Page 1
查询RR2PI110AC供应商
Plug In Power Relay RR
General purpose 10 amp Plug In Power Relay, available in
2PCO and 3PCO
■ Large selection of models with dif ferent operating options
■ Arc barriers pr event flashover between contacts
■ Manual operator for circuit testing – colour coded for AC/DC
identification
■ Mechanical flag indicator showing armature operation
■ Gold flashed contacts
■ UL, CSA and VDE approvals
Options and ordering codes
RR 2 PI 230VAC
General purpose
power relay
2 pole changeover
3 pole changeover
2
3
X
R
N
For coil voltages
see table
Flag indicator
I
No flag indicator
LED indication
Flag and LED
New
Models
Manual operator
P
No manual operator
X
Specifications
Resistive Inductive
Rated load 10A @ 250V AC/30V DC 7A @ 250V AC/30V DC
Rated current
Maximum switching voltage 250V AC/125V DC
Maximum switching capacity 2500VA, 300W @ 30V DC, 50W @ 125V DC 1750VA, 210W @ 30V DC, 35W @ 125VDC
Minimum switching capacity 4V 25mA, 100V 1mA
Contact resistance (initial) 30mΩ
Operate time 20 m sec max
Release time 20 m sec max
Maximum operate frequency 1800 ops/hr at maximum rated load
Insulation class Group B250 (according to DIN VDE0110)
Dielectric strength (Coil – Contact) 2500V AC 50/60 Hz for 1 minute
(Between adjacent Contacts) 2000V AC 50/60 Hz for 1 minute
(Contact Gap) 1000V AC 50/60 Hz for 1 minute
Ambient operating temperatures
Mechanical ser vice life 20 million ops minimum
Electrical ser vice life
Protection degree IP10
Contact material AgCdO/Au 0.2um
Voltage range 80 - 110%
Must release voltage 15% AC coil/10% DC coil
Power consumption 2.5 VA AC 1.35 watts DC
Coil wire class F (155˚C)
1
To IEC 255-1-00, IEC 255-0-20 2IEC 255-7 (Cat.3) 3IEC 255-7 (Cat.2)
1
1
1
100,000 ops at rated load
10A
2
100mΩ
-40 to + 70˚C
3
Coil Data
Rated
Voltage
12 20 190mA 110 109mA
24 88 95mA 430 56mA
110 2000 20mA – –
230 7900 10mA – –
Coil Resistance Ohms Rated Current Coil Resistance Ohms Rated Current
A.C. Coils D.C. Coils
Page 2
Switching characteristics
N
7
10
6
10
5
10
4
10
0 0.5 1 1.5 2 2.5 3
Electrical life as a function of rated power for AC 50-60Hz
(non-inductive circuit) at 1800 ops/h
Power reduction factor in relation to cos ø of
inductive load
KVA
A
10
7
5
4
3
2
1
0.7
0.5
0.4
0.3
0.2
0.1
20 100
1
2
V
Value of current broken by contact as a function of contact voltage.
Resistive load DC.
1 – resistive load T=0 ms
2 – inductive load T=40 ms.
RR
Dimensions (mm) Terminal ar rangement
2 C/O
3 C/O
2 C/O
3 C/O
Loading...