Collapsible Reector Discs
INSTRUCTIONS
Features
• Practical to use in studio or on location
• Folds into a compact circle for easy transport
• Free carry bag included
All photo s are for illus trative purposes only.
Stands are not included with I mpact Collapsible
Backgrounds unless purchased as a kit.
2
Introduction
Thank you for choosing the Impact Collapsible
Reector Disc. Impact reectors are practical for use
in the s tudio or on location. They come in many colors
and sizes. Visit our web site at
ww w.impactstudiolighting.com to see them all.
To change the reector color on a 5-in-1 or a 7-in-1
model Impact Collapsible Re ector Disc, unzip the
cover of the reector to access the color
combinations inside.
Collapsing a reector so it can t into its storage bag
is very tricky. It will take some pract ice to get it right .
Follow these instructions carefully.
3
Folding Instructions
Grasp the reector disc as shown above. Note that
the thumbs are on opposite sides of the disc.
4
Twist the reector into a gure-eight shape.
5
Folding Instructions (cont.)
Continue twisting while pulling the two sides
together.
6
The t wo sides will pass one in front of the other until
they are stacked together. The re ector will now t in
its carry bag.
7
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from defects
in materials and workmanship under normal consumer use for a period of one (1)
year from the original purchase date or thirty (30) days after replacement, whichever
occurs later. The warranty provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the provider’s discretion,
of any product that fails during normal use of this product in its intended manner and
in its intended environment. Inoperability of the product or part(s) shall be determined
by the warranty provider. If the product has been discontinued, the warranty provider
reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty provides you with specic legal rights, and you may also have additional
rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the defective
product to Impact along with the RMA number and proof of purchase. Shipment of
the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or
call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
IMPACT is a registered trademark of the Gradus Group.
www.gradusgroup.com
© 2014 Gradus Group LLC. All Rights Reserved.
GG2
Loading...