SIZZLE ‘N CHILL - HEAVY DUTY
REFRIGERATED BASES
Model Numbers
IHR-XX-RM-36
IHR-XX-SC-36
IHR-XX-RM-72
IHR-XX-SC-72
Remote or self-contained
refrigeration available.
IHR-2-1FT-1HT-RB24-RM72 shown
Easy to read, front mounted
thermometer.
Drawer dividers support
fractional pan configurations.
Oversized drawer guides and
stainless steel bearings hold up
to 275 lbs. (125 Kg).
SIZZLE ‘N CHILL - Self-contained or remote refrigeration available with any combination of open burners
French tops, Hot tops, Griddle tops and broilers.
- Self contained systems require no installation, simply plug in 110 volt outlet.
- Foamed-in-place polyurethane insulation throughout cabinet and drawers ensure temperature maintenance.
- Insulation prevents temperature migration between cooktop and refrigerated base.
- Drawers are self closing for convenience and safety.
REFRIGERATION SYSTEM - 1/5 hp compressor motor for energy efficiency.
- Electrical requirements are 120V, 3 amps.
- Unitized refrigeration components for easy service access.
- Condensation is eliminated in a non-electrical, self-contained drip pan located under condenser unit.
TEMPERATURE MAINTENANCE - Maintains 36° - 40° F (2.2° - 4.4° C) internal drawer temperature.
- Temperature maintained even when ambient temperature reaches 100° F (37.80° C).
- Easy to read, front mounted thermometer.
VERSATILE PAN CONFIGURATIONS - 36" (914 mm) models have 2 drawers each drawer holds 2
full size pans.
- 72" (1829 mm) models have 4 drawers each drawer holds 2 full size pans.
- Drawer dividers/pan supports (included). Dividers support fractional pan configurations
- Drawers holds up to 6" (152 mm) deep pans.
EXTERIOR FEATURES - Stainless steel guides and bearings withstand 275 Lbs. (125 Kg) of weight.
- Stainless steel front, drawer fronts and sides. Center pull handle is flush to drawer face.
- Stainless steel front, sides, stub back, and drawers. Welded and polished stainless steel seams.
- Enclosed front 1-1/4" (32 mm) manifold.
- Common ledges and backguards are available as options for a seamless, professional look.
- Large 7" (178 mm) stainless steel landing ledge.
- Plate mounted 6" (152 mm) heavy duty casters on self-contained models.
- One year parts and labor warranty.
www.imperialrange.com
www.imperialrange.com
SC-4
SIZZLE ‘N CHILL - HEAVY DUTY
REFRIGERATED BASES
HEAVY DUTY REFRIGERATED BASES
MODEL UNIT DRAWERS CAPACITY (KG) LBS
IHR-XX-RM-36 Remote 2 27-1/4" (692 mm) 4 full size Determined by cook top
IHR-XX-SC-36 Self-contained 2 27-1/4" (692 mm) 4 full size Determined by cook top
IHR-XX-RM-72 Remote 4 27-1/4" (692 mm) 8 full size Determined by cook top
IHR-XX-SC-72 Self-contained 4 27-1/4" (692 mm) 8 full size Determined by cook top
Measurements in ( ) are metric equivalents.
NOTES
- “RM” denotes remote refrigeration
- “SC” denotes self-contained condensing unit
MODEL DIMENSIONS DIMENSIONS
IHR-XX-RM-36
IHR-XX-SC-36
IHR-XX-RM-72
IHR-XX-SC-72
* to cooktop
CONDENSING NUMBER OF PAN SHIP WEIGHT
CRATED
36" w x 38" d x 36" h*
(914 x 965 x 914 mm)
36" w x 38" d x 36" h*
(914 x 965 x 914 mm)
72" w x 38" d x 36" h*
(1829 x 965 x 914 mm)
72" w x 38" d x 36" h*
(1829 x 965 x 914 mm)
Determined by cook top
Determined by cook top
Determined by cook top
Determined by cook top
ELECTRICAL REQUIREMENT
HORSEPOWER VOLTS AMPS MAX.
1/4 HP 120V 3 amps
6ft. (1829 mm) power cord with 3 prong plug provided
CLEARANCE REQUIREMENTS
For use only on non-combustible floors. Legs or
casters are required for non-combustible floors.
Provide 0" clearance from non-combustible surfaces
and 8" (203 mm) from combustible surfaces.
Contact factory if curb mounted.
OPTIONS AND ACCESSORIES
- Cabinet extensions, contact factory with size
requirements
- Many modular cooktops available,
see H-14 and H-18
1128 Sherborn Street Corona, CA 92879
800.343.7790 Ph: 951.281.1830 Fx: 951.281.1879
www.imperialrange.com
E-mail: imperialsales@imperialrange.com
SC-4 1/14 © 2014 Imperial Commercial Cooking Equipment Printed in the U.S.A.
Imperial reserves the right to change specifications at any time without prior notice and without any obligation for past or future equipment purchases. Visit www.imperialrange.com for specification updates.