Impossible INSTANT LAB Quick Start Manual

THE INSTANT LAB

QUIck START

We know you are anxious to start

using your Instant Lab, but please

take a moment to read these brief

instructions before you begin.

GETTING READY

1 2 3 4 5 6 7 8 9

Download and install the free
Impossible Project App to
your iPhone
Search for ‘Impossible
Project’ in the App Store
simply scan the QR code to
the far top right.

®

or iPod Touch®.

SM

or

Slide the lm door latch to
open the lm door. Push the
lm cassette all the way in.
Close the lm door.

Note Please check lm pack­aging for development time,
handling and storage details.

Press and hold the eject
button for 1 second to eject
the lm darkslide.

Note Eject the darkslide only
once each time after inserting
a new lm pack.

USING THE INSTANT LAB DONE!

Pull the tower up until all
5 sections of the tower have
clicked rmly into place.
Remove the cradle cover
that’s protecting the lens.

Launch the Impossible
Project App on your iPhone.
Choose ‘Instant Lab’ from
the menu and follow the
instructions on the screen to
choose and edit your image.

When ready, place your iPhone
on the cradle with the screen
facing down. Once in the cra­dle, the iPhone ash will turn
on. Within 3seconds, pull the
shutter slide all the way out.

Note iPod devices will sound
an alert instead of the ash.

After the ash goes off,
push the shutter slide back
in. Once the shutter slide
is back in, you can safely
remove your iPhone.

Press the eject button to
eject your instant photo.
Shield your photo from light
during development! See lm
packaging for details.

Remove your iPhone and
replace the cradle cover
toprotect the lens. Press tabs
on either side of each tower
section to collapse the tower.

the-impossible-project.com/lab

Thank you for your photos:

Jake Messenger, Sam Horine, Patrick F. Tobin

Apple, iPhone, iPod, App Store are trademarks

of Apple Inc., registered inthe U.S. and other countries.