importvet SV-2 User Manual

SV-2

WiFi ultrasound scanner
for reproductive diagnosis

User manual

Introduction

The SV-2 wireless probes are state-of-the-art veterinary
ultrasound instruments.

Unlike traditional veterinary ultrasound scanners with a cable
connected to the probe, the SV-2 is wireless and has no cable.

The SV-2 probe has a built-in ultrasound image processor,
the power supply and the wireless signal module to connect
to the main unit.

The main unit has now been replaced with a mobile device.
The probe acts as a WiFi access point and displays the image
via the SmartVus app.

This manual provides an overview and must be read carefully
before the device is used.

SV-2: Wi-Fi Probe

2

1. Characteristics

Screen: iOS or Android mobile device
Scanning: 80° sector-based
Probe: 3.5 MHz transducer
Depth: 1 00 - 190 mm
Display Mode: Mode B
Scales of grey: 256 levels
Battery life: 5 hours
Size: 140 mm x 45 mm x 40 mm
Weight: 200 g

SV-2: Wi-Fi Probe

3

2. Start

For your protection, please read these safety instructions before starting the probe.

2.1 Unpacking

The SV-2 probe is carefully packed to avoid damage during transport. Before opening
the box, note any visible damage to its exterior during transport.

The items must be checked to ensure everything has been received.
The following table includes the items included:

Items

SV-2 ultrasound probe

USB charging cable

Wrist strap

User manual

Dustproof case

Wireless charger

Each item must be examined to notify of any defects or damage that may have occurred
during delivery, despite it being carefully packed. Where this is the case, please contact
your distributor immediately to inform of the problem.

Included

2.2 Installing the app

If the SmartVus app is not installed on your mobile device, go to the App Store or Google
Play and search for “SmartVus”. When you find the app, download it free of charge.

SV-2: Wi-Fi Probe

4