Impact FA-300HS User manual

FA-300HS

Triple-Flash Hot Shoe
Adapter Mount

Thank you for choosing Impact.

The Impact FA-300HS Triple-Flash Hot Shoe Adapter
Mount lets you mount and sync three flashes on a
single adapter. You can fire the flashes at full power for
greater light output or, for faster recycle times, fire them
at half power. This unique adapter features a female
1/4˝-20 thread for universal mounting, and may be
combined with an umbrella, light panel, or other lighting
accessories (sold separately).

The Impact FA-300HS Triple-Flash Hot Shoe Adapter
Mount has a 3.5 mm jack, so you can use a sync cord to
connect the adapter to your camera or wireless receiver.
If you own an Impact PowerSync DC Radio Slave
System or a similar wireless unit, you can fire them all
with a single receiver attached to the adapter. While
not designed for use with high-voltage flashes, you can
use the Impact FA-300HS Triple-Flash Hot Shoe Adapter
Mount to mix and match flashes from most major digital
camera manufacturers.

Specifications

• Three hot shoe mounts

• 1/8˝ (3.5 mm) jack for sync cord or wireless receiver

• Thread size: 1/4˝-20 female

• Dimensions: 2.5˝ × 1.12˝ × 1.37˝ (63.5 × 28.57
× 34.9 mm)

• Weight : 1.6 oz (44 g)

Features

• Mount and sync three flashes on a single bracket

• 1/4˝-20 thread for universal mounting