
FB230L Twin Shoe
Umbrella Bracket
INSTRUCTIONS

Thank you for choosing the Impact Twin Shoe Umbrella
Bracket. Use it to mount t wo shoe-mount ashes, LED
panels, or other shoe-mount devices, to a single stand.
This sturdy, all metal bracket tilts, swivels and
features a 5/8˝ receiver for mounting on light stands,
tripods, or booms. It locks securely with a non-slip,
geared tooth mechanism. The included adapter allows
you to mount to 1/4˝ or 3/8˝ threaded screws. Its
umbrella shaft socket accommodates all standard 7-8
mm umbrella shafts.
The two shoe mounts are adjustable and can accept
standard shoes from a variety of devices.
This Twin Shoe Umbrella Bracket was designed to give
you many years of trouble-free service.
CAUTION: These brackets are not intended for use
with umbrellas larger than 45.˝ For safet y, and to
protect your equipment, use weighted sandbags to
stabilize your light stand. Make certain your set-up is
stable before proceeding.
All images for illustrative purposes only.

Recommended Accessories
Impact Umbrellas
Impact umbrellas come in white, white translucent, beaded
silver, black/ white conver tible, all in several dif ferent sizes.
Impact Light Stands
Impact has a complete line of light stands from its economical
LS-6B six-foot black light stand to 13-foot, air-cushioned, heavy
duty light stands, Turtle-base and Sliding-Leg C-stands.
Impact Super Clamp
This is a great complement to the Impact Twin Shoe Umbrella
Bracket. Used t ogether, the combination allows you to mount
two portable ashes to tubes 1/2˝ to 2-1/8 ˝ in diameter or
pract ically any rigid surface. T he Super Clamp is a versatile tool
for which you’ll discover dozens of uses.
Impact Sand Bags & Shot Bags
Impact Sand Bags and Shot Bags come in a variety of shapes,
weigh ts, and are either black or orange. They are used for
anchoring the bases of light stands and set walls. The
saddle-st yle bags have two w ings so they can be draped over
light stand legs. Each side of the bag has a hand strap for easy
handling and hanging on hooks . The outer shell is water
resistant , heavy-duty cordura ny lon.
To see all of our lighting equipment,
visit our website or see your dealer.

One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with respect to this
limited warranty shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product in its intended
manner and in its intended environment. Inoperability of the product or part(s) shall
be determined by the warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and
you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or
call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2015 Gradus Group LLC. All Rights Reserved.
GG2