imogenStudio Plus Cam Pro Quick Start Manual

+Cam Pro Quick Start Guide

2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS

INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user

to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the product.

Warning

To prevent Fire or Shock Hazards, Do Not Expose This

PRODUCT to Rain or Moisture.

Apparatus shall not be exposed to dripping or splashing
and no object filled with liquids, such as vases, shall be

placed on the apparatus.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

+Cam Pro Quick Start Guide

3

Regulatory Notices for USA

This equipment has been tested and found to comply
with the limits for a digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment

and receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV
technician for help.

You are cautioned that any changes or modifications
not expressly approved in this manual could void your

authority to operate this equipment.

The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to

Subpart B of Part 15 of FCC Rules.

+Cam Pro Quick Start Guide

4

Camera Mounting

To mount the +Cam Pro to a wall,
unscrew the base of the camera and
remove the metal plate.

With the included screws and
anchors, fasten the mounting bracket
on to the wall. Then, reattach the
base cover and screw the stand back
on to the mounting bracket.

+Cam Pro Quick Start Guide

5

1. iSecurity+ App

To get started, download the

iSecurity+ app from Apple’s App store

or the Google Play Store.

2. Connect to Power

Connect the +Cam Pro to the AC
power adapter, then plug your power
cord into the electrical outlet.