iMettos HLC-300 Instruction Manual

Model: HLC-300

Please read this instruction manual carefully before operating this equipment

Vegetable Cutter

Instruction Manual

- -

- 1 -

CONTENTS

1.SAFETY

2.INFORMATION ON SAFETIES

3.PERFORMANCE PARAMETER

4.INSTALLATION

5.OPERATION INSTRUCTIONS

6.CLEANING AND MAINTENANCE

7.DISK

8.EXPLODED DRAWING- 1 -

9.CIRCUIT DIAGRAM

10. WASTE DISPOSAL

12. WARRANTY

- -

- 2 -

1.Safety Tips

• Position on a flat, stable surface.

• A service agent/qualified technician should carry out installation and any repairs if

required. Do not remove any components on this product.

• DO NOT immerse the appliance in water.

• DO NOT place hands in either food chute.

• DO NOT attempt to cut frozen food with the appliance.

• Suitable for indoor use only.

• Always switch off and disconnect the power supply to the appliance when not in use.

• Regularly check the screws fixing the blades to the cutting discs and tighten as

necessary.

• This appliance must only be used in accordance with these instructions and by persons

competent to do so.

• This appliance is not suitable for use by children.

• Keep all packaging away from children. Dispose of the packaging in accordance to the

regulations of local authorities.

• If the power cord is damaged, it must be replaced by an agent or a recommended
qualified technician in order to avoid a hazard.

Read this instruction manual before using and keep them
available at all times!

- -

- 3 -

2. INFORMATION ON SAFETIES

2.1. GENERAL PRECAUTIONS

• THE VEGETABLES CUTTING MACHINE MUST BE MANAGED BY SKILLED PERSONNEL,FAMILIAR WITH THE

INSTRUCTIONS FOR USE AND SAFETY CONTAINED IN THIS MANUAL.

• EVEN IF THE MACHINE COMES WITH SEVERAL SAFETY SYSTEMS, AVOID SETTING THE HANDS NEAR THE
CUTTING DISCS AND MOVING PARTS.

• BEFORE ANY CLEANING AND MAINTENANCE OPERATIONS, CHECK TO MAKE SURE THE MACHINE IS

DISCONNECTED FROM THE MAINS.

• PERIODICALLY CHECK CABLES AND ELECTRIC ELEMENTS CONDITIONS.

• NEVER USE THE CUTTING MACHINE WITH FREEZED FOOD.

• NEVER REPLACE PARTS OF THE MACHINE BY YOURSELF, BUT APPLY TO THE ASSISTANCE SERVICE.

• THE APPLIANCE CAN NOT BE THE DISABLED OR CHILDREN OR BY A LACK OF EXPERIENCE AND

KNOWLEDGE OF THE PEOPLE TO USE, EXCEPT BY THE RIGHT PERSON RESPONSIBLE FOR THEIR SAFETY
SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE.

2.2 ELECTRICAL SAFETIES

THERE ARE TWO MICRO-SWITCHES ON THE COVER OF THE MACHINE,
THEIR ROLE ARE: 1. WHEN LIFTING CRESCENT-SHAPED INLET PRESSURE
HANDLE
TO A CERTAIN HEIGHT, THE MACHINE STOPS RUNNING, IN ORDER TO PREVENT
ACCIDENTALLY INSERT YOUR HANDS INTO CRESCENT-SHAPED INLET AND
BRUISED
BY THE MACHINE; 2. WHEN YOU OPEN THE COVER UP, THE MACHINE STOPS
RUNNING,
TO ENSURE SAFE OPERATION.

A RELAY REQUIRING REQUIRES THE VOLUNTARY RESTART (ACTIVATION) OF THE
MACHINE WHEN THE CURRENT IS LACKING HAS BEEN SET ON THE LOW VOLTAGE
CONTROL CIRCUIT. FOR THE PERFECT INSULATION OF ALL THE ELECTRIC
ELEMENTS AND THE REMARKABLE RESISTANCE OF THE ALUMINIUM TREATMENT,
COUPLED WITH THE MATERIAL USED, OUR MACHINES CAN BE INSTALLED
TO WORK INSIDE MOIST PREMISES.

3. PERFORMANCE PARAMETER

3.1. TECHNICAL FEATURES

MODEL

DIMENSIONS
CM.

WEIGHT
KG.

POWER
WATT

ELECTRICAL
CONNECTION

REVS
DISC

HLC-300

57X23X51

22.50

550

110/1/50~60
220~240/1/50~60
380/1/50~60

270

3.2. SUPPLY CONDITIONS AND DISPOSAL OF PACKINGS

THE CUTTING MACHINE IS PACKED IN A STURDY CARDBOARD BOX WITH INTERNAL SHAPED EDGES WHICH
GUARANTEE THE PERFECT INTEGRITY OF THE MACHINE DURING TRANSPORT.
ALL THE PACKING COMPONENTS (CARTON, FOAM, STRAPS, AND SO ON) CAN EASILY BE DISPOSED OF AS
HOUSEHOLD RUBBISH