Imperial Oban Marble, Oban Basin Installation Instructions Manual

INSTRUCT29
REV120111 B/MM

General Installation Instructions for Oban Basin Stands

Important Information:

Please check the products for transport damage and that contents are complete
before installation.
Consult a qualified plumber if you have any problems installing this product.
Complaints made following installation regarding the above cannot be accepted.

Installation Guide - Introduction

Thank you for purchasing this imperial product. These instructions relate to the following products.

Oban Marble Console

Before you start: Check you have the necessary tools for the installation.
It is advisable to prepare a clear area to assemble the products. Lay a soft
blanket or sheet to protect the metal finish from scratches.

Tools Required

Hand Held Drill Safety Goggles Spirit Level Tape Measure Pencil

h

Assembly Instructions

a

Ref Part Qty
a Left Leg x1
b Right Leg x1
c Front Trim x1
d Side Trim x2
f Wall Screws x4
g Hex Head Screws x8
h Washers x12
i Floor Screw x2
j Floor Peg x2
N/a Hexagonal Key Tool x1

d

g

h

g

C

i

j

f

Oban Basin Stand

g

d

h

b

* Please Note: The illustration shown relates to
the Oban Basin Stand however assembly of the
marble console components are typically the same.

** Towel rail is not available on Troon stands

2 of 4

i

j