Impact CS-16-TS, CS-16-R User manual

CS-16

ControlSync 16 System

INSTRUCTIONS

Introduction

The Impact ControlSync 16 system allows
you to control all compatible monolights
and strobes from one convenient location
with a reliable, easy-to-use controller.

The ControlSync 16 is a great solution to
speed up and simplify your workow.
Whether you work with a few ashes in a
single setup, or in a large studio with a
number of sets with many lights, you will
immediately see the advantage of being
able to make adjustments to your lighting
without the need to maneuver into
crowded, hard to reach places.

You can adjust the power level of each
ash or group of ashes in 1/10 stop
increments as well as controlling model
lamps or AF assist lamps, turning alert
sounds on or off and test ring and
triggering your entire lighting setup, all
from a central location. The ControlSync
16 also features 16 channels to avoid
interference and false triggers, along with
the ability to address 16 separate groups
for precision control of your lighting.

You may even nd that this convenience
frees you to experiment with new ideas
and styles. You’ll discover creative ways
to use your lighting to bring out your very
best work.

Warnings

Before using this product, please read
the following safety instructions
carefully in order to ensure your safety
and the proper operation of the Control
Sync 16 system. Failure to observe these
precautions could result in product
malfunction, re or explosion, electric
shock or other physical injury.

• Do not disassemble or modify. Should
the product break open due to
accidental damage, remove the
batteries and send it to an authorized
repair center.

• Keep dry. Do not handle with wet
hands, immerse in water, or expose to
rain or snow.

• Do not use in the presence of
ammable gasses.

• Keep out of reach of children. This
product contains small parts that may
pose a choking hazard. Should a child
swallow any part of this product,
consult a physician immediately.

• Turn off the transmitter or receiver
immediately should a malfunction
occur. Should smoke or any unusual
smell come from this product, shut it
off and remove the batteries
immediately. Send it to an authorized
repair facility for service. Continued
use may result in physical injury.

• Do not expose to high temperature. Do
not leave product in a closed vehicle in
the sun or other areas subject to
extremely high temperature.

• Keep away from strong magnetic elds.
Strong static or magnetic elds
produced by devices such as cell
phones and radios may lead to
malfunction.

• Observe precautions when handling
batteries. Batteries may leak or explode
if improperly handled.

Please observe the following precautions
when using batteries with this product.

- Use only batteries listed in this manual.
Do not mix new and old batteries or
different brand batteries.

- Read and follow all warnings and
instructions provided by the battery
manufacturer.

- Do not attempt to short-circuit or
disassemble batteries.

- Do not put batteries in a re or apply
direct heat to them.

- Do not attempt to install batteries in the
reverse direction.

- Batteries may leak when fully
discharged. To avoid damage to the
product, be sure to remove the batteries
if the product will not be used for an
extended period of time, or if the battery
power is low.

- Should uid from damaged batteries
come into contact with skin or clothing,
rinse immediately with fresh water.

Features