Honorific mobile phones user, thank you for choosing our
mobile phone!
Our cellular phones is according with the communication
industry standards of PRC, and also according with the
standards of European and American, and are approved
for GSM networks.
Your phone may be used internationally with various
networks depending on your roaming arrangements with
your service provider.
To use this phone you must subscribe to a GSM service
from a provider. We have included many features in this
device but their function depends on the features
available with your subscribed wireless network. Please
contact your service provider for more information.
We strongly recommend you carefully read and
understand this manual before using your phone in order
to keep it under best conditions for your effective usage
and utmost satisfaction.
Safety
Never attempt to disassemble your phone. You alone are
responsible for how you use your phone and any
consequences of its use.
As a general rule, always switch off your phone wherever
the use of a phone is prohibited.
Use of your phone is subject to safety measures designed
to protect users and their environment.
Do not use your phone in damp areas (bathroom,
swimming pool…). Protect it from liquids and other
moisture.
Do not expose your phone to extreme temperatures lower
5
than - 10°C and higher than + 55°C.
The physicochemical processes created by chargers
impose temperature limits when charging the battery. Your
phone automatically protects the batteries in extreme
temperatures.
Do not leave your phone within the reach of small children
(certain removable parts may be accidentally ingested).
Electrical safety
Only use the chargers listed in the manufacturer’s
catalogue. Using any other charger may be dangerous; it
would also invalidate your warranty. Line voltage must be
exactly the one indicated on the charger’s serial plate.
Aircraft safety
When traveling by plane, you will need to switch your
phone off when so instructed by the cabin crew or the
warning signs. Using a mobile phone may be dangerous
to the operation of the aircraft and may disrupt the phone
network.
Its use is illegal and you could be prosecuted or banned
from using cellular networks in the future if you do not
abide by these regulations.
Explosive materials
Please comply with warning signs at petrol station when
personnel asking you to switch your phone off. You will
need to comply with radio equipment usage restrictions in
places such as chemical plants, fuel depots and at any
location where blasting operations are under way.
Electronic equipment
To avoid the risk of demagnetization, do not let electronic
devices close to your phone for a long time.
Electronic medical equipment
Your phone is a radio transmitter which may interfere with
6
electronic medical equipment or implants, such as hearing
aids, pacemakers, insulin pumps, etc. It is recommended
that a minimum separation of 15cm be maintained
between the phone and an implant. Your doctor or the
manufacturers of such equipment will be able to give you
any advice you may need in this area.
Hospitals
Always make sure that your phone is switched off in
hospitals whenso instructed by warning signs or by
medical staff.
Road safety
Do not use your phone when driving. In order to give your
full attention to driving, stop and park safely before making
a call. You must comply with any current legislation.
Distance of operation
This phone model has been tested and meets
radiofrequency exposure guidelines when used
As follows:
·Against the ear: place or receive a phone call and hold
the phone as you would a wire line telephone.
·Body worn: when transmitting, place the phone in a carry
accessory that contains no metal and positions the phone
a minimum of 2.5cm form your body. Use of other
accessories may not ensure compliance with
radiofrequency exposure guidelines. If you do not use a
body worn accessory and are not holding the phone at the
ear, position the phone a minimum of 2.5 cm from your
body,
·Data operation: when using a data feature, position the
phone a minimum of 2.5cm from your body for the whole
duration of the data transmission.
7
Icon
Function description
Network signal strength:
number of the more stronger the
signal;
Battery capacity
number of the more power the more
full;
SMS
SIM1/SIM2 have unread SMS
Missed call
SIM1/SIM2 have missed calls
Used profiles
Different icons show different icon:
General, Silent, Meeting, Outdoor
Headset
Plug in headset
Alarm
Alarm function opened
2. Quick start
2.1 Icon Explain
8
Stopwatch
Stopwatch function turn on
Key lock
Show key and screen lock
2.2 Knowing the Keys
1. Left soft key/Right soft key: Implement the functions
shown in the lower left/right hand corner.
2.Call/Answer key 1 (Green key): Press after dialing to
connect by SIM1Card. Press if there is an incoming call to
answer. Press from standby to go to call records list of
SIM1Card.
3.Call/Answer key 2: Press after dialing to connect by
SIM2 Card.
Press if there is an incoming call to answer.
Press from standby to go to call records list of SIM2 Card.
4.End/Power key (Red key): Long press to switch phone
on/off; Press to end, reject call; or to exit a menu.
5. OK key: Confirm or accept selection in menu access.
Press from standby to enter the selected shortcuts list
function.
6. MP3 key: Press from standby to enter the audio player
playing interface.
7. Navigator Keys: Press the up/down/left/right direction
in menu to scroll, browse or in edit page to move cursor. In
idle mode, press the up/down/left/right direction keys to
9
select the shortcut function showed on the bottom of the
screen, and then press the OK key to confirm.
8.0-9 alphanumeric keys: Press corresponding keys to
input numbers when dialing or numbers and characters
when editing.
From Standby: Long press “2” to “9” key to dial speed dial
numbers (as defined in the menu [Phonebook
/Phonebook settings / Speed dial]).
Press the alphanumeric key [W ] to input “+” symbol for
international access in the dialing interface.
Press the alphanumeric key [P] to input “p” symbol for the
fixed extension number.
9.# Key: Press in standby to input “#” character; long
press from standby to activate or deactivate silent mode.
10.*(star)key: Press in standby to input “*” character,
press the left soft key + * key to lock or unlock the keypad
in the idle screen.
2.3 Install SIM card
This phone supports two GSM SIM cards. Find SIM
card’s groove in the back of the phone and slide it
completely there. During installation, please make
sure the chip is facing downwards and pay attention to
slot direction.
Note:
1. Keep SIM card out of children’s touch.
2. Any abrasion or folding could easily damage
SIM card, so please be extremely careful when you
insert, Remove and preserve it.
10
3. Please make sure that you have cut off the
power supply and have taken out battery
before you remove SIM card.
2.4 Install T-flash card
1. First switch off the phone and remove the battery.
2. Push the metal card holder toward the bottom of the
phone and lift the released end of the holder.
3. Place the memory card into the holder with the metal
contacts face down and push the holder until it locks into
place.
Note:
1.To avoid damaging memory card, please do not
plug memory card fast or frequently.
2. Please regularly backup information in the
cards on other equipment when you use Cards
like T-flash! Improper use or other uncertain
factors may cause the damage or loss to the
content in the cards.
2.5 Installing Battery
Align the battery chip with the metallic salient point in
battery jar, insert the battery until it is inserted into the
battery jar. Slide battery cover into back of the phone until
it is locked.
2.6 Battery Charging
insert one end of the charger, i.e., the charging plug into
attachment mode and the other end into electrical outlet,
Screen will display the charging sign. After charging is
finished, just pull out the plug.
Note:
1. Please use the standard battery and charger, or
may explode.
2. If the battery is completely discharged, the
11
battery icon should be in charge after 2 to 3
minutes to appear. Generally based on the current
state of the phone (if boot, call, etc.) of different
charging time for 2 to 5 hours.
3. Please use the charger, charging as much as
possible to avoid using USB cable.
4. To ensure optimal battery performance, the
completion of two to three times the battery
charge and discharge cycles. Several new battery
initial charge, please charge more than 10 hours
straight.
2.7 Switching on/off
Long press the Red key to switch your phone on or off.
1. If there is no SIM card, SIM card is defective, or SIM
card contact is loose, you will be prompt with a warning
after powering on, shut down and check your SIM and its
installation.
2. If inserted one GSM SIM card only into the phone,
meanwhile phone code and PIN code is turn on. When
switched on, after entering the PIN code and phone code,
the phone enter the standby mode by the current SIM.
3. If inserted two GSM SIM cards, meanwhile phone code,
PIN1 code and PIN2 code are all turned on. When
switched on, you will be prompted to enter the code one
by one. After switched on, the phone will automatically
search the network.
4. If the phone detected authorized network, the screen
will display network name and signal strength;If there is
no authorized network is found,the phone can only make
emergency calls or use non-communications features.
12
3. Call function
3.1 Dialing telephone
In standby mode, press the corresponding numeric keys to enter
the phone number that you want to dial, including necessary
area codes. Press the Clear key to delete erroneous inputs;
if inserted one GSM SIM card, press the Call/Answer key 1 to
make a call when done to connect.
Note: If inserted two GSM SIM card, press the Call/Answer
key 1 to make a call by SIM1 card, press the Call/Answer key
2 to make a call by SIM2 card.
1. Dialing Fixed/Land Line Extensions: You cannot directly get
through some fixed line extensions, and need to dial the
telephone exchange or trunk line first and then press [P] key to
switch until “P” appears on the screen. And then dial the
extension.
2. Making an International Call: To make an international call,
press [W] key to switch until the prefix symbol "+ " of
inter-national call displays in screen.
3. Dialing from Phonebook: Enter the Phonebook via the menu
to enter the phonebook list, use the Up/Down Navigator keys to
scroll to the desired contact, or press the first letter of the name
of the desired contact as saved in your phonebook for quick
access to names beginning with the letter then scroll to the
desired one.
4. Dialing from Call history: Enter the Call center (press the Call/Answer key 1 or Call/Answer key 2 from standby or via
13
the menu), use the Up/Down navigator keys to scroll to the
desired contact.
.
3.2 Receiving telephone
When there is an incoming call, the phone will give
corresponding alert, if your network supports caller ID, the
screen will display caller’s name or number (depending on
whether there is information of the caller in your
phonebook).
1. Press the green key or press the Left soft key and
confirm [Answer] to answer the incoming call.
2. If function of [call center/call setting/Advanced setting/
Answer mode] is selected as [Any-key], press the any key
to answer the incoming call except the Right soft key or
the Red key.
3. If you do not want to answer an incoming call, press the
Red key or the Right soft key [Reject] to reject it.
You can also press the Red key to end a call.
4. During a call, you can press the Up/Down navigator key
to adjust receiver volume.
3.3 call in the menu
During a call, press the right soft key can also open / close
the hands-free function, press the left soft-key into the
options:
- Swap*: Is maintained in the current call and switch
between calls
- Conference*:Into the multi-party conference call, you
can follow the prompts to answer the waiting call, to add
multi-session conference call will be maintained; and the
party conference in private conversation, the call to keep
all other parties; the parties to keep the party; the end of
14
the current Calls and all calls remain.
- Hold/Retrieve single call*: The current call on hold or
resume the call
- End single call*: end off the current call.
- End all calls*:end off the current call and the hold call
- Transfer*: the function need network support.
- New call: enter the dial-up interfaces.
- Phonebook: enter the phonebook list of interfaces.
- Messages: access to the message menu.
- Call history: access to call history list.
- Sound recorder: record the current call.
Note:
Recording of the call, in some countries is illegal.
Therefore, when you talk to Recording, should seek
prior approval from the other party's consent.
- Mute: mute on or off, open the case in the quiet do not
send local voice.
-
The dual tone multi-frequency switching
DTMF:
operation ( a call, you press the keys on the keyboard, the
audio signal will be sent to each other, for telephone
banking, automatic answering machine, etc.)
Note:
Denotes menu items only appear in specific
circumstances.
Such as: [Swap] exist only in the state of the phone
and call the phone only appears to be suspended. At
the same time for the conferencing, you need to the
appropriate service provider to subscribe.
15
4. File manager
In document management, you can open files in the
Phone or Memory card, you can select file or folder to
press the left soft key into [Options], you can do the
following(Perform different file operations are also
different, depending on the specific operation by the file):
- Open: open the file or folder.
- New Folder: the folder in the selected directory New
Folder.
- Rename: you can rename the select folder.
- Delete: delete the selected file or folder.
- use as: if the selected file is audio files, can set the file
use as SIM1/SIM2 incoming call; if the selected file is
image file, can set the file use as wallpaper, Screen saver,
Power on display or Power off display.
- Search: memory card can be customized to find all the
documents.
- Sort by: can "name", “time” ,"size" , "type" or “none” .
- Send: the select file can send by MMS or Bluetooth.
- Copy: you can copy the select file to other folders.
- Move: you can move the select file to other folders.
- Details: you can view the select file information.
Note:
Memory card as the default save path, order to facilitate
the use of multimedia features, please copy the
appropriate files to Audio, My music, Photos, Videos etc.
folders.
16
5. Phonebook
Stores and manages contacts that you often use.
There are two locations where you can store the names
and numbers that you regularly use, in the SIM memory
and in the phone memory. The volume of contacts can be
saved in SIM card depends on SIM capacity.
Enter the Phonebook list via the menu, including all
records saved in the phone and the SIM card. There are
different icons before different records indicating its
memory location.
As you are browsing, you could enter a character,
characters or number and jump to contacts whose names
(as saved in the phonebook) starting with or most closely
matching with the characters entered.
After searching for the name, press the Call/Answer key 1 or the Call/Answer key 2 to dial the number of record,
and press the Red key to end. Press the OK key to view
details of the record, press the Left soft key [Options] to
access the menu options:
·View: Display details of the currently recorded.
·Send text message: Send a text message to the
currently recorded.
·Send multimedia message: Send a multimedia
message to the currently recorded.
·Call: Dial the currently selected phone number.
·IP dial: If set and activated IP number in the [Call
center/Call settings/Advance settings/IP dial] option, you
can dial the currently selected phone number that adds IP
number.
·Edit: Modify the currently selected contactor record.
·Delete: Delete the currently selected record.
17
·Copy: Copy this record to SIM card if it is saved in phone
and vice versa.
·Move: Move this record to SIM card if it is saved in phone
and vice versa.
·Add to Blacklist: Add the phone number to the black list.
·Phonebook settings
Speed dial: Set phone’s speed dial functions.
Use the OK key at ‘Enable speed dial’ option to turn speed
dial function on or off. Select ‘Set number’, scroll to a key
number (8 available, from 2 to 9), press the OK key and
select ‘Edit’, scroll to the desired number to set as speed
dial number for the key and press the OK key.
When a number is set as speed dial and the function is
enabled, you can simply press and hold the
corresponding numeric key to the number for instant and
automatic dialing.
Extra numbers: Save and view up to 2 own numbers
(with name),service dialing number and SOS number.
Memory status: View the service condition of the SIM
card and phone’s phone book. The capacity of SIM card
depends on different SIM card.
Copy contacts: You can select ‘SIM to phone, phone to
SIM’ option to copy the phone book you want. Move contacts: You can select ‘SIM to phone, phone to
SIM’ option to move the phone book you want.
Delete all contacts: Select to delete the contacts from
SIM or the phone memory and you must input the phone
password.
Add new contact
This menu allows you to add the new record to the SIM
card or the Phone. Enter the phone number directly in
standby mode, then press the OK key to save the phone
18
number in the SIM card or the Phone.
First you need to select storage: To SIM or To Phone.
·To SIM: Select this option, press the OK key or press the Left Soft key [Edit] to enter name input interface and
input the corresponding name, then press the OK key or
press the Left soft key [Options] to select ‘Done’ and
confirm.
Press the Navigator key to switch to number column,
enter the phone number directly and confirm, finally press
the OK key or the Left soft key [OK] and confirm to save,
adding records to the SIM card will be done.
·To Phone: Add new phonebook record to phone.
19
Loading...
+ 43 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.