IMI BPGS10H Series, BPGS10HF, BPGS10HR User Manual

BPGS10H
PNEUMATIC
GRIPPER SYSTEM

BPGS10H

User Manual

We make

®

things MOVE

BPGS10H PNEUMATIC GRIPPER SYSTEM
User Manual

SCOPE OF THIS MANUAL

This instruction manual supports Bimba standard components only. If special components are included
based on a customer’s specifications or special request, it is the customer’s responsibility to consult
support materials and technical support specific to these special components provided by the third party
manufacturers. Bimba assumes no liability for misuse, misapplication, or support for components that are
not the Bimba brand.

WARNING

Using the equipment in a manner not specified in this manual can impair the safety of the equipment.

Technical support is available from:

Bimba Manufacturing Company
25150 S Governors Hwy University Park, Illinois 60484
Phone: [phone] Toll Free: 800-44-BIMBA Fax: [phone]
Email: [e-mail] • www.bimba.com

2

BIM-BPGS10H-0719 Rev 1 | For Technical Assistance: 800-442-4622

BPGS10H PNEUMATIC GRIPPER SYSTEM

User Manual

TABLE OF CONTENTS

Purpose 4
Scope 4
Safety 4
Equipment Required 4
Procedures 4

Gripper Unlock 5
Jaw Removal 5
Jaw Replacement
Installing a Side Plate 7
Installing a Indirect Sensor 8
Pad Replacement 9
Calibrating Indirect Sensor 10

Cleaning and Maintenance 11

Quality Assurance Requirements 11

Specifications 11

6

BIM-BPGS10H-0719 Rev 1 | For Technical Assistance: 800-442-4622

3

BPGS10H PNEUMATIC GRIPPER SYSTEM
User Manual

PURPOSE

This document instructs the operator how to use the BPGS10H Grippers

SCOPE

This work instruction covers Port Size and Operation, unlocking of jaws and setting open jaw angles.

SAFETY

Safety glasses or approved eye protection must be worn at all times. Steps involving chemical bonding require the use of
proper ventilation and skin protection in accordance with manufacturer's MSDS.

EQUIPMENT REQUIRED

Standard Bench Tools.

PROCEDURES

1. Port size and operation - For Top, Right, Bottom and Left Air Port Orientation
a.) Ports are available in 1/8" NPS or 1/8" Rc

Gripper Open

Gripper Close

2. For Rear Air Port Orientation:
a.) Ports are available in 1/8" NPS, with hexagon socket head straight fittings supplied with telescope

BPGS10TELXXP

Gripper Open

Gripper Open

4

BIM-BPGS10H-0719 Rev 1 | For Technical Assistance: 800-442-4622