Impecca AS313BT Operating Instructions Manual

Portable Bluetooth® Speaker System
With built-in MP3 player
Model No: AS313BT
Operating Instructions
Read the following notices and information carefully to ensure proper operation of your Bluetooth® speaker system.
This manual is solely provided for informational purposes and in no way constitutes a legally binding document between the manufacturer, distributor, and consumer.
INTRODUCTION:
Congratulations on your purchase of the Impecca Portable Bluetooth® Speaker System. Before using your speaker system, please read through this manual. This manual will help you use many of the exciting and useful features of your new unit.
WARNING
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING AND STORE IT FOR FUTURE REFERENCE. IT WILL BE HELPFUL TO YOU IF YOU ENCOUNTER ANY OPERATING PROBLEMS.
1) WARNING: To reduce the risk of electric shock, do not disassemble the unit. There are no user-serviceable parts
inside. Contact technical support for further assistance.
2) WARNING: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture.
3) Do not expose the adapter and Bluetooth® speaker system to any water (including drips or splashes). Objects filled
with liquids, such as vases and water bottles, should not be placed on the unit.
4) Keep the AS313BT unit away from direct sunlight and heat sources such as radiators or stoves.
5) Do not place the Bluetooth® speaker system on an unstable table, stand, tripod, bracket or cart. The unit may fall,
resulting in possible damage or injury.
6) Dispose of this unit properly respecting your local laws for electronics and battery disposal.
7) CAUTION: Danger of explosion if battery is incorrectly replaced.
8) WARNING: The battery shall not be exposed to excessive heat such as sunlight, fire or any other heat source.
9) WARNING: Only use attachments/accessories provided by the manufacturer.
European Union Electronic Waste Disposal Guidelines:
This symbol means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with you national legislation.
Package Contents
Bluetooth® speaker unit
USB (Type-A) to micro-USB with 3.5mm (1/8”) audio connection
User’s manual
AS313BT Page 2
Buttons and Ports Description
Mode
Previous track/Volume
❸ Next track/Volume up (+)
Pause/Phone
Top of Unit
Back of Unit
down (-)
OFF/ON: Power switch USB Input (for USB flash drives) microSD/trans flash slot (labeled TF) micro-USB input (for charging and line-in, using supplied cable)
Features
1) Small, high-powered fully-functional speakers system
2) Uses Bluetooth ® v. 2.1 for music streaming from your smartphone, tablet or other Bluetooth ®
compatible music source.
3) Built-in MP3 player can play music directly from a USB flash drive or microSD card (supports SDHC
and SDXC cards)
4) Standard 3.5mm line-in through micro-USB jack allows direct wired hookup to any audio device that
has a standard headphone (or line-out) jack.
5) User-replaceable rechargeable Li-ion battery allows for completely cord-free operation.
6) Ability to control source unit from the speaker system – Play, Pause, Previous track, Next track, etc.
(when in Bluetooth® or MP3 mode).
Getting Started and Bluetooth® Pairing
AS313BT Page 3
1) Charge your unit by plugging the (included) micro-USB end of the connection cable into the back of
the unit and USB-A end of the cable into a computer or powered USB wall adapter (not included).
2) While charging, you should see a red LED shining through the upper-right hand corner of the
speaker grill. When fully charge, the red LED will turn off.
3) To power on unit, slide rocker switch on back from “OFF” to “ON.”
4) You should hear a voice announce “Bluetooth Mode” or “Line-in Mode.” If not already in Bluetooth
Mode, cycle the Mode button until you hear “Bluetooth Mode.” Note that “Line-in mode” is for when you have a hardwired connection between your source device and the AS313BT.
a. Pairing Bluetooth®
i. When in “Bluetooth Mode” there should be a blue LED flashing quickly (located in
the upper-right-hand corner of the speaker grill). This shows that the unit is in pairing mode.
ii. On your source device (phone, MP3 player, tablet), start a “search for devices” in
your “Bluetooth” menu. The exact method varies from device to device.
iii. After a few moments, you should see a device labeled “AS313” in the list of found
devices. This is the device you should select.
iv. You should hear a two-tone sound from the speaker if the connection is successful.
At this point the blue LED should be steadily lit (not blinking) as long as your device is connected.
v. If your device moves out of range, or Bluetooth® is turned off, the speaker will emit
a polyphonic tone and the blue LED will begin to flash rapidly.
vi. Note: Once you have paired to a particular device, you should not have to pair
again, unless the device lost the settings. Upon powering on in the future (or switching back to Bluetooth from “line-in” mode, you will first hear “Bluetooth Mode.” However, after a few seconds, you should hear a two-tone sound and the blue LED should light steadily. No further intervention is required.
5) To use the line-in input instead of Bluetooth, press the Mode button briefly. You will hear “Line
in mode” and the blue LED will flash slowly.
Playing Music
1) To play music using a Bluetooth® device, first make sure you have paired your Bluetooth ®
compatible device with the AS313BT portable speaker (see directions above). If not already in Bluetooth Mode, choose it by cycling the “mode” button until you hear “Bluetooth Mode.” Then, on your device, begin playing whatever song you like as if you were listeing to it direclty on your device (or through headphones). The music should play through the AS313BT portable speaker system.
2) To play music* from a USB flash drive, simply insert the flash drive. You should hear a voice
announce “Play by USB drive.” Music will start playing automatically. (See Controlling Music Playback below for more details.)
AS313BT Page 4
3) To play music* from a TF or microSD card, simply insert a card containing MP3 music into the slot
Output Power: Max 3W
to micro-USB
Frequency Response: 280Hz-16KHz
labeled “TF.” You will hear a voice announce “Play by SD card.” (See Controlling Music Playback below for more details.)
4) To play music from a wired connection, connect the 3.5mm plug from the proprietary (included)
USB/3.5mm/micro-USB connector to your music device line-out or headphone recepticle and the micro-USB end into the back of the AS313BT portable speaker system. Then select “Line-in Mode” by cycleing the mode ❶button.
*Music played via microSD or USB must be in .MP3 format.
Controlling Music Playback
For the line-in mode, you must control the music playback from your device. You can hold down buttons ❷or ❸to adjust the volume.
For all other modes, you can also control the song selection and volume from the buttons on top of the unit. Use buttons and ❸to jump to previous and next songs, respectively. Hold down buttons ❷or ❸to adjust the volume. Use the Pause button (❹) to temporarily pause the song being played. Note: The volume control on your device will also impact the volume coming out of the speaker. For the highest quality sound, set the volume on your source device to a moderate level (not as loud as it gets).
Note: If you have both a USB flash drive and a microSD/TF card inserted, you can jump from one to the other via mode. As well, when finished playing songs from one of the media, the AS313BT will switch to the other media type for the next song and continue automatically from there.
Phone calls
This speaker system contains a built-in microphone and also operates as a speakerphone for your smartphone when in Bluetooth mode. If a call comes in while listening to music, you will hear a caller ID announcement (if available) followed by a ring sound. Press the Pause/Phone (❹) button to pick up the call. Speak normally. To end the call, press the Pause/Phone (❹) button again. For best results, speak at a close distance from the AS313BT speaker system.
Technical Specifications
Battery: removable Li-ion (400mAh 3.7V) Audio: monaural SNR: 85dB
Charging: Via DC 5V 500mA – 1A input Speaker: 43W Bluetooth range: up to 15M (barrier free)
External Audio input: standard 3.5mm stereo plug
AS313BT Page 5
Troubleshooting
Q: Why won’t my AS313BT power on? A: Ensure that the unit has been fully charged, by hooking up the provided micro-USB to USB-A
connector to a computer or USB wall power adapter (not included).
Q: Why does it take so long for my device to charge fully? A: It should not take more than a few hours. The red LED will extinguish after it is fully charged. Note
that the length of time to fully charge depends on the power amperage of your USB charging adapter. Most computers output 500mA. Some adapters range from as low as 200mA to as high as 2500mA. Charging time will vary greatly depending on what adapter is used. For best results, purchase an Impecca USB210 wall adapter.
Q: How come I can’t get my music device to play through Bluetooth ®? A: Follow instructions in the “Getting Started and Bluetooth Pairing” section above. If you cannot pair,
make sure that the blue light is flashing rapidly. If it is steady, you may be in a different mode. Press the Mode button briefly until you hear “Bluetooth Mode.”
Q: How come my AS313BT won’t keep a charge for long anymore? It has worked fine for a long time. A: All rechargeable batteries eventually get weaker with many charges. You can replace your battery by
ordering a replacement from an online retailer. Search for “BL-5C Extended Li-Ion Battery” and you should find a compatible replacement for a low cost.
Technical support
For questions not answered in this manual, or for warranty service, please contact Impecca Technical Support:
By phone: 1-866-954-4440 (9:00 AM to 6:00 PM Eastern Time) By e-mail: service@impeccausa.com Online: www.impecca.com
©2014 Impecca. Bluetooth is a registered trademark of Bluetooth SIG, Inc.
AS313BT Page 6
Loading...
+ 14 hidden pages