Impact LB-430L User manual

Light Bar Tilt Bracket

INSTRUCTIONS

Thank you for choosing the Impact Light Bar Tilt Bracket.
Use it to mount as many as four shoe-mount ashes, LED
panels, or other shoe-mount devices, to a single stand.

This sturdy, all metal bracket tilts, swivels, and features
a 5/8˝ receiver for mounting on light stands, tripods, or
booms. It locks securely with a non-slip, geared tooth
mechanism. The included adapter allows you to mount
to 1/4˝ or 3/8˝ threaded screws. Its umbrella shaft
socket accommodates all standard 7-8 mm umbrella
shafts.

The four shoe mounts are adjustable and can accept
standard shoes from a variety of devices. They can
move along the bracket length and rotate 360°, allowing
you to position and aim your lights in any direction.

This Light Bar Tilt Bracket was designed to give you
many years of trouble-free service.

CAUTION: These brackets are not intended for use with
umbrellas larger than 45˝. For safety, and to protect your
equipment, use weighted sandbags to stabilize your
light stand. Make certain your set-up is stable before
proceeding.

All images for illustrative purposes only.