Page 1
CC-118
Micro Clamp
INSTRUCTIONS
Page 2
Introduction
Thank you for choosing Impact .
The Impact CC -118 Micro Clamp features a baby (5 /8 inch) receiver for
mounting an item with a baby pin. Of ten used for attaching a lighting
xture to an overhead pipe or a ver tical riser, this clamp is also suitable for
many ot her uses in the studio and on location.
Recommended Accessory
• Impact C A-100 Double End Spigot with 1/4″-20 and 3/8″ Male Threads
Visit our website at www.ImpactStudioLighting.com for more Impact
accessories.
Page 3
Specications
Maximum clamp tube size: 1.2 in. (3 0 mm)
Receiver size: 5/8 in.
Maximum load capacit y: 5 lb.
Warnings ⚠
• Please read and follow these instructions, and keep this manual in a
safe place.
• Handle the unit with care.
• Clean the unit with a sof t, dry cloth.
• Keep this unit away from children.
• Make sure everything is secure before proceeding.
• Make sure the item is in tact and that there are no missing parts.
• Do not exceed the maximum load capacit y.
• Use caution when mounting anything at the maximum load capacit y.
• All photos are for illustrative purposes only.
Page 4
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from defects in
materials and workmanship under normal consumer use for a period of one (1) year from
the original purchase date or thirty (30) days after replacement, whichever occurs later.
The warranty provider’s responsibility with respect to this limited warranty shall be limited
solely to repair or replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the warranty provider. If the
product has been discontinued, the warranty provider reserves the right to replace it with
a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specic legal rights, and you may also have additional rights that vary from state
to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain
a return merchandise authorization (“RMA”) number, and return the defective product to
Impact along with the RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2015 Gradus Group LLC. All Rights Reserved.
GG2
Loading...