Imperial Commercial Cooking ICRA-1 User Manual

SPECIALTY RANGES

CHINESE RANGES

Model Numbers

ICRA-1 ICRA-2
ICRA-3 ICRA-4
ICRA-5 ICRA-6
ICRA-7 ICRA-8

Water cooled top and built-in
drain system help control stove
top temperature.

Knee level “L” shaped handle on
jet burners conveniently
adjusts gas keeping hands free
for cooking.

Jet burners are available in 18,
23 and 32 tip styles.

3-ring burner has two
adjustable gas valves for inner
and outer rings.

ICRA-1 shown with optional casters

WATER COOLED TOP - Manually-controlled or automatic Chinese swing faucets available.

- Manual faucet services two woks.

- Automatic faucets are located behind each wok hole.

- Built-in drain system controls the temperature of the stove top.

KNEE LEVEL CONTROLS ON JET BURNERS - Conveniently located "L" shaped handle adjusts

burner keeping hands free for cooking.

4 BURNER STYLES - Jet and ring burner styles are available:

- Anti-clogging 18 tip jet burner with 125,000 BTU (37 KW) output.

- 23 tip jet burner has a 125,000 BTU (37 KW) output.

- 32 tip jet burner with160,000 BTU (47 KW) output requires a 20" (508 mm) minimum hole.

- Three-ring burner has a total output of 110,000 BTU (32 KW) and requires a 16" (406 mm) minimum hole.

- Two adjustable gas valves for inner and outer rings.

- All burners have continuous pilots for instant ignition.

EXTERIOR FEATURES - Stainless steel front, sides, top, high backsplash and pipe rack.

- Large 7" (178 mm) stainless steel landing ledge.

- Models available with 1 to 8 wok holes.

- Many wok hole sizes are available: 13", 14", 16" 18", 20", 22" and 24" (330, 356, 406, 457, 508, 559
and 610 mm).

- Welded and finished seams for a professional look.

- 12-3/4" (324 mm) heavy duty legs have adjustable feet.

- Many options and accessories are available.

- One year parts and labor warranty.

www.imperialrange.com

www.imperialrange.com

S-1

SPECIALTY RANGES

CHINESE RANGES

MAX NUMBER OF SHIP WEIGHT

MODEL WIDTH BURNERS (KG) LBS

ICRA-1 36" (914 mm) 1 (136) 300
ICRA-2 60" (1524 mm) 2 (249) 550
ICRA-3 84" (2134 mm) 3 (362) 800
ICRA-4 114" (2896 mm) 4 (478) 1055
ICRA-5 142" (3607 mm) 5 (634) 1400
ICRA-6 174" (4420 mm) 6 (747) 1650
ICRA-7 194" (4928 mm) 7 (905) 2000
ICRA-8 214" (5436 mm) 8 (1019) 2250

Measurements in ( ) are metric equivalents.

NOTES

Specify location of gas inlet - left or right rear.
Specify Drain Outlet - left rear, right rear or front drain. (Drain is usually on the opposite side of the
gas inlet.)

Plumbing: All outlets should be roughed in low - 8" (203) from the walls or from the floor.
Total length:Total of all cylinder diameters + total space between holes, and right and left edge.

Allow 6" (152) for each space and 14" (356) for front Drain Basket.

MODEL DIMENSIONS CRATED DIMENSIONS

ICRA-1

ICRA-2

ICRA-3

ICRA-4

ICRA-5

ICRA-6

ICRA-7

ICRA-8

* to cooktop

36" w x 41" d x 33" h* (914 x 1041 x 838 mm) 40" w x 42" d x 37" h (1016 x 1067 x 585 mm)
60" w x 41" d x 33" h* (1524 x 1041 x 838 mm) 65" w x 42" d x 37" h (1652 x 1067 x 585 mm)
84" w x 41" d x 33" h* (2134 x 1041 x 838 mm) 89" w x 42" d x 37" h (2261 x 1067 x 585 mm)

114" w x 41" d x 33" h* (2896 x 1041 x 838 mm) 119" w x 42" d x 37" h (3023 x 1067 x 585 mm)
142" w x 41" d x 33" h* (3607 x 1041 x 838 mm) Ships in two pieces. Contact factory for dimensions
174" w x 41" d x 33" h* (4420 x 1041 x 838 mm) Ships in two pieces. Contact factory for dimensions
194" w x 41" d x 33" h* (4928 x 1041 x 838 mm) Ships in two pieces. Contact factory for dimensions
214" w x 41" d x 33" h* (5436 x 1041 x 838 mm) Ships in two pieces. Contact factory for dimensions

MANIFOLD PRESSURE MANIFOLD
NATURAL GAS PROPANE GAS SIZE

5.0" W.C. 10.0" W.C. 3/4"

Specify type of gas and elevation, if over 2,000 ft.

CLEARANCE REQUIREMENTS

For use only on non-combustible floors with legs or
casters. 0" clearance from non-combustible side and
rear walls. Provide 6" (152 mm) minimum clearance
from combustible side walls and 0" from combustible
wall at rear.

OPTIONS AND ACCESSORIES

- Hole sizes available at no additional cost:
13" (330 mm), 14" (356 mm),16" (406 mm),
18" (457 mm), 20" (508 mm), 22" (559 mm),
and 24" (610 mm)

-

Wok Hole Adapter to reduce diameter of hole,

specify hole dimensions

- Special depth available

- The following 3 Burners are available at no additional

cost. Specify type of burners for each cylinder

1. Three-ring Burner, 16" (406) hole minimum,

110,000 BTU (32 KW)

2. 23-Tip Jet Burner, 125,000 BTU (37 KW)

3. Anti-clogging 18-Tip Jet Burner,

125,000 BTU (37 KW)

- 32-Tip Jet Burner, 160,000 BTU (47 KW) 20" (508) hole

minimum, (Additional charge)

- Heavy duty manually controlled chinese swing
faucet will service two woks. Automatic faucets are
located behind each cylinder

- Extra manual faucet

- Stainless Steel Burner Covers

- Front Drain Basket for one or two burner models
Rear Drain is standard for ICRA-1 and ICRA-2.

- Stainless Steel Side Splash Extensions

- Hong Kong style

- Oil Holes 8-1/2" (216 mm)

- Extra 6 Pan Stainless Steel Sauce Pan, 9 Pan Stainless
Steel Sauce Pan and 12 Pan Stainless Steel Sauce Pan

- Water Wash System for Stainless Steel Back splash

- Chrome Legs, set of 4, 6 and 8

- Casters, set of 4, 6 and 8

1128 Sherborn Street Corona, CA 92879

800.343.7790 Ph: 951.281.1830 Fx: 951.281.1879
www.imperialrange.com
E-mail: [e-mail]

S-1 5/15 © 2015 Imperial Commercial Cooking Equipment Printed in the U.S.A.

Imperial reserves the right to change specifications at any time without prior notice and without any obligation for past or future equipment purchases. Visit www.imperialrange.com for specification updates.