IMG STAGE LINE BEAM-4/RGBW Instruction Manual
BEAM-4/RGBW Order No. 38.0230
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS
INSTRUCTION MANUAL
LED Beam Moving Bar, RGB W
2
Order No. 38.0230
BEAM-4/RGBW
Table of contents
Warning ................................................................................................
...................................................................... 3
Unpacking Instructions ......................................................................................................................................... 3
LED Expected Lifespan ......................................................................................................................................... 3
Safety Instructions ................................................................................................................................................. 3
Operating Determinations ................................................................................................................................... 5
Rigging ................................................................................................................................................................... 5
Connection with the mains ................................................................................................................................. 6
Description of the device ......................................................................................................................................... 7
Overview ................................................................................................................................................................ 7
Frontside ................................................................................................................................................................. 8
Backside ................................................................................................................................................................. 8
Installation .................................................................................................................................................................. 9
Set Up and Operation ............................................................................................................................................... 9
Control Modes ....................................................................................................................................................... 9
One BEAM-4/RGBW (Auto and Manual) ......................................................................................................... 9
One BEAM-4/RGBW (Sound-controlled) .......................................................................................................... 9
Multiple BEAM-4/RGBWs (Master/Slave control) ............................................................................................ 9
Multiple BEAM-4/RGBWs (DMX Control) ........................................................................................................ 10
Fixture Linking ....................................................................................................................................................... 11
Data Cabling ....................................................................................................................................................... 11
Control Panel ....................................................................................................................................................... 12
Control Mode ...................................................................................................................................................... 12
DMX Addressing .................................................................................................................................................. 12
Menu Overview ................................................................................................................................................... 13
Main Menu Options ............................................................................................................................................ 15
1. Manual Mode ............................................................................................................................................... 15
1.1 Manual Mode - LED ................................................................................................................................... 15
1.2 Manual Mode - Pan ................................................................................................................................... 16
1.3 Manual Mode - Tilt ..................................................................................................................................... 17
2. Built-in Program Mode ................................................................................................................................. 17
3. Sound-controlled Mode. ............................................................................................................................. 17
4. DMX-512 Mode ............................................................................................................................................. 17
5. Master/Slave Mode ..................................................................................................................................... 17
6. Settings .......................................................................................................................................................... 18
6.1 Settings – BL Time ........................................................................................................................................ 18
6.2 Settings – Adjust .......................................................................................................................................... 18
6.3 Settings – Reset ........................................................................................................................................... 18
6.4 Settings – Power ......................................................................................................................................... 18
6.5 Settings – Error ............................................................................................................................................. 18
6.6 Settings – Lamp .......................................................................................................................................... 18
6.7 Settings – Use .............................................................................................................................................. 18
6.8 Settings – Sensor ......................................................................................................................................... 19
6.9 Settings – About ......................................................................................................................................... 19
DMX Channels ..................................................................................................................................................... 20
1 channel .......................................................................................................................................................... 20
22 channels ....................................................................................................................................................... 20
26 channels ....................................................................................................................................................... 21
Maintenance ........................................................................................................................................................... 24
Replacing the Fuse ............................................................................................................................................. 24
Troubleshooting ....................................................................................................................................................... 24
No Light ................................................................................................................................................................ 24
No Response to DMX .......................................................................................................................................... 25
Product Specifications ............................................................................................................................................ 26
Dimensions ............................................................................................................................................................... 27
Notes ......................................................................................................................................................................... 28
3
Order No. 38.0230
BEAM-4/RGBW
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• BEAM-4/RGBW
• PowerCon to Schuko
(1,5
m)
• 1 bracket and 3 quick-locks
• User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
• be qualified
• follow the instructions of this manual
4
Order No. 38.0230
BEAM-4/RGBW
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
• Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
• Never remove warning or informative labels from the unit.
• Never use anything to cover the ground contact.
• Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
• Never place any material over the lens.
• Never look directly into the light source.
• Never leave any cables lying around.
• Never loosen the screws of the rotating gobo otherwise you risk opening of the ball bearing.
• Do not insert objects into air vents.
• Do not connect this device to a dimmerpack.
• Do not switch the device on and off in short intervals, as this will reduce the device’s life.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Only u
se the device indoors, avoid contact with water or other liquids.
• Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
• Only operate the device after having familiarized with its functions.
• Avoid flames and do not put close to flammable liquids or gases.
• Always keep the case closed while operating.
• Always allow a free air space of at least 50 cm around the unit for ventilation.
• Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
• Make sure that the device is not exposed to extreme heat, moisture or dust.
• Make sure that the available voltage is not higher than stated on the rear panel.
• Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
• If the lens is obviously damaged, it has to be replaced.
• If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
• If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
• If your BEAM-4/RGBW fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your IMG Stage Line dealer for service.
• For adult use only. Moving head must be installed beyond the reach of children. Never leave the unit
running unattended.
• Never attempt to bypass the thermostatic switch or fuses.
• For replacement use fuses of same type and rating only.
5
Order No. 38.0230
BEAM-4/RGBW
• The user is responsible for correct positioning and operating of the device. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.
• This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
• During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• WARRANTY: Till one year after date of purchase.
Operating Determinations
• This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
• The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
• The maximum ambient temperature t
a
= 40°C must never be exceeded.
• The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
• If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
• Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
• If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
• Use a clamp to mount the projector, with the mounting bracket, to the trussing system.
• The projector must never be fixed swinging freely in the room.
• The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
• When rigging, derigging or servicing the projector, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
6
Order No. 38.0230
BEAM-4/RGBW
The BEAM-4/RGBW can be placed o
n a flat stage floor or mounted to any kind of truss with a clamp and
quick-locks.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International EU Cable UK Cable US Cable Pin
L
BROWN RED YELLOW/COPPER PHA
SE
N
BLUE BLACK SILVER NEUTRAL
YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!
7
Order No. 38.0230
BEAM-4/RGBW
Description of the device
Features
The BEAM-4/RGBW is an innovative concept and brings continuous rotating to LED Bars in a
compact housing but still with a surprisingly high light output.
• Very fast movement
• Continuous pan-rotation
• Light source: 4 x 10W RGBW LED
• Output@2m: 7000lux
• Input voltage: 100-240V, 60/50Hz
• Power consumption: 60W
• DMX channels: 1, 22, 26
• Clear LCD display for easy setup
• Sound Control
• Control modes: DMX, Auto, Manual, Sound, Slave
• Control protocol: DMX-512
• 5-pin DMX signal connector IN/OUT
• 3-pin DMX signal connector IN/OUT
• Blue-White power connector IN/OUT 100-240V
• Dimmer: 0-100%
• Strobe: 0-20Hz
• Pan: 540° or continuous, depending on DMX Channel
• Tilt: 200°
• Pan/Tilt resolution: 16-bit
• Beam Angle: 3°
• IP-Rating: IP20
• Housing: Metal & Flame retardant plastic
• Dimensions: 555 x 94 x 220 mm (LxWxH)
• Weight: 6,9 kg
Overview
Fig. 01
8
Order No. 38.0230
BEAM-4/RGBW
Frontside
Fig. 02
01) Moving head with 4 x 10W RGBW lens
es
02) LCD Display + control buttons
03) 5-pin DMX signal connector OUT
04) 5-pin DMX signal connector IN
05) Power switch ON/OFF
06) Fuse T3A/250V
Backside
Fig. 03
07) Blue-White power connector IN 100-240V
08) B
lue-White power connector OUT 100-240V
09) 3-pin DMX signal connector IN
10) 3-pin DMX signal connector OUT
9
Order No. 38.0230
BEAM-4/RGBW
Installation
Remove all packing materials from the BEAM-4/RGBW. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be sound-controlled as it is equipped
with a built-in microphone.
Control Modes
There are 5 modes: • Stand-alone (Auto)
• Manual
• Soun
d-controlled
• Master/Slave
• DMX-512 (1, 22, 26CH)
One BEAM-4/RGBW (Auto and Man
ual)
01) Fasten the effe
ct light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) When the BEAM-4/RGBW is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 16-18 for more information about the Auto Mode and Manual Mode.
One BEAM-4/RGBW (Sound-contro
lled)
01) Fasten the effe
ct light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Turn on the music. If the device is set to sound-control, then the BEAM-4/RGBW will react to
the beat
of the music. Please see page 18 for more information about the sound-control options.
Multiple BEAM-4/RGBWs (Mas
ter/Slav
e control)
01) Fasten the effe
ct light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Use a 3-pin XLR cable to connect the BEAM-4/RGBW.
The pins:
01) Earth
02) Signal -
03) Signal +
03) Link the units
as shown in fig. 04
. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on page 18 (Auto Mode or
Sound-controlled Mode). This means that you can set your desired operation mode on the master
device and all slave devices will react the same as the master device.
Loading...