage Output Modules

Description

8B modules are an optimal solution for monitoring real-world process signals

and providing high-level signals to a data acquisition system. Each 8B49 module

accepts an input signal from a non-isolated source, then isolates, filters and

converts the signal to a high level process voltage output.

Signal filtering is accomplished with a four-pole filter optimized for time and

frequency response which provides 80dB per decade of normal-mode-

rejection above 100Hz. One pole of this filter is on the system side and the other

three are on the isolated field side.

A special output circuit in the 8B49 module provides protection against accidental

connection of power-line voltages up to 40VAC continuous. Clamp circuits on

the I/O and power terminals protect against harmful transients.

The modules are designed for installation in Class I, Division 2 hazardous

locations and have a high level of immunity to environmental noise.

▲

Features

 Accepts High Level Voltage

 Isolated Process Voltage Output

 1500Vrms Isolation

 ANSI/IEEE C37.90.1 Transient Protection

 Output Protected to 40VAC Continuous

 110dB CMR

 100Hz Signal Bandwidth

 ±0.05% Accuracy

 ±0.02% Linearity

 Low Drift with Ambient Temperature

 UL Listing Pending

 Mix and Match Module Types on Backpanel

Figure 1: 8B49 Block Diagram

For information call 800-444-7644

SensorLex 8B Isolated Analog Signal Conditioning Products

Specifications

Module

Input Voltage Range ±5V, 0 to +5V, ±10V, 0 to +10V

Input Voltage Maximum ±20V (no damage)

Input Resistance ≥1MΩ

Output Voltage Range ±5V, 0 to +5V, ±10V, 0 to +10V

Over Range Capability 5% at 10V output

Output Drive ±20mA max

Output I Under Fault, Max 30mA

Output Protection

Continuous 40VAC max

Transient ANSI/IEEE C37.90.1

CMV, Output to Input

Continuous 1500Vrms max

Transient ANSI/IEEE C37.90.1

CMR (50 or 60Hz) 110dB

NMR (3dB at 100Hz) 80dB per Decade Above 100Hz

Accuracy

Nonlinearity ±0.02% Span

Stability

Noise

Bandwidth, -3dB 100Hz

Response Time, 90% Span 5m s

Power Supply Voltage +5VDC ±5%

Power Supply Current 120mA Full Load, 55mA No Load

Power Supply Sensitivity ±100ppm/%

Mechanical Dimensions 1.11" x 1.65" x 0.40"

Environmental

Emissions EN61000-6-4 ISM, Group 1

Immunity EN61000-6-2 ISM, Group 1

NOTES:

(1) Includes nonlinearity, hysteresis and repeatability.

(1)

Zero ±10ppm/°C

Span ±50ppm/°C

Output, 100kHz 1.5mVrms

(h)(w)(d) (28.1mm x 41.9mm x 10.2mm)

Operating Temp. Range -40°C to +85°C

Storage Temp. Range -40°C to +85°C

Relative Humidity 0 to 95% Noncondensing

Radiated, Conducted Class A

R F Performance A ±0.5% Span Error

ESD, EFT, Surge, Voltage Dips Performance B

Typical at TA=+25°C and +5V power

8B49

±0.05% Span (0-10mA Load)

±0.075% Span (10-20mA Load)

Ordering Information

Model Input Range Output Range

8B49-01 0V to +5V -5V to +5V

8B49-02 -5V to +5V -5V to +5V

8B49-03 -5V to +5V 0V to +5V

8B49-04 0V to +10V -10V to +10V

8B49-05 -10V to +10V -10V to +10V

8B49-06 -10V to +10V 0V to +10V

8B49-07 -5V to +5V -10V to +10V

Visit our website www.dataforth.com