IMO Miniature DC Photoelectric User Manual

Page 1

www.imopc.com

Operating voltage 10-30Vdc (QBR3 15-30Vdc) Load current 100mA (not emitters) Leakage current ≤ 10mA at Vmax (not emitters) Switching Frequency 1kHz Sensitivity adjustment Push button & External connection Red Light Emission 660 Nm, Pulsed Infrared Emission 880 Nm, Pulsed Laser Emission 650 Nm, Class II Current consumption See Model tables Indicators Yellow LED (Output), Green LED (signal strength) Supply electrical protection Polarity reversal and transient

imp

= 500V Output electrical protection Short circuit (auto-reset) and over-voltage Protection IP67 (EN60529) Housing material ABS Storage temperature -20° to 80°C Operating temperature -20° to 60°C Weight 40g (approx)

Miniature DC Photoelectric Switches QB

Miniature photoelectric switches for DC operation

❚ Models with IR, red light and red light LASER emission ❚ Red light emission for transparent object detection ❚ Digital "Teach In" sensitivity adjustment ❚ Position sensor with analogue output ❚ Contrast detection model ❚ UL and CUL approved ❚ IP67 protection

Options and ordering codes

QB I 6 0 P 0 E

Infrared emission Visible red LED emission Red LASER diode emission

I R L

6 A B C D 3 L F G

N P R S

Diffuse 300mm with sensitivity adjustment (R) Background Suppression 60mm (L) Background Suppression 100mm (R) Background Suppression 110mm (L) Background Suppression 150mm (I) Background + Foreground Suppression (R) Diffuse Contrast (L) Fibre Optic (R) Retro-reflective for clear material detection (R) Retro-reflective 1m (L) Retro-reflective 2.5m (R) Retro-reflective 4m (R) Receiver 6m Emitter (R)

0 Emitter or 4 wire, LOn/DOn selectable

P N O A

PNP logic output NPN logic output

Emitter

Analogue 0-10V

Specification common to all models

M8 axial plug connection

0Plastic housing

Note: Some model combinations are not available, please refer to "Available models" section of this data sheet.

Page 2

www.imopc.com

Miniature DC Photoelectric Switches QB

continued

Diffuse models

QBR6/0P-0E QBR6/0N-0E QBLL/0P-0E QBLL/0N-0E

Sensing distance 300mm 150mm Light source Red LED 660nm Laser 650nm Class II Switching frequency (Hz) 1000 4000 Output type PNP NPN PNP NPN Output function N/O,N/C selectable Current consumption no load (mA) 35 25 Max. output current (mA) 100 Max. output voltage drop (V) 2.4 Time delay (ms) 300 Operating indicator LED green Output indicator LED red Light spot at 160mm 12 x 12mm <0.7mm Reference material Kodak White 90%, 100 x 100mm

Background suppression models

QBLA/0P-0E QBLA/0N-0E QBLC/0P-0E QBLC/0N-0E Sensing distance 60mm 110m Light source Laser 650nm Switching frequency (Hz) 1000 Output type PNP NPN PNP NPN Output function N/O,N/C selectable Current consumption no load (mA) < 30 Max. output current (mA) 100 LASER protection class II Light spot <0.3mm at 40mm 0.7mm at 85mm Max. Grey scale displacement (%) 7 Operating indicator LED green Output indicator LED red Reference material Kodak Grey 18%, 100 x 100mm

Background suppression models

QBID/0P-0E QBID/0N-0E QBRB/0P-0E QBRB/0N-0E QBR3/0A-0E Sensing distance 150mm 100mm 80mm Light source IR 880nm Red LED 660nm Switching frequency (Hz) 800 1000 200 Output type PNP NPN PNP NPN 0 - 10Vdc Output function N/O,N/C selectable Current consumption no load (mA) 25 35 25 Max. output current (mA) 100 Max. output voltage drop (V) 2.4 Max. Grey scale displacement (%) 10 Operating indicator LED green Output indicator LED red Light spot 5 x 5mm at 60mm Reference material, 100mm x 100mm Kodak grey 18% Kodak White 90%

Specification

Page 3

www.imopc.com

Miniature DC Photoelectric Switches QB

continued

Clear Material Retro-reflective

QBRG/0P-0E QBRG/0N-0E QBLM/0P-0E QBLM/0N-0E

Sensing distance 500mm 1m Light source Red LED 660nm LASER 650nm Class II Switching frequency (Hz) 1000 4000 Output type PNP NPN PNP NPN Output function N/O,N/C selectable Current consumption no load (mA) 35 25 Max. output current (mA) 100 Max. output voltage drop (V) 2.4 Operating indicator LED green Output indicator LED red Light spot 12 x 12mm at 160mm 1mm at 300mm Reference material Reflector RL113G

Retro-reflective

QBRN/0P-0E QBRN/0N-0E QBRP/0P-0E QBRP/0N-0E Sensing distance 2.5m 3.5m Light source Red LED 660nm Switching frequency (Hz) 1000 Output type PNP NPN PNP NPN Output function N/O,N/C selectable Current consumption no load (mA) 35 Max. output current (mA) 100 Max. output voltage drop (V) 2.4 Light spot at 2m 75 x 75mm Max. distance 3m 4m Operating indicator LED green Output indicator LED red Reference material Reflector RL113G

Through beam Fibre optic

QBRS/00-0E QBRR/0P-0E QBRR/0N-0E QBRF/0P-0E QBRF/0N-0E Sensing distance - 6m 100mm (typical) Light source LED 660nm - Red LED 660nm Switching frequency (Hz) - 500 1000 Output type - PNP NPN PNP NPN Output function - N/O,N/C selectable Current consumption no load (mA) 20 25 25 Max. output current (mA) - 100 100 Max. output voltage drop (V) - 2.4 Ripple 10% Operating indicator LED green Output indicator - LED red Max. beam angle (°)6- Contamination indicator - Yes

Specification

Page 4

www.imopc.com

Miniature DC Photoelectric Switches QB

continued

Connections

Part Number Function Range Light Source Output Connection

QBLL/0P-0E Diffuse, Contrast 150mm LASER 650nm PNP M8 QBLL/0N-0E Diffuse, Contrast 150mm LASER 650nm NPN M8 QBR6/0P-0E Diffuse 300mm Red LED 660nm PNP M8 QBR6/0N-0E Diffuse 300mm Red LED 660nm NPN M8 QBLA/0P-0E Background Suppression 60mm LASER 650nm PNP M8 QBLA/0N-0E Background Suppression 60mm LASER 650nm NPN M8 QBRB/0P-0E Background Suppression 100mm Red LED 660nm PNP M8 QBRB/0N-0E Background Suppression 100mm Red LED 660nm NPN M8 QBLC/0P-0E Background Suppression 110mm LASER 650nm PNP M8 QBLC/0N-0E Background Suppression 110mm LASER 650nm NPN M8 QBID/0P-0E Background Suppression 150mm Infrared LED 880nm PNP M8 QBID/0N-0E Background Suppression 150mm Infrared LED 880nm NPN M8 QBR3/0A-0E Background / Foreground Suppression 80mm Red LED 660nm 0-10 Vdc M8 QBRG/0P-0E Retro-reflective, Transparent Objects 500mm Red LED 660nm PNP M8 QBRG/0N-0E Retro-reflective, Transparent Objects 500mm Red LED 660nm NPN M8 QBLM/0P-0E Retro-reflective 1m LASER 650nm PNP M8 QBLM/0N-0E Retro-reflective 1m LASER 650nm NPN M8 QBRN/0P-0E Retro-reflective 2.5m Red LED 660nm PNP M8 QBRN/0N-0E Retro-reflective 2.5m Red LED 660nm NPN M8 QBRP/0P-0E Retro-reflective 4m Red LED 660nm PNP M8 QBRP/0N-0E Retro-reflective 4m Red LED 660nm NPN M8 QBRS/00-0E Through beam emitter - Red LED 660nm - M8 QBRR/0P-0E Through beam receiver 6m Red LED 660nm PNP M8 QBRR/0N-0E Through beam receiver 6m Red LED 660nm NPN M8 QBRF/0P-0E Fibre optic amplifier - Red LED 660nm PNP M8 QBRF/0N-0E Fibre optic amplifier - Red LED 660nm NPN M8

Dimensions (mm)

Available Models

All models except QBRF

QBRF

PNP Connection NPN Connection 0-10v Connection Emitter Connection

12 3.2

RECEIVER TRANSMITTER

2.5

323.5

Button

10.5

dia. 10

TEACH IN

3.2

323.5

2.5

10.5

dia. 10

Yellow LED

Green LED

TECH IN