HSS-24 Hexi 24
Speedlight Softbox
INSTRUCTIONS
Precautions ⚠⚡
• Please read and follow these instructions and keep
this manual in a safe place.
• Keep this unit away from water and any ammable
gas or liquid.
• Handle this unit with care.
• Keep this unit away from children.
• Use parts provided by the manufacturer only.
• Make sure this item is intact and that no parts are
missing before use.
• All photos in this manual are for illustrative purposes
only.
Specications HSS-24
Carrying case dimensions 23.2˝ × 7.5˝ × 6˝ (58 × 19 × 15 cm)
Softbox dimensions with bracket grip 24˝ × 24˝ × 21.3˝ (60 × 60 × 54 cm)
Softbox dimensions without
bracket grip
Softbox weight with bracket grip 1.5 lbs (680 g)
Softbox weight without bracket grip 0.95 lbs (430.9 g)
2
24˝ × 24˝ × 15.6˝ (60 × 60 × 39.6 cm)
Introduction
Thank you for choosing the Impact Hexi 24 Speedlight
Softbox. This lighting accessory works with hot shoe
speedlight ashes of any size. Sporting a highly reective
silver interior surface, the Hexi 24 includes a front diffuser
and inner bafe, providing the user with two layers of light
diffusing material. These layers soften and spread your
speedlight’s output over a larger surface area for a more
even and attering portrait light. The Hexi 24 Speedlight
Softbox produces a softened, directional light and naturallooking catch lights.
The adjustable bracket mount allows for the use of a
variety of remote triggering devices with your speedlight.
It may also be used without the softbox assembly to adapt
standard umbrellas to light stands or for handheld use.
The Hexi 24 is mountable on any standard 5/8˝ light
stand stud. Additionally, the quick and easy assembly,
bracket mount handle and included carrying case make
this softbox unit perfect for hand-held, run-and-gun style
photography.
3
Overview
1. Softbox
2. Flex rods
3. Flex rod release
4. Softbox ash
mouth
5. Flash bracket
tightening knobs
6. Flash bracket
mounts
7. Flash bracket
rods
8. Adjustable cold
shoe mount
9. Cold shoe mount
tightening knob
10. Handle
adjustment knob
11. Flash bracket
handle
12. Light stand
tightening knob
13. Light stand
mount
4
1
2
4
5
6
7
8
9
11
12
13
3
10
14. Umbrella mount
15. Umbrella adjustment
knob
16. Inner bafe
17. Bafe loops
18. Touch-fastener
19. Front diffuser
14 15
16
17
18
19
5
Assembly Instructions
1. Remove the softbox and the
ash bracket from the carrying
case.
2. Open the softbox by securing
the ex rods in place. Simply
push back each ex rod into
it's individual slot. You will
hear a clicking sound as you
push each ex rod into place.
Continue by securing opposite
rods rather than adjacent
ones until all six ex rods are
secured.
6
3. Insert the ash bracket rods
into the ash bracket mounts
on the rear of the softbox.
Adjust how far in the rods go
based on the height of your
ash unit and any accessories
to which it may be attached.
4. Turn the ash bracket
tightening knobs clockwise
until secure.
5. Remove the inner bafe and
front diffuser from the bag.
6. Install the inner bafe to the
softbox by securing the bafe
clips to the bafe loops on
the inner (silver) face of the
softbox. Do this by laying each
bafe clip's entry point against
a loop and tugging on the clip
with sufcient tension to pull it
into the loop.
7. Unfold the front diffuser and
attach it to the touch fastener
fabric inside the front rim of the
softbox. If you intend to attach
additional light modifying
accessories, such as a grid,
position the diffuser deeper
into the touch fastener, leaving
room along the outer rim.
7
Assembly Instructions
8. To adjust the tilt of the ash
bracket handle, turn the
handle adjustment knob
counterclockwise until the
tilt can be adjusted. Once
the desired tilt has been
established, secure the knob by
turning the handle adjustment
knob clockwise.
8
9. To mount the softbox to a 5/8”
light stand mount, place the
5/8” mount on the bottom of
the ash bracket handle onto
the light stand stud. Turn the
light stand tightening knob
clockwise to secure.
10. To mount your ash to the
Flash bracket, insert your ash
or remote triggering unit’s hot
shoe foot into the bracket’s
cold shoe mount. Adjust the
distance of the ash from the
softbox ash mouth by turning
the cold shoe mount tightening
knob counterclockwise until
loose. Adjust the mount by
sliding it up or down the
bracket until your ash is inside
the softbox ash mouth (You
may also have to readjust the
height of the ash bracket
rods. See page 6). Once the
optimal position is found, turn
the shoe mount tightening knob
clockwise until secure.
9
Takedown Instructions
1. After removing your ash, turn
the ash bracket tightening
knobs counterclockwise until
loose and remove the softbox
from the ash bracket handle.
2. If desired, remove the front
diffuser and inner bafe from
the softbox and place them in
the carrying case.
NOTE: The Hexi 24 can be
collapsed and stored without
removing the inner bafe and
front diffuser for quick setup
next use.
10
3. Release the ex rods from the
ex rod struts by pushing the
ex rod release buttons to the
right at the base of each rod.
4. Bunch the ex rods together by
lifting them all to the center of
the softbox and wrapping the
touch-fastener strap around
them before storing.
5. Return the softbox to the
carrying case.
6. Zip the carrying case closed to
secure its contents.
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of this product in
its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to replace it with a model
of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and
you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department
to obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com
or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved.
11
GG1
Loading...