Focus Ring
Microphone
Power LED
Mister Robot-o
2
1. Install the Software
Please do not plug in the camera to your computer until the
software has been installed. Otherwise, the camera may
not function properly.
Insert the CD into your CD/DVD drive. The software installation
wizard will automatically start. If not, do the following:
Click on Start, and then My Computer or Computer.
Right-click on the CD or DVD drive icon, then click on
Autoplay.
Follow the instructions in the software installation wizard. When
prompted, please reboot your computer.
Mister Robot-o
3
2. Connect the Camera
After your computer has rebooted and logged into the desktop, the
software installation wizard will continue. If not, do the following:
Click on Start, and then My Computer or Computer.
Right-click on the CD or DVD drive icon, then click on
Autoplay.
When prompted, plug the camera into an available USB port.
Make sure your computer is connected to the internet.
Follow the directions in the software installation wizard to
complete your software installation.
Mister Robot-o
4
3. Complete Software Installation
The camera is ready to use after software installation is finished.
You may remove the CD from the CD/DVD drive.
Mister Robot-o
5
4. Using Seedonk®
To manually launch Seedonk®, double-click on the icon on
your desktop.
Enter your username and
password to log in. In the main
Seedonk window, you will see
your camera online with the
icon.
To view live video
from your camera,
double-click on your
camera name. From
the video viewing
window, you can also
take a snapshot or
record a video.
Record
Take
Mister Robot-o
6
Invite your friends and family to sign up with Seedonk® so that
you may share your cameras with them. Via any web browser,
visit the Seedonk® homepage at www.seedonk.com, select
“Account” from the top row of buttons and login with your
username and password. Near the bottom of the Account
Management page is a “Share the Love” invitation option where
you can enter email addresses along with selecting which cameras
you’d like to share.
To share your camera with
other Seedonk® users,
right-click on your camera
name, select
Share/Unshare… You can
then add people from your
Seedonk® contacts to your
camera’s share list as well as
remove people from the
share list.
Mister Robot-o
7
For people on your camera’s shared list to view it however, you’ll
need to set it in Autodonk mode by clicking the bottom center
button in Seedonk’s® main window. All cameras that require a
USB connection to a PC to function needs to be set to Autodonk
before others can view through them.
Autodonk allows you to leave your camera logged in and running
while you are away from your PC. You can then log in with the
same username/password from another PC with Seedonk installed
and view your Autodonk-ed webcam remotely.
If the camera has Pan-Tilt-Zoom (PTZ) capabilities, those controls
will also appear in the remote-view window. Friends and family
who you have shared this camera with may see through it if it is
Autodonk-ed at the time they sign in to their Seedonk IM client
accounts; they will NOT be able to control it, though.
Please note:
The PC that the camera is connected to must remain powered on
for the Autodonk mode to work.
For more information and to obtain additional help on Seedonk®,
please visit www.seedonk.com/faq.htm
Mister Robot-o
8
5. Using the Mister Robot-o Toolbar
The Mister Robot-o Toolbar will automatically appear when you
start Seedonk or other live video applications such as AMCap and
instant messaging applications.
If a live video application is already running, double-clicking on the
icon in the lower-right corner of the taskbar will also start
the Mister Robot-o Toolbar.
To manually launch the Mister Robot-o Toolbar, Click on Start, then
Programs, then ImogenStudio Mister Robot-o webcam, and finally
Mister Robot-o Toolbar.
Mister Robot-o
9
6. Mister Robot-o Toolbar Features
Digital zoom
on/off
Digital zoom
control slider
Take snapshot
Settings menu
Auto tracking on
Auto tracking off,
manual tracking
Manual tracking
controls
Mister Robot-o
10
Safety Information
Do not point the camera directly at the sun to avoid damage to the
image sensor.
Keep the camera away from heat to avoid electric shocks.
Keep the camera away from rain or moisture.
Do not manually force the camera or lens to rotate, pan, or tilt.
Doing so may damage the camera.
Do not attempt to open, dismantle, repair, or service the camera.
Doing so may cause electric shocks and other hazards.
Any evidence of misuse, abuse, or tampering will void the Limited
Warranty.
For More Information
For the latest camera driver updates or to learn more about
ImogenStudio products, please visit www.imogenstudio.com
Loading...