Page 1
KCP-220P/B KCP-240/B
Extension Arm
Silver model shown
Page 2
Thank you for choosing Impact.
Extension arms are great accessories for holding framed light modifiers in
the fixed grip head, or for light fixtures weighing 10 pounds (or less) on the
16 mm (5/8˝) end of the arm.
Specifications
KCP-220P/B KCP-240/B
Extension arm length: 20˝ (50.8 cm) 40˝ (101.6 cm)
Grip head size 2.5˝ (6.35 cm)
Maximum load capacity: 10 lbs (4.54 kg)
Weight: 2.37 lbs (1.07 kg) 3.25 lb. (1.47 kg)
Recommended Accessories
• Impact KCP-200B Grip Head, Black - 2.5˝
• Impact LS-CT20M 20˝ C-Stand with Turtle Base, Silver
• Impact LS-CT40MB 10.75´ C-Stand with Turtle Base, Black
• Impact LS-CS40MK 10.75’ C-Stand Kit with Sliding Leg, Extention Arm
and Grip Head, Silver
• Impact VP-712BP Deluxe Varipole Set of Two, Black
• Impact VP-712SP Deluxe Varipole Set of Two, Silver
• Impact VPE-5B 59˝ Single Extension for Varipole, Black
Page 3
• Impact VPE-5S 59˝ Single Extension for Varipole, Silver
• Impact VPE-6B 78˝ Single Extension for Varipole, Black
• Impact CC-106R Super Clamp w/Ratchet Handle
• Impact CC-128 Double Super Clamp
• Impact LSA-CW10 Counter Balance Weight (10 lb)
• Impact SRP-118 Heavy Duty Swivel Pin
• Impact SRP-121 Baby Drop Down Pin
• Impact ME-107 Grip Head w/Super Clamp
Visit our website at www.impactstudiolighting.com for more Impact
accessories.
Warnings
• Do not attempt to disassemble or repair the equipment – doing so will
void the warranty, and Impact Studio Lighting will not be responsible for
any damage.
• Handle the unit with care.
• Clean the unit with a soft dry cloth.
• Keep this unit away from children.
• Use only parts provided by the manufacturer.
• Make sure everything is secure before proceeding.
• Make sure the item is intact and that there are no missing parts.
• Do not exceed the maximum load capacity.
Page 4
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer use
for a period of one (1) year from the original purchase date or thirty (30)
days after replacement, whichever occurs later. The warranty provider’s
responsibility with respect to this limited warranty shall be limited solely to
repair or replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specic legal rights, and you may also have additional rights that vary
from state to state.
To obtain warranty coverage, contact the Impact Customer Service
Department to obtain a return merchandise authorization (“RMA”) number,
and return the defective product to Impact along with the RMA number and
proof of purchase. Shipment of the defective product is at the purchaser’s
own risk and expense.
For more information or to arrange service,
visit www.impactstudiolighting.com
or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved.
Made in China
GG2
Loading...