imp act
Grid for Quikbox
INSTRUCTIONS
Attaching The Grid
1
Remove the grid from the bag
and spread it out completely.
3
Continue attaching the two sides
using the touch fastener, then
attach the bottom.
2
With the touch-fastner edge
facing outwards (towards the
front of the Quikbox), attach the
top edge rst.
4
There will be a small space
between the two grid edges to
accommodate the reective
panels on the Quikbox.
Removing The Grid
Remove the grid by grasping a corner and gently pulling it off
5
the Quikbox.
6 7
To fold the grid, grasp two
opposing corners and pull them
in opposite directions. The grid
will now be long and at.
Either roll or fold the grid
in thirds and replace in the
carry bag.
Quikbox with grid
Quikbox without grid
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with respect to this
limited warranty shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its intended
manner and in its intended environment. Inoperability of the product or part(s) shall
be determined by the warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specic legal rights, and you may also
have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department
to obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or
call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
IMPACT is a registered trademark of the Gradus Group.
www.gradusgroup.com
© 2014 Gradus Group LLC. All Rights Reserved.
GG2
Loading...