iMettos HLQ-14, HLQ-8 Instruction Manual

Cutting Mixer Machine

Instruction Manual

Please read this instruction manual carefully before operating this equipment

Model: HLQ-14

Preface

 In order to make sure the machine can be used efficiently, we provide concerned

details and information of the machine in this manual, include specifications, operation

procedures and instructions.

 This manual should be submitted to the qualified operators, to help them get familiar

with the operation and maintenance of the machine.

 Safety Tips! Read carefully before use.

• Position on a flat, stable surface.

• A service agent/qualified technician should carry out installation and any repairs if required.

Do not remove any components on this product.

• DO NOT immerse the appliance in water.

• DO NOT place hands in the cutting bowl

• Suitable for indoor use only.

• Always switch off and disconnect the power supply to the appliance when not in use.

• Regularly check the screws fixing the blades to the cutting discs and tighten as necessary.

• This appliance must only be used in accordance with these instructions and by persons

competent to do so.

• This appliance is not suitable for use by children.

• Keep all packaging away from children. Dispose of the packaging in accordance to the

regulations of local authorities.

• If the power cord is damaged, it must be replaced by an agent or a recommended

qualified technician in order to avoid a hazard.

1

Chapter 1 General Introduction

1.1 Product Function

HLQ14 Cutting mixer machine produced by our company is mainly used for food
processing fields, which can process different kinds of roots, stems, leaves and vegetable
into paste speedly and effectively, which can process meat and accessories into glue. It can
also mix different kinds of stuffings evenly, which is the ideal equipment for processing
dumpling and buns, and also the best choice for feed processing field.

1.2 Performance and Features
Principle of relative motion is adopted in this machine, which makes the processing food
and high-speed rotating blades-unit to do vertical relative motion, and differential rotary cut
the food into paste. Steamline appearance and fully enclosed box type body are designed,
all motivation and driving devices are installed inside of the body, which make the machine
with fine craftmanship and excellent structure.
The machine blade speed, pot speed, blade material and hardness are designed as the
best combination. The blades are sharp, rable and sophisticated, which ensures good
cutting efficience, slight temperature lifting and short cutting time, which also improves the
emulsification, the elastic, the smooth and the yield of stuffings.
Toutching switch is adopted in the controlling system of HLQ14 Cutting mixer machine,
which is with features of good waterproof properties, safety, reliability, long service life, low
noise, simple operation and easy maintenance.

Chapter 2 Structure and Principle

2.1 Main structure

The machine is mainly composed of frame, turbine driving device, blades-unit, dish basin,
basin cover, pulley mechanism, motor and other main components(see picture 1).

2

Speed reducer

Machine body

belt driving device

blades-unit

dish basin

motor

basin cover

Picture 1: structure diagram

2.2 Material safety

The machine parts which contact with food diretly are made of material strictly in
accordance with the requests of food safety and health standards, which is not rust,
corrosion, nontoxic and harmless to buman health even after using for a long time.

2.3 Working principle

When the machine is working, close the basin cover, and put different kinds of roots, stems,
leaves, vegetable, meat and so on into the basin, the food rotates anti-clockwise with the
basin, which will be cut into paste when coming across with vertically rotating blades(size of
the paste is to be controlled by adjusting the cutting time).

2.4 Electrical circuit diagram

The machine is equipped with an input cable with cross section 3X1.0 mm2, length 1.85m.
The machine should be connected to power source as 220V/50Hz.
Attention: socket must be equipped with switch, to make sure power can be cut off on time.

3