impact
Quikstik and
QuikStik+
INSTRUCTIONS
Setting up your QuikStik
QuikStik and QuikStik+
1
Use the two ip locks to adjust the
length of the QuikStik
2
Mount the bracket you want to use
on the top stud and tighten securely.
Additional QuikStik+ Adjustments
3
Use the two small knobs to adjust
the position of the swivel handle
4
Use the large side knob to adjust
the tilt of the swivel handle
Using the Strap
5
Use the slip lock to adjust the
length of the strap
6
Position the strap so that the
pocket points downward,
then insert the QuikStik
Using your QuikStik
QuikStik and QuikStik+
7
Using the QuikStik with
the Impact Quikbox
9
Without strap, using both hands
8
The QuikStik could also be used in
many other congurations, such as
with a standard ash bracket
10
With strap, using both hands
Additional QuikStik+ Positions
11
Without strap, using both hands
12
With strap, using one hand
Warranty
This Impact product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a
period of one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during normal
use of this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty provider reserves
the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with
specic legal rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Impact Customer Service Department
to obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com
or call Customer Service at 212-594-2353.
www.impactstudiolighting.com
Impact is a registered trademark of the Gradus Group.
© 2015 Gradus Group LLC. All Rights Reserved.
GG2
Loading...