TVS150
Simply Impeccable
Product Introduction
TV stand with Built-in Home Theatre System
Thank you for purchasing our product (TVS510).
CAUTION : To reduce the risk of electric shock,
do not remove cover (or back) no user-serviceable
parts inside refer servicing to qualified service
personnel.
The TV Stand designed with the most advanced SRS TruSurround HD/HD4
technology in the world, which brings you multi-channel surrounded sound effect. This outstanding TV stand with the Built-in Home Theatre System will
greatly enrich your audio entertainment. The simple and compact design with its
at TV panel enhances the appearance of our product. We hope that it will bring
you many hours of enjoyment.Please read our manual carefully to insure proper
usage and safety of your product.
Contents:
1.Warning -------------------------------------------------------------------1
2.Safety Warning ---------------------------------------------------------- 2
3.Parts Description ------------------------------------------------------- 3
4.Front panel control ----------------------------------------------------- 4
5.Remote control ----------------------------------------------------------4
6.Rear Panel Control ----------------------------------------------------- 5
7.Assembly -----------------------------------------------------------------6
8.Specications ------------------------------------------------------------7
9. Using the appliance-------------------------------------------------8-11
10. Troubleshooting ------------------------------------------------------12
1.Warning
1
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the
The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on the apparatus.
2. Safety Warning
Leave 5.9 in. for ventilation. Do not block the pipe of the subwoofer.
Never open the cover and tryto
repair — refer servicing to
qualied personnel.
Do not operate this system if liquids,
uids or foreign substances have
entered the subwoofer.
2
Do not climb on this system. Do not scrape with rough or sharp objects.
3. Parts Description
1.Main box 6. Install screw
2. Subwoofer box 7. woofer piper
3. Glass plate 8. Connection strap
4. Control panel 9. Connection hole
5. Subwoofer 10. Cable
3
4. Front Panel Control
5. Remote Control
1. LCD screen
2. Volume up
3. Volume down
4. Standby
5. Mode
6. Receiver
7. 3.5mm AUX MP3 Input
1. Mute
2. Power On/Off
3. Reset
4. Volume up
5. Volume down
6. Subwoofer up
7. Subwoofer down
8. Center up
9. Center down
10. Surround up
11. Surround down
12. AUX
13. OPT
14. COX
4
6. Rear Panel Control
1. Power On/Off
2. Fuse
3. Power cable
4. Power cable
5. OPTICAL Input
6. AUX Input
5
7. Assembly
① Gently put the main box on both of the subwoofer boxes.
① Connect the main box with the subwoofer boxes by the holes and straps,
then push the main box ahead to fasten.
① Install screw into the subwoofer box holes.
① Put the glass plate upon it.
6
8. Specications
1. Output power (130W):
Subwoofer 30watts x 2
Center 18watts x 1
Front 13watts x 2
Front 13watts x 2
2. Frequency Response: 25Hz-20KHz
3. Power requirement: 120V.AC 60Hz
4. Dimension (W x H x D):
Subwoofer unit 7.4x13.8x15.23 in.
Satellite unit 46.6x5.7x15.23 in.
5. Carton Size (W x H x D): 49.8x18x17.4 in.
6. Net Weight: 92.6 lbs
Gross Weight: 102.5 lbs
PACKAGE CONTENTS:
1 Main box
2 Subwoofer boxes
2 Covers
1 User's manual
2 Singal cables
1 Remote control
4 Glass nuts
1 Glass
Note:
1. These specications are only for reference.
2. These specications are subject to change without prior notice.
7
9. Using the appliance
1) First, according to section No.7 – assembly, assemble the product correctly.
According to section No.6 – Rear panel control, connect the DVD/mp3/mp4, TV and the
product correctly.
2) Put the plug in the wall socket with the 220V/50HZ power supply. (Fig. 9-1)
3)Put two pieces of batteries into the remote control correctly. (Fig. 9-2)
Fig. 9-1
Fig. 9-2
4) Switch the power from “off” to “on” below the screen. (Fig. 9-3); the text ‘STBY’
shows on the screen at the same time (Fig. 9-4)
Fig. 9-3
Fig. 9-4
8
5) Press the ‘ST-BY’ button on the control panel or ‘POWER’ button on the remote
control, the product works. (Fig. 9-5)
Description: as the product with power on, the screen light turns of and the
product switch to sleep mode after 3 seconds if one does not press the ‘ST-BY’
button; press the ‘ST-BY’ button, the screen light turns on
Figure 9-5
Figure 9-6 Figure 9-7
6) Select the desired setting to input the signal:
(the product has COX,OPT and AUX mode to select, Fig. 9-5, Fig. 9-6 and Fig. 9-7)
A select the input mode from the ‘MODE’ button on the control panel
B selects the input mode from the ‘COX’, ‘OPT’ and ‘AUX’ buttons
on the remote control
IMPORTANT: to create a fantastic sound effect, switch the DVD output into PCM code
when the product uses ‘COX’ or ‘OPT’ mode (Fig. 9-8)
Figure 9-8 Figure 9-9
9
7) Volume choices:
A Main volume (Fig. 9-9)
a. Adjust the volume use ‘VOL+’ or ‘VOL-’ buttons on the control panel
b. Adjust the volume use ‘VOL+’ or ‘VOL-’ buttons on the remote control
B Subwoofer volume (Fig. 9-10): Adjust the volume use ‘SUB+’ or ‘SUB-’ buttons
on the remote control
C. centre volume (Fig. 9-11): Adjust the volume use ‘CEN+’ or ‘CEN-’ buttons
on the remote control
D Satellite volume (Fig. 9-12): Adjust the volume use ‘SUR+’ or ‘SUR-’ buttons
on the remote control
Figure 9-10
Figure 9-11
Figure 9-12
E. Mute (Fig. 9-13): press the ‘MUTE’ button on the remote control to switch to mute
state as the product plays; press any button, the product resume to play
Figure 9-13
Figure 9-14
Figure 9-15
10
7) Reset:
press ‘RESET’ button, the product resume to default setting
(Fig. 9-14, Fig. 9-15)
8) Shutdown steps:
A. press the ‘VOL-’ button on the control panel or remote control to make the product
volume down
B. press the ‘STBY’ button to switch the product to STBY mode
C shutdown (Switch the button ‘ON’ to ‘OFF’)
Tip: Unplug when the product will not been used for a long time
11
10. Troubleshooting
NO. problem Cause Solution
1.the plug does not be put in
the wall socket
Put the plug in the wall socket
2. the wall socket does no t
work
Make sure the wall socket ha s
220V/50Hz power supply
3. loose fuse Make sure the fuse is tighten
4. power off Switch the power from “off” to “on”
below the screen
1 The
appliance
does not
work at all
5.sleep mode Switch the power from “off” to “on”
below the s creen and press the ST-BY
button
1. no sound input Switch on the sound; make sure the
sound plays
2. no signal Connect the DVD/TV and the product
correctly
3. wrong play mode Switch to the right play mode
accordingly
2 No voice
4. Mute mode Press any button
3 The
subwoofer
no voice
Wrong connection of th e
subwoofer and the main
machine
Connect the subwoofer and the main
machine correctly
1. bad sound input Input the right sound
2. Interference by mobile
phone or others
Avoid the high frequency products’
interference
3.bad signal input Tighten the signal line
4 noise
4. strong signal input Vo lume down the sound input or adjust
the volume
1.wrong angel of the remote Aim at the reception when using the
remote
2.long distance of the remote
usage
Remote distance in 5 meters
3. bad batteries Replacing batteries
5 Remote
failure
4.wrong batteries Use right batteries
6 No voice of
the 2.0 RCA
input
Signal line insert into mp3 jack Make sure right connection of signal
line; at the 2.0 mode, use mp3 first then
2.0 RCA input
12
Loading...