Imex LX33G Green Beam
Three-line laser
Imex LX33G
Congratulations on your purchase of a quality Imex self levelling line laser.
These lasers have been designed for the professional and incorporate the latest laser
technology. This highly versatile tool can be used on the floor, elevating tripod or on a
wall bracket.
The following operating manual has been designed to assist in getting the optimum
performance from your instrument. Please read carefully before using the instrument,
and observe all safety conditions and warnings.
1. About the Instrument - Functions
1.1 Instrument Overview
Control panel Carry handle
Vertical beam windows
Battery
On/off switch
Fine adjustment screw
Horizontal beam window
Tripodic base Adjustable feet
1.2 Control Panel
Level vial
Outdoor mode button
(activates pulse mode)
Horizontal beam button
(activates horizontal beams)
Vertical beam button
(activates vertical beam)
1.3 Detector (LX33GD only)
Level vial Laser receptor band
Staff bracket
Level indication
Lights
Audible buzzer
2. Basic Operation
1. Turn on: Turn on using the on/off switch. This releases the pendulum from its lock
position, activates the horizontal beam and allows all beams to be turned on using the
buttons on the control panel.
2. Horizontal Beam: Horizontal
beam turns on when main switch is
turned on, to turn press the
horizontal button once. Press the
horizontal button once again to
turn horizontal beam off.
3. Vertical Beams: To turn on
vertical beams press the vertical
beam button, this activates front
vertical beam and the plumb spot.
Press the vertical button again to
activate the other vertical beam,
you now have
2 vertical beams emitted at 90°to
each other also forming a cross &
plumb point) on the ceiling.
Press vertical button again to turn vertical beams off.
4. Turn off: To turn off completely, switch the on/off switch to off position, this
deactivates all beams and locks pendulum.
-The level vial is a guide only, unit will self level providing it’s within 3º of level.-
3. Outdoor Use LX33GD
(with detector)
For greater versatility this tool has a pulse mode which enables the tool to be used in
conjunction with a detector (LX33GD) extending the tools range to 30m.
-To enable outdoor mode, turn instrument laser beam on then press the outdoor mode
switch once. This enables the beam pulsate mode so it can be picked up by the
detector.
-Turn on detector (on/off switch), You can now check level and 90º set-outs outdoors
using optional detector
-Press the outdoor mode button once again to disable outdoor mode
4. Battery
The Imex LX33G is powered by a 3.7VDC Li-ion battery
Battery life is approx 20hrs with all beams operating and charge time of approx 3
hours.
To charge battery plug supplied charger unit into 240v power outlet and plug charging
pin into battery. Charger indication light will show solid red when the battery is
charging, charger lamp indicator will change to solid green when charge is complete.
5. Calibration & Level Checking
The accuracy of the tool is +/- 1.5mm in 10m.
Before use, check that the instrument is within tolerance.
-Place instrument on a solid base i.e. bench top, approx 5m from a wall.
-Turn on horizontal beam and vertical beams
-To check horizontal beam, point cross-line towards wall & mark the wall at horizontal
level point
-Rotate instrument on tripodic base towards the left end of horizontal beam and mark
wall again, repeat this procedure at the right end of the horizontal beam
-You should now have three marks on the wall. If these points are less than
1.5mm apart the instrument is ok to use if difference exceeds 1.5mm send back to
dealer for calibration.
To check vertical accuracy, utilise a known plumb point such as a doorway/window
frame and check that vertical beam lines up.
6. Transportation and Storage
The laser must be stored in a cool dry environment, free of dust and moisture.
On the completion of use the main On/Off switch must be switched to the off position
for transportation.
7. Warranty
The Imex LX33G are covered by a 2 year warranty for more details please visit:
www.imexlasers.com.au
8. Accessories
The LX33 can be used with a number of accessories, these include;
-Elevating tripod -Wall mount bracket
-Floor–ceiling laser pole -Levelling staff & more
9. Specifications
Specifications Imex LX33G
Light Source 532-650nm Green beam class 2M<5mW
Accuracy
± 1.5mm /10m
Beams 1 Horizontal, 2 vertical @ 90° and plumb spot
Damping System Self levelling magnetic dampened pendulum
Working Distance
15m (30m with detector)
Battery
3.7v Li-ion
Battery Life
approx 20 hours (all beams)
Battery charge time
approx 3 hours
Dimensions
220 x 120 x 120mm
Copyright © International Measuring Equipment 2012
Free call 1800 669 110
Loading...