Impex MP-3100 Owner's Manual

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

MARCY PLATINUM

MP 3100

Model

MP 3100

Retain This

Manual for

Reference

01-27-05

OWNER'S
MANUAL

IMPEX INC.

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: [phone] Fax: [phone]

www.impex-fitness.com

[e-mail]

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................... 1

IMPORTANT SAFETY NOTICES..................................................................... 2

HARDWARE PACK….......…............................................. ……………………. 3

ASSEMBLY INSTRUCTIONS...........................................……………………… 7

EXPLODED DIAGRAM……………………………………………………………... 20
PARTS LIST…………………………………………………………………………. 22

WARRANTY.................................................................................................…. 23

ORDERING PARTS.......................................................................................… 23

BEFORE YOU BEGIN

Thank you for selecting the MARCY PLATINUM MP3100 by IMPEX INC.
For your safety and benefit, read this manual carefully before using the
machine. As a manufacturer, we are committed to provide you complete
customer satisfaction. If you have any questions, or find there are
missing or damaged parts, we guarantee you complete satisfaction
through direct assistance from our factory. To avoid unnecessary delays,
please call our TOLL-FREE customer service number. Our Customer
Service Agents will provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[e-mail]

1

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire
manual before you assemble or operate your machine. In particular, note the following
safety precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or
physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to
properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE
AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.
ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

2

HARDEWARE PACK

3

HARDEWARE PACK

4

HARDEWARE PACK

5

HARDEWARE PACK

6

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.
It is recommended two or more people assembling this machine to avoid possible injury.
STEP 1 (See Diagram 1)

A.) Attach the Left & Right Base Frames (#7 & 8) to the Rear Vertical Frame (#3). Align the holes

and secure with two M10 x 2 ½” Carriage Bolts (#91), Ø ¾” Washers (#101), and M10 Aircraft
Nuts (#98). DO NOT tighten all the Nuts and Bolts yet.

B.) Attach the Weight Glide Base (#5) to the Rear Vertical Frame. Align the holes and secure

with two M10 x 2 ¾” Carriage Bolts (#90), ؾ” Washers (#101), and M10 Aircraft Nuts (#98).

C.) Slide two Lower Safety Frames (#12) onto the Front Vertical Beams (#1). Use a M18 Lock

Knob (#52) to lock each Safety Frame at selected slot.

D.) Attach one Front Vertical Beam (#1) to the Right Base Frame (#8). Secure it with two M10 x 2

¾” Carriage Bolts (#90), one 4 ¾” x 2” Bracket (#25), two Ø ¾” Washers (#101), and two M10
Aircraft Nuts (#98). Repeat the same step to install the other Front Vertical Beam.

E.) Attach the Front Top Beam (#6) to the Front Vertical Beams. Secure each end with two M10

x 2 ¾” Carriage Bolts (#90), one 4 ¾” x 2” Bracket (#25), two Ø ¾” Washers (#101), and two
M10 Aircraft Nuts (#98).

7