Impact LKB-5B, LKB-4B User manual

Page 1
Light Kit Bag 4B and 5B
INSTRUCTIONS
Page 2
Precautions
Please read and follow these instructions, and keep this manual in a safe place.
Clean the unit with a soft dry cloth.
Make sure the item is intact and that there are no missing parts.
All photos are for illustrative purposes only.
2
Page 3
Introduction
Thank you for choosing Impact.
The Impact Light Kit Bag 4B and Light Kit Bag 5B are light, sturdy, and durable cases that are ideal for any application where delicate and bulky lighting equipment needs to be safely transported. Ideally sized for LED panels, the Impact light kit bags are also suitable for studio strobe systems, continuous light systems, and a variety of equipment needed for studio or location.
The outer shell and interior unxed pieces are all reinforced with heavy-duty plastic panels to ensure the integrity of the LKB­4B and LKB-5B. Adjustable dividers can be congured to your needs and will ensure that lights and gear will remain organized and secure. A generous zippered mesh storage compartment provides plenty of room for accessories.
Each bag is made with a weather resistant, heavy-duty nylon shell supplemented with anti-slip rubber feet. Carrying options are provided with a detachable adjustable shoulder strap, overlapping top handles, and rubber grip side handles. For added security, the heavy-gauge dual zippers accept a lock (not included).
3
Page 4
Overview
1
2
1. Light Kit Bag
2. Padded side panels (2)
3. Shoulder strap
4
4
3
4. LKB-5B Internal dividers (3) LKB-4B Internal dividers (4) (not shown)
Page 5
Assembly Instructions
1. Open the bag and remove all contents.
2. Identify the L-shaped padded side panels, make sure the touch connect strips are at the top of the panels facing outward.
3. Place the L-shaped side panels into the bag so that the long and short sides correspond to the sides of the case. The brushed cotton fabric side of the panels should face the interior.
4. Attach the touch connect strips on the outside of the panels to the corresponding strips on the interior wall of the shell. Then attach the touch connect strips on the edges of the side panels to the fabric side of the adjacent side panel.
5
Page 6
Assembly Instructions
Recommended LKB-4B conguration for select Generay SpectroLED 500 Light Kits
LKB-4B
LKB-5B
5. Insert the internal dividers and position them according to your needs. Press the touch connect strips on the sides of the dividers to the interior fabric of the side panels to secure them in position.
6. Attach the shoulder strap by connecting the swivel hooks to the D-rings on the sides of the bag. Adjust the strap according to your needs.
7. To lock your bag, zip up the dual zippers so that they are adjacent. Thread your luggage padlock or TSA lock (available separately) through the loops on the zipper sliders.
6
Page 7
Specications
Material Weather-resistant, heavy-duty 600 denier nylon
Type of Closure Dual zipper closure that will accept
Carrying Options Adjustable and removable shoulder strap
Exterior Dimensions (W x D x H)
Weight 10 lb. (4.5 kg) 13.5 lb. (6.1 kg)
shell – black matte nish
user-supplied lock
Overlapping 2” handles with touch enclosure Rubber grip side handles
LKB-4B LKB-5B
20˝ × 15˝ × 12˝ (50.8 × 38.1 × 30.5 cm)
22˝ × 18˝ × 17˝ (55.9 × 45.7 × 43.2)
7
Page 8
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2015 Gradus Group LLC. All Rights Reserved.
GG2
Loading...