Page 1
Fluorescent Socket Adapter
INSTRUCTIONS
Page 2
Parts Diagram
Standard
Edison base
Socket (4)
Warning
Use only uorescent bulbs.
Do not exceed 15 0W in any socket or a total of 600 W.
Page 3
Recommended Accessories
Impact Fluorescent Fix ture
The Impact F F-SA 4 Fluorescent
Socket Adapter was designed for
the FF-S1 Fluorescent Fixture. T he
FF-S1 has a bracket that tilts and
locks into position w ith a geared
tooth lock ing mechanism, and i t
mounts on any 5/ 8˝ stud. (Shown
wit h ligh t st and and bulb - no t
included)
Impact Sof tbox
The Impact Softbox for FF-S1
comes in two sizes; 50x50 cm and
50 x70 cm. This so ftbox can
accommodate the F F- S1 with a
FF-SA4 four-bulb socke t adapter.
It also ts the F F-S4 Fluorescent
Socket and the SF-ABRL16 0 Slave
Flash with LED Modeling Ligh t.
To see all of our lighting equipment ,
please see your lighting dealer or visi t our website:
impactstudiolighting.com
Images are for illustrative purposes only.
Page 4
One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a
period of one (1) year from the original purchase date or thirty (30) days
after replacement, whichever occurs later. The warranty provider’s
responsibility with respect to this limited warranty shall be limited solely to
repair or replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specic legal rights, and you may also have additional rights that vary
from state to state.
To obtain warranty coverage, contact the Impact Customer Service
Department to obtain a return merchandise authorization (“RMA”) number,
and return the defective product to Impact along with the RMA number and
proof of purchase. Shipment of the defective product is at the purchaser’s
own risk and expense.
For more information or to arrange service, visit impactstudiolighting.com
or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
gradusgroup.com
Impact is a registered trademark of the Gradus Group.
© 2018 Gradus Group LLC. All Rights Reserved.
®
IMPACT
A Gradus Group Brand
GG2
Loading...