Impecca ITAC10KSB21 Remote Guide

Impecca Window/In-Wall

Air Conditioner

Remote Control Users Manual

Remote Model N° RG32

1

Table of Contents:

– Remote Controller Specications ..................................................................p.i

– Features at a Glance .............................................................................. p.1

– Handling the Remote Control ..................................................................... p.1

– Replacing the Batteries ........................................................................... p.1

– Remote Control Functions ........................................................................ p.2

– LED Display ...................................................................................... p.3

– Using Various Buttons ............................................................................ p.4

– Timer Settings and Operations .................................................................... p.5

– Sleep mode ...................................................................................... p.6

– Contact Support ................................................................................. p.6

Remote Controller Specications:

CAUTION

• Do not mix old and new batteries of batteries of a dierent type.

• Do not leave hte batteries in the remote controller if it is not going to be used for 2–3 months.

• Dispose of the old batteries in special battery disposal collection containers at sales sites.

Model RG32A/E, RG32A/CE
Rated Voltage 3.0V(Dry batteries R03/LR03 x2)
Lowest Voltage of

CPU Emitting Signal
Signal Receiving Range 16 feet / 5m
Environment ~23° F to 140° F (-5°C to 60°C)

Temperature setting display:

Celsius scale (C°): RG51B14/(C)E, RG51B16/(C)E,RG51B18/(C)E,RG51B31/(C)E,RG51B19/(C)E-M,
RG51B20/(C)E,RG51B25/(C)E,RG51B27/(C)E,RG51B30/(C)E.
Fahrenheit scale (F°): RG51B/(C)EU, RG51B1/(C)EU, RG51B17/(C)EU,RG51B26/(C)EU, RG51B30/(C)
EU,RG51B32/(C)EU,RG51B31/(C)EU.

2.4 V

FEATURES AT A GLANCE:

• Multi-Operating modes: AUTO, COOL, DRY, HEAT (select models only), and FAN

• Timer settings for 24 hours

• Indoor Temperature Range Settings from 62° to 88°F (17°C to 30°C)

• Sharp Liquid Crystal Display (LCD) Unit

• Backlit display

SAVE TIME AND MONEY!

If you review this manual carefully, you may not need to call for service at all.

HANDLING THE REMOTE CONTROL

Use the remote controller within a distance of 8 meters from the appliance,
pointing it towards the receiver. Reception is conrmed by a beep.

CAUTION

• The air conditioner will not operate if curtains, doors or other materials block
the signals from the remote controller to the indoor unit.

• Prevent any liquid from falling into the remote controller. Do not expose the
remote controller to direct sunlight or heat.

• If the infrared signal receiver on the indoor unit is exposed to direct sunlight,
the air conditioner may not function properly. Use curtains to prevent the sun­light from falling on the receiver.

• If other electrical appliances react to the remote controller. either move these appliances or consult your
local dealer.

REPLACING THE BATTERIES

The remote controller is powed by two dry batteries (R03/LR03X2) housed
in the rear part and protected by a cover.

Step 1: Remove the cover by pressing and sliding o.
Step 2: Remove the old batteries and insert the new batteries, placing the
(+) and (-) ends correctly.
Step 3: Reattach the cover by sliding it back into position.

NOTE: When the batteries are removed, the remote controller erases all
programming. After inserting new batteries, the remote controller must
be reprogrammed.

NOTE: All drawings in this manual are
for illustrative purposes only. The actual
shape and functions of your remote may
vary slightly. Optional features on some
remotes are designated by an asterisk (*).

1

REMOTE CONTROL FUNCTIONS

2