IMPETUS IE6800 AM, IR 6800am User Manual

User's manual

IE6800/imp e t u s

WEEE WARNING：
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.

Contact your local government for information regarding the collection
systems available.

If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain,
damaging your health and well-being.

When replacing old appliances with new ones, the retailer is legally
obligated to take back your old appliance for disposal at least for free of
charge.

Testing specification :
Low voltage Directive - EN60335 - 1
E&E Directive - EN62233
EMC Directive - EN55014 - 1
EN55014 - 2
EN61000 - 3 - 2
EN61000 - 3 – 3

Features of product with CE mark:
Mechanical and electrical safety.
Symbol of high quality.
Reliability assurance

Introduction/Safty Guideline...................................................................1 2

Exploded View..........................................................................................

Parts List..............................................................................................4- 5

Assembly instruction...........................................................................

-

3

6-13

14- 18

Warm-up...........................................................................................18-19

Cleaning & maintenance..........................................................................19

Monitor Instruction............................................................................

INDEX

IE6800/imp e t u s

A. Introduction

This user's manual contains assembly, operation, maintenance and safety
information.

In the interest of safety, please make certain that you read and understand all
the information below.

B. Safety guideline

a. Read the user's manual and all accompanying literature. Follow it carefully

before using your machine.

b. This machine is intended for indoor home or light commercial location use

only.

c. Inspect your exercise machine prior to exercising to ensure that all nuts and

bolts are fully tightened.

d. Make sure machine is stable on the floor. Avoid uneven surfaces.

e. Most exercise equipment is not recommended for small children.Children

should not use the machine. Keep unsupervised children away from the
equipment.

f. Exercise equipment has moving parts. Keep others, especially children, at a

safe distance while exercise.

g. Make sure all devices are fully adjusted before use to avoid injury.

h. Remove all jewelry, including rings, chains and pins before exercising

i. Always wear suitable clothing and footwear during exercise. Do not wear

loose fitting clothing that could become caught in the moving parts of your
exercise machine.

j. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes

afterward. This allows your heart rate to gradually increase and decrease and
will help prevent muscle strain.

k. Never hold your breath while exercising. You should breathe at a normal rate

in conjunction with the level of exercise being performed.

l. Rest adequately between workouts. Muscles tone and develop during these

rest periods. Beginners should workout twice a week and increase gradually
to 4 or 5 times per week.

1

INTRODUCTION / SAFETY GUIDELINE

IE6800/imp e t u s

m. Do not “over train” Incorrect or excessive training may result in injury.

n. Warning that any of the adjustment devices should not be left projecting.

IMPORTANT :

THE MAXIMUM RECOMMENDED WEIGHT CAPACITY FOR YOUR
EQUIPMENT IS KGS.

Warning :
Before commencing with any exercise program, please consult your family

Physician. If at any time during exercise you feel faint, dizzy or experience pain,
stop and consult your family physician, the manufacturer may use same as a
defense to any claim for injuries, damage or loss. The above warnings are in no
way intended to limit or modify the consumer's remedies for breach of
warranties pursuant to applicable Federal and State laws of regulations. They
are being supplied strictly to ensure the safety of the individuals using this
product.

The safety level of the equipment can be maintained only if it is examined

regularly for damaged and wear.

The appliances are not for children under 14 years of ages.

Safe distance :
Front and back : 100cm
Left and right sides : 100cm

Important:
Read all instructions carefully. Assemble the unit in accordance with the steps

in the manual. Lay out all parts on the floor and check if you have all the parts
included completely before beginning assembly. In case of a discrepancy, pls
call the customer service department of the store for assistance.
Replace defective components immediately and keep the equipment out of use
until repaired.

150

2

IE6800/imp e t u s

3

Exploded View

B1

B11

B10

B2

B4

B5

B6

A10

D12

D11

B2

B9

B7

B8

B7

B9

A6

F5

D7

D8

A10

A10

D9

D10

D11

D14

D9

D10

B2

B3

D1R

D7

D8

F3

F7

F6

A30

D11

D10

D9

F4

F1R

F2

E8

D10

F10

F9

F2

E1R

E4

D14

A4

E3

D5

E5

E7

A25

A28

A26

D2

D3

D4

C6

E6

C7

D14

C8

C9

A27X30PIEZAS

A29

A23R

A10

D13

C2

C1

C3

C4

C5

C11

C1

C2

C7

D13

D14

A2

G2

A19

A22R

A20

A3

A10

C6

G1

A22L

A19

A20

A23L

A10

A24

A28

F2

F2

E9

F10

F9

D10

F1L

A10

A27X30PIEZAS

A18

A14

A15

A15

A17

A16

A13

A11

A12

A5

A4

A8

A1

A7

D4

D3

A30

D2

D5

D1L

F5

D8

D7

D6

D7

D8

A10

D12

D11

D10

D9

D14

A9

F8

F7

F6

F3

E8

E1L

E3

E5

A4

D14

E4

E7

E6

A21

E9

D6

F8

E2

E2

A31

A3

A10

C10

C12

C12

E9

E9

IE6800/imp e t u s

4

PARTS LIST

NO. NAME SPECIFICATION Q'TY NO. NAME SPECIFICATION Q'TY

A1 Main frame 1 B4 Fixed foot pad Φ76.2 pipe use 2
A2 Fan wheel Φ450 1 B5 Flat washer M5×Φ13×1.5T 2
A3 Tension motor 1 B6 Self-tap screw M5×16mm 2
A4 Ball bearing 6004ZZ 4 B7 Moving wheel Φ76 2
A5 Nut 6-10T 1 B8 Allen bolt M8×40mm 2
A6 Allen bolt M10×16mm 2 B9 Dome nut M8 2

A7 Allen bolt M10×65mm 4 B10

Aluminum rail

trimming

4

A8 Spacer

Φ25.1×Φ21.1×

58.5mm

1 B11 Allen bolt M6×10mm 8

A9 Sensor fixing 1 C1 Crank set 2

A10 Self-tap screw M4×12mm 15 C2 Crank cover 2
A11 Nut 3-26×6T 2 C3 Belt pulley Φ310 1
A12 Nylon lock nut M6 1 C4 Shaft 1
A13 J-type bolt M6×60mm 1 C5 Belt 498J8 1
A14 Idle frame 6T 1 C6 Nut for shaft M10 2
A15 Flat washer Φ10×Φ23×2T 4 C7 Tri-crank cover 2
A16 Ball bearing 6200ZZ 2 C8 Spacer Φ24×Φ20.4×5mm 2
A17 Flat screw M10×35mm 1 C9 Allen bolt M8×20mm 4
A18 Flat screw M8X16mm(1.4mm 1 C10 Nut M8 4
A19 Hand pulse set 2 C11 Magnet Φ15×7 1
A20 Cap Φ31.75 4 C12 Allen bolt M6×10mm 4

A21 Foam grip Φ31.75×3T 2 D1R

Pedal arm

assembly ( R )

1

A22R

Handle

trimming cover

1 D1L

Pedal arm

assembly ( L )

1

A22L

Handle

trimming cover

1 D2 Ball sleeve Without flange 2

A23R Fan cover ( R ) 1 D3

Universal ball

head

2

A23L Fan cover ( L ) 1 D4 Ball sleeve With flange 2

A24 Fan outlet 1 D5 C-clip C type R45 2

A25 Fan disk 2 D6 Spacer

Φ15×Φ12.35×

67mm

2

A26 Stretch net 6 D7 Bearing sleeve 4

Ball Bearing

A28 Self-tap screw M4×15mm 12 D9 PU wheel 4

A29

Self-tap Philips

screw

M4×25mm 7 D10 Flat washer M8×Φ20×2T 6

A30

Self-tap Philips

screw

M4×10mm 4 D11 Nut M8 4

A31 Hand pulse 2 D12 PU roller cover 2

B1 Guide rail set 1 D13 Nut M8 2
B2 End cap 4 D14 Flat washer M8*2.0T*23 2
B3 Adjustable pad Φ50 M12+ nut 2 E1R Hand rail ( R ) 1

4A27 Self-tap screw M4×8mm 30 D8 6201ZZ

IE6800/imp e t u s